 |
 |
 |
|
We are pleased to announce the launch of our Landslide Series of Professional Powered Mixers. Staying true to the Seismic Audio mission, we have kept your budget in mind without compromising quality. The Seismic Audio Landslide delivers big sound in a little package. If you are looking for a compact system solution without the compact system solution sound, this is the powered mixer for you. The Landslide mixers are lean and mean and designed to provide the highest quality sound for all your audio projects while keeping you under budget.
Seismic Audio Landslide Power Mixers
- Model: LandSlide-8P
- 8 Channel DSP Professional Powered Mixer
- 8 discrete input channels with gold plated XLR and balanced 1/4"
- 200 Watts RMS at 8 ohm
- 400 Watts RMS at 4 ohm
- 600 Watts RMS at 2 ohm
- Overload Protection
- Ultra low noise discrete mic pre-amp with +48 V phantom power
- Balanced inputs for highest signal integrity
- Ultra musical 2-band EQ on all channels
- Peak LED on each input channel
- Aux bus for external effect and monitoring
- Simulate effect (16 DSP)
- RCA input / output
- Highly accurate 5 segment bargraph meters
- Separate master mix outputs
- 5 Band Graphic EQ
- 2 SpeakOn per channel output (4 total SpeakOn)
Specifications Mono Inputs
- Mic Input B: Electronically balanced discrete input configurations
- Bandwidth: 10 Hz to 60 kHz +/- 3 db
- Distortion (THD&N): 0.01% at +4 dbu, 1kHz, Bandwidth 80 kHz
- Mic E.I.N. (22 Hz - 22 kHz): -129.5 dBu, 150 ohm source
-117.3 dBqp, 150 ohm source
-132.0 dBu, input shorted
-122.0 dBqp, input shorted - TRIM range: +10 dBu to 60 db
- Line Input: Electronically balanced
- Line Level Range: +10dBu to 4 dBu
Equalization
- Hi: 12 kHz +/- 15 dB
- Low: 80 Hz +/- 15 dB
Master Mix Section
- Max Output: +22 dBu balanced
- Aux Send Max Out: +22 dBu unbalanced
- Control Room Out: +22 dBu unbalanced
- Signal to noise ratio: +112 dB all channels at unity gain
Power Supply
- Main Voltages USA/Canada: ~120V ac, 60 Hz
U.K./Australia: ~240V ac, 50 Hz
|
|
|
 |
|
 |
|
