Pro Audio Speakers Without Pro Audio Prices

The Seismic Audio PA System gives you high end sound quality at a reasonable price! The SA-155T Speaker Cabinets  deliver every sound loud and clear with dual Pro Audio 15 inch woofers, 1.5 inch titanium tweeter driver, a frequency response of 45Hz to 20,000Hz, and 700 watts RMS, 1400 watts peak power.  These amazing 18 inch Pro Audio PA Subwoofer Cabinets deliver the low end sounds loud and clear with an 18 inch woofer and 500 watts RMS, 1000 watts peak power each.  The Landslide mixers are lean and mean and designed to provide the highest quality sound for all your audio projects while keeping you under budget.  It delivers a big sound in a little package!  It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, this PA system will deliver the sound you want!  Also included is a four pack of 35 foot Speakon Speaker Cables. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Package #: Landslide12-PKG34
  
  Speakers
  
  • Model #: SA-155T (Set of 2)
  • Dual 2-way 15" Pro Audio Speaker
  • 700 Watts RMS; 1400 Watts Peak
  • Woofer has 50 oz magnet and 2" voice coil
  • 1.5" Titanium tweeter driver with 10oz. magnet and 1" throat
  • Two 1/4" inputs and two Speakon inputs
  • Frequency Response: 45Hz to 20kHz
  • Crossover: 12/18db per octave 3Khz high power 
    w/ dual glass bulb tweeter protection
    
  • Impedance: 4 Ohms
  • Sensitivity: 96db
  • Dual ports
  • Full metal grill
  • Recessed Handles
  • Black carpeted covering w/ black metal corners
  • LxWxD: 42"x20"x16"
  • Weight:  73 lbs per cabinet
    
  • Condition: New
  • One Year Warranty
  
  
  Power Mixer
  
  
  
  • Model: LandSlide-12P
  • 12 Channel DSP Professional Powered Mixer
  • 12 discrete input channels with gold plated XLR and balanced 1/4"
  • 200 Watts RMS at 8 ohm
  • 400 Watts RMS at 4 ohm
  • 600 Watts RMS at 2 ohm
  • Overload Protection
  • Ultra low noise discrete mic pre-amp with +48 V phantom power
  • Balanced inputs for highest signal integrity
  • Ultra musical 2-band EQ on all channels
  • Peak LED on each input channel
  • Aux bus for external effect and monitoring
  • Simulate effect (16 DSP)
  • RCA input / output
  • Highly accurate 5 segment bargraph meters
  • Separate master mix outputs
  • 5 Band Graphic EQ
  • 2 SpeakOn per channel output (4 total SpeakOn)
  
  
  Specifications

  Mono Inputs

  • Mic Input B: Electronically balanced discrete input configurations
  • Bandwidth: 10 Hz to 60 kHz +/- 3 db
  • Distortion (THD&N): 0.01% at +4 dbu, 1kHz, Bandwidth 80 kHz
  • Mic E.I.N. (22 Hz - 22 kHz): -129.5 dBu, 150 ohm source
    -117.3 dBqp, 150 ohm source
    -132.0 dBu, input shorted
    -122.0 dBqp, input shorted
  • TRIM range: +10 dBu to 60 db
  • Line Input: Electronically balanced
  • Line Level Range: +10dBu to 4 dBu

  Equalization

  • Hi: 12 kHz +/- 15 dB
  • Low: 80 Hz +/- 15 dB

  Master Mix Section

  • Max Output: +22 dBu balanced
  • Aux Send Max Out: +22 dBu unbalanced
  • Control Room Out: +22 dBu unbalanced
  • Signal to noise ratio: +112 dB all channels at unity gain

  Power Supply

  • Main Voltages USA/Canada: ~120V ac, 60 Hz
  U.K./Australia: ~240V ac, 50 Hz

  
  
  
  

  Subwoofers

  
  

  • Model #: SAP-18SFF (Pair)
  • 18" High Power Subwoofer
    
  • 500 Watts RMS; 1000 Watts Peak
  • Woofer has 90 oz magnet and 3" kapton voice coil
  • Two 1/4" inputs and two Speakon inputs
  • Frequency Response: 20Hz to 5K Hz
  • Impedance: 8 Ohms
  • Sensitivity: 98db
  • Speaker mount on top of cabinet
    
  • Full metal grill
  • Recessed Handles
  • Black carpeted covering w/ black metal corners
  • LxWxD: 28"x22"x22"
  • Weight:  70 lbs per cabinet
    
  • Condition: New
  • One Year Warranty

  
  

  Power Amplifier

  • Model Number: MBG-4000
  • Power Handling:
  • 2 x 500 Watts @ 8 Ohms
  • 2 x 1000 Watts @ 4 Ohms
  • Momentary Peak Output 4000 Watts @ 4 Ohm Bridge
  • Technical Specs
  • Input level: 0 dB
  • Input Resistance: 20K ohm
  • Rising Speed: 45v/us (BTL-MONO 90v/us)
  • Distortion for adjustment: <0.01%
  • Signal Noise Ratio: >95 dB
  • Frequency Response: 20Hz-20K Hz
  • General Harmonic Wave Distortion: 20Hz-20K Hz <0.1%
  • Operation Power Voltage: AC 110V, 50-60 Hz
  • Front of Amplifier:
  • Channel A and B volume controls
  • Clip maximum level indicator
  • Signal indicator
  • Power indicator
  • Power red when started
  • Rear of Amplifier
  • Channel A and B signal input (XLR & 1/4" jack connectors)
  • Channel A and B power output (Speakon & binding post connectors)
  • Stereo/Bridge Mono switch
  • Lift/Ground switch
  • Fuse: 10A
  • AC input: 110V, 50-60 Hz
  • Dual cooling Fan
  • Dimensions: 2 Spaces / Fits standard 19" rack cases
  • Weight: 18.5 lbs

  
  

  Speaker Cables
  
  
  • Model #:  TW12S35 (Four Pack)
  • Speakon to Speakon Connectors
  • 12 Gauge Wire
  • 2 Conductor
  • PVC Wrapped
  • Shielded
  • Locking features
  • Color:  Black
  • Length: 35 Feet
  • Quantity: Two Cables
  • Condition: NEW
  • One Year Warranty