{"title":"Cable Connectors","description":"\u003ch3\u003eCable Connectors\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.seismicaudiospeakers.com\/cable-connectors\/c\/559\"\u003e\u003c\/a\u003eIf you need some additional or replacement cable connectors for your audio cables, Sesimic Audio Speakers is the place for you. We offer a massive selection of cable connectors for all kinds of pro audio equipment. Find Speaker Cable Connectors, Microphone Cable Connectors, Instrument Cable Connectors and more. We stock both male and female XLR cable connectors along with 3 pin cable connectors, 4 pin cable connectors and 5 pin cable connectors. We also carry many 1\/4\" cable connectors, SpeakOn cable connectors and even right angle cable connectors. Get connected with audio cable connectors for less at Seismic Audio Speakers.\u003c\/p\u003e","products":[{"product_id":"panel-mount-connector-8-pole-speakon","title":"SAPT10 - 8 Pole Speakon Panel Connector","description":"\u003cp\u003eThe SAPT10 8-pole Speakon panel connector is built for sound engineers, venue techs, and mobile performers who need reliable panel-mount connections for multi-amplified PA systems and complex audio installations. This professional-grade connector handles the demanding signal routing requirements of bi-amped and tri-amped speaker systems.\u003c\/p\u003e\n\u003cp\u003eEight poles provide the connectivity needed for advanced speaker configurations, allowing separate connections for low-frequency, mid-frequency, and high-frequency drivers within the same connector. The robust construction ensures clean signal transfer without interference or signal degradation, critical for maintaining audio quality in professional live sound applications.\u003c\/p\u003e\n\u003cp\u003eThe connector requires a standard \"G\" size panel mounting hole for installation, making it compatible with most professional audio equipment racks and custom installations. The secure locking mechanism prevents accidental disconnections during performances or events, while the all-metal construction withstands the physical demands of touring and permanent installations.\u003c\/p\u003e\n\u003cp\u003eThis panel connector excels in church sound systems, venue installations, and mobile DJ rigs where multiple amplifier channels need to connect to bi-amped or tri-amped speakers. It's particularly valuable for custom rack builds and repair applications where existing connectors have failed or need upgrading.\u003c\/p\u003e\n\u003cp\u003eInstallation requires access to the rear panel for mounting and wiring. The connector accepts standard Speakon cable plugs and provides secure termination for multi-conductor speaker cables.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs the SAPT10 with a one-year warranty and ships nationwide, giving you professional connectivity at a price that works for working musicians and sound professionals.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e8-Pole Speakon Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Hole Size\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eG Size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMulti-amp systems, venue installations, rack builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is an 8-pole Speakon connector used for?\u003c\/h3\u003e\n\u003cp\u003eAn 8-pole Speakon connector allows you to run multiple amplifier channels through a single cable connection. This is essential for bi-amped and tri-amped speaker systems where separate amplifiers power the woofers, mids, and tweeters. Each pair of poles carries one amplifier channel, so an 8-pole connector can handle up to 4 separate amplifier channels through one cable connection.\u003c\/p\u003e\n\u003ch3\u003eWhat size hole do I need to mount this connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT10 requires a \"G\" size panel mounting hole, which is the standard size for Speakon connectors in professional audio equipment. This is approximately 24mm in diameter. Most professional audio equipment already uses this standard, making the SAPT10 compatible with existing rack systems and speaker cabinets.\u003c\/p\u003e\n\u003ch3\u003eCan I use regular 4-pole Speakon cables with this 8-pole connector?\u003c\/h3\u003e\n\u003cp\u003eYes, you can plug 4-pole Speakon cables into this 8-pole panel connector. The 4-pole cable will only use the first 4 poles, which is fine for standard single-amp or bi-amp applications. However, to take advantage of all 8 poles, you'll need 8-conductor speaker cable terminated with 8-pole Speakon plugs.\u003c\/p\u003e\n\u003ch3\u003eIs this suitable for permanent venue installations?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. The SAPT10's metal construction and secure panel mounting make it ideal for permanent installations in churches, venues, and studios. The locking mechanism prevents accidental disconnections, and the panel-mount design provides a clean, professional appearance while protecting the connection from physical damage.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to install this panel connector?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic tools including a drill for the mounting hole (if not already present), screwdriver for terminal connections, and wire strippers for cable preparation. The connector includes mounting hardware, but you'll need to provide the multi-conductor speaker cable and appropriate termination tools for the wire connections inside the connector housing.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411357320,"sku":"SAPT10","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt10_1000_d224a358-ca6a-4e24-8b88-a7dc242fc3cc.jpg?v=1765914482"},{"product_id":"panel-mount-connectors-8-pole-speakon","title":"SAPT10 (2 Pack) - 8 Pole Speakon Panel Connector","description":"\u003cp\u003eProfessional panel mount Speakon connectors designed for custom PA builds, rack systems, and permanent installations where reliable speaker connections matter. The SAPT10 2-pack gives you the flexibility to create custom connection panels or repair existing equipment with industry-standard 8-pole Speakon compatibility.\u003c\/p\u003e\n\u003cp\u003eThese panel connectors handle high-current speaker signals with secure twist-lock connections that won't vibrate loose during transport or performance. The 8-pole design supports complex bi-amp and tri-amp configurations, making them ideal for line array builds and advanced PA setups where multiple amplifier channels feed individual drivers.\u003c\/p\u003e\n\u003cp\u003eBuilt to \"G\" size panel mounting specifications, these connectors fit standard rack panels and speaker cabinet connection plates. The robust construction handles the demands of touring rigs and permanent installations alike. Whether you're building custom speaker cabinets, creating patch panels for venue installations, or need reliable replacements for worn connectors, these panel mounts deliver the durability pros expect.\u003c\/p\u003e\n\u003cp\u003ePerfect for sound engineers building custom racks, venue installers creating permanent connection points, and manufacturers needing reliable OEM components. Churches upgrading their sound systems and mobile DJs customizing their rigs will find these connectors essential for professional-grade connections that eliminate signal dropouts and connection failures.\u003c\/p\u003e\n\u003cp\u003eInstallation requires standard panel cutting tools for \"G\" size mounting holes. Each connector includes all necessary mounting hardware for secure panel attachment. Backed by Seismic Audio's one-year warranty and fast shipping, these connectors provide the reliability your sound system demands.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT10 (2 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e8 Pole Speakon Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Size\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e\"G\" Size Panel Holes Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCompatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard Speakon Cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom PA builds, rack panels, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size hole do I need to cut for these panel mount connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors require \"G\" size panel mounting holes, which is the industry standard for Speakon panel mounts. The exact diameter is 24mm (approximately 15\/16 inch). Most professional panel cutting tools include this size, and chassis punch sets specifically designed for audio connectors will have the correct \"G\" size punch.\u003c\/p\u003e\n\u003ch3\u003eCan these handle bi-amp and tri-amp speaker configurations?\u003c\/h3\u003e\n\u003cp\u003eYes, the 8-pole design supports complex multi-amp configurations where different amplifier channels drive individual drivers like woofers, mids, and tweeters separately. This makes them ideal for line array systems, high-end PA builds, and any application where you need to split amplifier signals to multiple drivers within the same cabinet.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between 4-pole and 8-pole Speakon connectors?\u003c\/h3\u003e\n\u003cp\u003e4-pole Speakon connectors handle standard stereo or bi-amp configurations (two channels, positive and negative for each). 8-pole connectors add four more connections, allowing for tri-amp setups or additional control signals. If you're running simple full-range speakers, 4-pole is sufficient, but for advanced multi-way systems or future expansion, 8-pole provides more flexibility.\u003c\/p\u003e\n\u003ch3\u003eDo these work with all standard Speakon cables?\u003c\/h3\u003e\n\u003cp\u003eThese panel connectors accept any standard Speakon cable plug, regardless of whether the cable itself is 2, 4, or 8 conductor. The connector will simply use the conductors that are present in your specific cable. This backward compatibility means you can use existing 4-pole cables while having the option to upgrade to 8-conductor cables later.\u003c\/p\u003e\n\u003ch3\u003eAre these suitable for permanent venue installations?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. Panel mount connectors are specifically designed for permanent installations where cables need to connect and disconnect frequently without wearing out the mounting point. They're commonly used in churches, theaters, and venues where house PA systems connect to mixing positions or where guest performers plug into the house system.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411359752,"sku":"SAPT10 - 2 Pack","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt10_2pk_1000_b0ecf1e6-5525-4fdf-b4b6-7351814743db.jpg?v=1765914469"},{"product_id":"connector-xlr-female-3-pin","title":"SAPT12F - 3 Pin XLR Female Connector","description":"\u003cp\u003eThe SAPT12F 3-pin XLR female connector is built for musicians, sound engineers, and venue techs who need reliable cable repairs and custom audio connections. Whether you're fixing a damaged mic cable backstage or building custom interconnects for your PA rack, this nickel-plated connector delivers the durability pros expect.\u003c\/p\u003e\n\u003cp\u003eThis female XLR connector accepts standard 3-pin male XLR plugs, providing secure locking connections for microphones, monitor sends, and balanced line signals. The nickel-plated contacts resist corrosion and ensure solid electrical contact, while the robust design handles the physical demands of live sound applications.\u003c\/p\u003e\n\u003cp\u003eThe black thermoplastic hood provides excellent strain relief with its integrated rubber grommet, protecting cable connections from pullout and vibration damage. The nickel plating on all three pins maintains signal integrity over thousands of connection cycles, making this connector suitable for touring rigs and permanent installations alike.\u003c\/p\u003e\n\u003cp\u003eUse the SAPT12F for microphone cable repairs, custom snake assemblies, or when you need to add female XLR connections to equipment racks. It's also ideal for building monitor feeds, effects loops, and balanced interconnects in recording studios and live sound systems. The locking design prevents accidental disconnection during performances.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills to attach your cable conductors to the three solder terminals. The connector comes ready to assemble with all necessary hardware included.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs the SAPT12F with a one-year warranty. Professional-grade construction at a price point that makes sense for stocking spare connectors in your road case.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT12F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pin XLR female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInstallation Method\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, touring rigs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cables can I use this XLR female connector with?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT12F works with any balanced audio cable using standard twisted pair construction. Use it with microphone cable, balanced line cable, or digital AES\/EBU cable. The connector accepts cable outer diameters that fit through the rubber grommet strain relief, typically accommodating cables from 4mm to 8mm outer diameter.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for both microphone and line level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT12F handles both microphone and line level balanced audio signals. The nickel-plated contacts and robust construction work equally well for dynamic microphones, condenser mics with phantom power, and balanced line outputs from mixers, preamps, and audio interfaces. The connector is rated for standard +48V phantom power applications.\u003c\/p\u003e\n\u003ch3\u003eHow difficult is it to solder this connector?\u003c\/h3\u003e\n\u003cp\u003eAssembly requires basic soldering skills and a standard soldering iron. The three solder terminals are clearly marked for hot (pin 2), cold (pin 3), and ground (pin 1) connections. Allow 10-15 minutes per connector if you're experienced with audio cable soldering. The terminals provide good heat dissipation and accept standard 60\/40 rosin-core solder.\u003c\/p\u003e\n\u003ch3\u003eWill this connector work with my existing XLR cables and equipment?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT12F uses standard 3-pin XLR dimensions and will mate with any male XLR connector following the AES standard. It's compatible with microphones, mixing consoles, amplifiers, and audio interfaces from all major manufacturers. The locking mechanism provides the same secure connection as factory-installed connectors.\u003c\/p\u003e\n\u003ch3\u003eHow many connection cycles can this connector handle before wearing out?\u003c\/h3\u003e\n\u003cp\u003eThe nickel-plated contacts and robust housing design handle thousands of connection cycles in normal use. The locking mechanism maintains secure connections even after extensive plugging and unplugging, making this connector suitable for touring applications where cables are connected and disconnected frequently. Proper strain relief installation extends the connector's operational life significantly.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411368776,"sku":"SAPT12F","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt12f_1000_e4d92426-9b61-4516-b302-81f38ceb85a9.jpg?v=1765914446"},{"product_id":"connector-xlr-male-3-pin","title":"SAPT12M - 3 Pin XLR Male Connector","description":"\u003cp\u003eThe SAPT12M is a professional-grade 3-pin XLR male connector designed for musicians, DJs, sound engineers, and venue techs who need reliable audio connections. This nickel-plated connector handles the demanding requirements of live sound applications where signal integrity matters.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable nickel construction and 3-pin configuration, this XLR male connector provides secure, balanced audio connections for microphones, mixers, amplifiers, and powered speakers. The nickel plating resists corrosion and ensures consistent signal transfer over time.\u003c\/p\u003e\n\u003cp\u003eThe black protective hood features a rubber grommet that provides strain relief for attached cables while maintaining a professional appearance. The robust construction handles the constant plugging and unplugging that comes with live performances, rehearsals, and mobile DJ setups.\u003c\/p\u003e\n\u003cp\u003eUse this connector for cable repairs, custom cable builds, or converting existing cables to XLR male termination. Essential for church sound systems, band rehearsal spaces, recording studios, and mobile performance rigs where standard XLR male connections are required.\u003c\/p\u003e\n\u003cp\u003eSimply solder your audio cable leads to the appropriate pins and secure with the included strain relief. Compatible with all standard XLR female inputs on mixing consoles, audio interfaces, and powered speakers.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this connector with a one-year warranty against manufacturing defects. Professional-grade construction at a practical price point for working audio professionals.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT12M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHood Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, XLR termination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cables can I use this XLR male connector with?\u003c\/h3\u003e\n\u003cp\u003eThis connector works with standard balanced audio cables using 20-24 AWG wire. You'll need to solder the positive, negative, and ground leads to pins 2, 3, and 1 respectively. The rubber grommet accommodates cable diameters typically found in microphone and line-level audio cables.\u003c\/p\u003e\n\u003ch3\u003eHow do I wire this XLR male connector properly?\u003c\/h3\u003e\n\u003cp\u003eFollow standard XLR wiring: Pin 1 connects to shield\/ground, Pin 2 connects to positive\/hot signal, and Pin 3 connects to negative\/cold signal. This ensures compatibility with all professional audio equipment and maintains proper balanced signal flow.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for both microphone and line level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, XLR connectors handle both microphone and line level signals. The connector itself doesn't affect signal level – that's determined by your source equipment and the receiving input. This connector works equally well for dynamic microphones, condenser mics, or line outputs from mixers and audio interfaces.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between this and XLR female connectors?\u003c\/h3\u003e\n\u003cp\u003eXLR male connectors have protruding pins and plug into XLR female inputs on equipment. Males are typically used on cable ends that connect to mixers, interfaces, or speakers. XLR females have receptacles and are used on source ends like microphones or as outputs from equipment.\u003c\/p\u003e\n\u003ch3\u003eDo I need any special tools to install this connector?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a soldering iron, solder, wire strippers, and a small screwdriver. The connector disassembles for easy access to solder points. Make sure to slide the hood and strain relief onto your cable before soldering, then reassemble after making connections.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411368904,"sku":"SAPT12M","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt12m_1000_4c44aa06-152a-4f1f-8b55-fea4e19ae568.jpg?v=1765914445"},{"product_id":"connectors-xlr-3-pin","title":"SAPT12MF (8 Pack) - Four XLR Male\/Four XLR Female","description":"\u003cp\u003eProfessional XLR connector pack designed for musicians, sound engineers, and venue technicians who need reliable backup connectors for cable repairs and custom builds. When a connector fails mid-show or you need to modify existing cables, having quality spares saves the gig.\u003c\/p\u003e\n\u003cp\u003eThis 8-piece connector set includes four XLR male and four XLR female 3-pin connectors, providing the flexibility to repair damaged cables or create custom audio runs. The nickel-plated contacts ensure solid electrical connection while resisting corrosion over time.\u003c\/p\u003e\n\u003cp\u003eEach connector features black ABS housing with integrated rubber strain relief grommets that protect cables from pulling and flexing damage. The standard 3-pin configuration handles balanced microphone and line-level signals, making these connectors compatible with virtually all professional audio equipment. Solder cup terminals accommodate 20-24 AWG wire for secure, permanent connections.\u003c\/p\u003e\n\u003cp\u003eEssential for live sound setups, recording studios, and mobile DJ rigs where cable reliability matters. Keep these in your repair kit for emergency fixes during events, or use them to build custom-length cables for permanent installations in churches, schools, and performance venues.\u003c\/p\u003e\n\u003cp\u003eEach connector requires basic soldering to attach audio cable - simply strip the cable, tin the wires, and solder to the numbered terminals inside each connector. Package includes four male XLR connectors and four female XLR connectors.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty against manufacturing defects. Professional-grade reliability at a practical price point for working audio professionals.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT12MF (8 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pin XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackage Contents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e4 XLR Male, 4 XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTerminal Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20-24 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, backup connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauge should I use with these XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors accommodate 20-24 AWG wire, which covers standard microphone cable and most professional audio cable. Use 22 AWG for typical mic cables and 20 AWG for longer runs or high-current applications like phantom power.\u003c\/p\u003e\n\u003ch3\u003eCan I use these connectors for both microphone and line level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, these 3-pin XLR connectors handle both microphone and line level balanced audio signals. They work with dynamic mics, condenser mics, direct boxes, preamp outputs, and any professional audio equipment using standard XLR connections.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors require soldering or are they tool-free?\u003c\/h3\u003e\n\u003cp\u003eThese are solder-cup connectors that require basic soldering skills. Strip your cable, tin the wires, and solder to the numbered terminals inside each connector. This creates a permanent, reliable connection that won't fail under stage conditions.\u003c\/p\u003e\n\u003ch3\u003eHow many backup connectors should I keep for live sound work?\u003c\/h3\u003e\n\u003cp\u003eMost sound engineers keep 4-6 male and female connectors in their repair kit for emergency cable fixes. This 8-pack provides enough spares for multiple repairs plus some extras for building custom cables when needed.\u003c\/p\u003e\n\u003ch3\u003eAre these connectors compatible with Neutrik and other professional brands?\u003c\/h3\u003e\n\u003cp\u003eYes, these follow standard 3-pin XLR dimensions and wiring conventions, so they mate properly with Neutrik, Switchcraft, and other professional XLR connectors. The nickel-plated contacts provide reliable connection with any quality XLR jack.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369032,"sku":"SAPT12MF-8Pack-4Each","price":25.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPTMF_8pk_1000_aee79f56-dffa-49ab-83c8-3de34a9d5e36.jpg?v=1765914444"},{"product_id":"connector-xlr-female-4-pin","title":"SAPT13 - 4 Pin Mini XLR Female Connector","description":"\u003cp\u003eThe SAPT13 4-pin mini XLR female connector is an essential spare part for sound engineers and mobile performers who need reliable connections in their signal chain. This professional-grade connector handles the 4-pin XLR connections common in powered speakers, mixing consoles, and specialty audio equipment.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable black hood and rubber grommet, this connector provides secure strain relief and weather protection for outdoor gigs and permanent installations. The 4-pin configuration supports both audio signal and power in applications like intercom systems, powered monitor feeds, and some digital audio protocols.\u003c\/p\u003e\n\u003cp\u003eSound professionals rely on quality connectors because a single failed connection can shut down a show. The SAPT13 uses solid metal pins and robust housing construction that withstands repeated plugging and unplugging. The rubber grommet creates a tight seal around the cable jacket, preventing moisture intrusion and cable pullout.\u003c\/p\u003e\n\u003cp\u003eMobile DJs carrying backup connectors can quickly repair damaged cables on-site instead of losing a gig. Church sound teams appreciate having spare connectors for their permanent installations, while live sound companies stock these for emergency repairs during load-in. Recording studios use them for custom cable builds and patch bay connections.\u003c\/p\u003e\n\u003cp\u003eThe connector accepts standard 4-conductor cable and requires basic soldering skills for assembly. Professional audio cables typically use 22-24 AWG wire for signal connections.\u003c\/p\u003e\n\u003cp\u003eEvery SAPT13 connector includes Seismic Audio's one-year warranty and ships quickly from our warehouse. Professional-grade components at prices that make sense for working musicians and sound professionals.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel Number\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e4-Pin XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber Grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e4-Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, spare parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cables work with the SAPT13 4-pin XLR connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT13 accepts standard 4-conductor audio cable, typically 22-24 AWG wire gauge. You'll need cables with four internal conductors plus shield for proper 4-pin XLR wiring. Most professional audio supply companies carry compatible cable, or you can salvage conductors from damaged 4-pin XLR cables.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to assemble this connector?\u003c\/h3\u003e\n\u003cp\u003eYes, you'll need a soldering iron, solder, wire strippers, and basic hand tools. The connector requires soldering each of the four pins plus the shield connection to the housing. If you're not comfortable with soldering, most music stores and audio repair shops can assemble custom cables using your connectors.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between 3-pin and 4-pin XLR connectors?\u003c\/h3\u003e\n\u003cp\u003e4-pin XLR connectors carry an additional conductor compared to standard 3-pin audio XLR. While 3-pin handles balanced audio signals (hot, cold, shield), 4-pin configurations support specialized applications like intercom systems, some powered speakers, or digital audio protocols that require the extra conductor for power or data.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for microphone cables?\u003c\/h3\u003e\n\u003cp\u003eNo, standard microphones use 3-pin XLR connections, not 4-pin. The SAPT13 is designed for equipment that specifically requires 4-pin XLR connections. Using it for microphone applications would leave one pin unused and potentially create compatibility issues with your mixing console or audio interface.\u003c\/p\u003e\n\u003ch3\u003eHow many connectors should I keep as spares?\u003c\/h3\u003e\n\u003cp\u003eMost mobile sound companies keep 2-4 spare XLR connectors of each type they commonly use. For permanent installations like churches or venues, having 1-2 spares per connector type prevents service interruptions. The low cost of the SAPT13 makes it practical to stock extras rather than risk downtime during critical events.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369096,"sku":"SAPT13","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt13_1000_60a89958-05d2-4916-a101-4cc5a4032257.jpg?v=1765914444"},{"product_id":"connectors-xlr-female-4-pin","title":"SAPT13 (10 Pack) - 4 Pin Mini XLR Female Connectors","description":"\u003cp\u003eProfessional audio engineers, lighting technicians, and stage crews need reliable 4-pin XLR connectors for power distribution, DMX lighting control, and intercom systems. The SAPT13 10-pack delivers field-ready female connectors that handle the demanding requirements of live production environments.\u003c\/p\u003e\n\u003cp\u003eThese 4-pin XLR female connectors provide secure, locking connections for power and signal applications where standard 3-pin XLR won't work. The 4-pin configuration supports balanced audio plus phantom power, DMX512 lighting protocols, or dedicated power distribution in professional installations.\u003c\/p\u003e\n\u003cp\u003eEach connector features a durable black metal housing with integrated strain relief and rubber grommet protection. The precision-machined contact pins ensure reliable signal transfer and resist corrosion from repeated connections. Gold-plated contacts maintain consistent performance across hundreds of connection cycles, while the robust shell construction withstands the physical demands of touring and installation work.\u003c\/p\u003e\n\u003cp\u003eUse these connectors for DMX lighting chains in theaters and concert venues, power distribution in broadcast studios, or custom cable assemblies for houses of worship and conference centers. They're equally valuable for repair work when existing connectors fail during critical productions. Mobile DJs and rental companies keep these on hand for quick field repairs and custom cable builds.\u003c\/p\u003e\n\u003cp\u003eSimply solder your cable conductors to the numbered terminals and secure with the integrated cable clamp. Each connector includes detailed wiring diagrams for common applications. The pack of ten ensures you have backup connectors for multiple projects or emergency repairs.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty against manufacturing defects. Professional-grade components at accessible pricing, with fast shipping to keep your productions running smoothly.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT13 (10 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e4 Pin XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Clamp\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIntegrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDMX lighting, power distribution, custom cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat applications use 4-pin XLR connectors instead of standard 3-pin?\u003c\/h3\u003e\n\u003cp\u003e4-pin XLR connectors serve three main applications: DMX512 lighting control (industry standard for intelligent lights and controllers), balanced audio with phantom power (microphones requiring both signal and power), and DC power distribution in professional audio\/video systems. The fourth pin provides the additional conductor needed for these specialized applications that standard 3-pin XLR cannot support.\u003c\/p\u003e\n\u003ch3\u003eCan I use these connectors for regular audio cables?\u003c\/h3\u003e\n\u003cp\u003eWhile 4-pin XLR connectors are physically compatible with 3-pin XLR, they're designed for specific applications requiring four conductors. Using them for standard balanced audio connections leaves the fourth pin unused and may cause confusion during system setup. For standard microphone and line-level audio, stick with 3-pin XLR connectors to maintain industry standards and avoid compatibility issues.\u003c\/p\u003e\n\u003ch3\u003eWhat wire gauge and cable types work with these connectors?\u003c\/h3\u003e\n\u003cp\u003eThese female XLR connectors accommodate standard audio and DMX cable gauges from 18 AWG to 24 AWG. For DMX applications, use certified DMX512 cable with 120-ohm impedance and twisted pair construction. For power applications, ensure your wire gauge matches the current requirements of your specific application. The integrated cable clamp securely holds cables with jacket diameters from 4mm to 8mm.\u003c\/p\u003e\n\u003ch3\u003eHow do I wire a 4-pin XLR connector for DMX lighting?\u003c\/h3\u003e\n\u003cp\u003eDMX512 wiring uses pins 1 and 2 for the data signal (pin 1 = Data-, pin 2 = Data+), pin 3 connects to shield\/ground, and pin 4 remains unused in most applications. Always consult your lighting controller and fixture manuals for specific wiring requirements, as some manufacturers use different pin configurations. Use certified DMX cable and maintain proper impedance matching with 120-ohm terminators at the end of your lighting chain.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors work for both male-to-female and panel mount applications?\u003c\/h3\u003e\n\u003cp\u003eThese are cable-mount female connectors designed to terminate the end of cables, not for panel mounting. They accept male XLR plugs and are typically used on the input side of devices or as cable terminations. For panel-mount applications, you need chassis-mount XLR connectors with threaded mounting hardware. These cable-mount versions are perfect for custom cable assembly, repairs, and field modifications.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369224,"sku":"SAPT13-10Pack","price":42.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt13_10pk_1000_6c491a6a-cd7d-4a6a-8aee-4c45fbc2a9d2.jpg?v=1765914443"},{"product_id":"connector-black-xlr-male-3-pin","title":"SAPT14 - Black XLR Male Connector","description":"\u003cp\u003eThe SAPT14 black XLR male connector serves musicians, sound engineers, and mobile DJs who need reliable field-repairable connections for their microphone and line-level signals. This professional 3-pin XLR connector handles the critical job of maintaining clean signal transmission in live sound applications.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable black metal housing and secure rubber cable grommet, the SAPT14 provides the mechanical strength needed for touring and regular transport. The 3-pin configuration follows standard balanced audio wiring, ensuring compatibility with professional microphones, DI boxes, and mixing consoles.\u003c\/p\u003e\n\u003cp\u003eThis connector features gold-plated contacts for corrosion resistance and optimal signal transfer, while the threaded locking mechanism provides secure connections that won't pull apart during performances. The black finish matches most professional audio gear, maintaining a clean stage appearance.\u003c\/p\u003e\n\u003cp\u003eEssential for cable repair, custom cable builds, and emergency fixes during gigs, this connector works in venues from intimate coffee shops to mid-sized concert halls. Sound technicians rely on quality connectors like the SAPT14 to maintain signal integrity whether running vocal mics, instrument DIs, or monitor feeds.\u003c\/p\u003e\n\u003cp\u003eThe connector accepts standard 20-24 AWG cable and includes all necessary internal hardware for a complete assembly. Professional solder connections ensure long-term reliability under the stress of regular use.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs the SAPT14 with a one-year warranty and fast shipping. When signal integrity matters, choose connectors built to professional standards at practical prices.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-Pin XLR Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGold-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Grommet\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber strain relief\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eThreaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCompatible Cable Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20-24 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBalanced audio signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, emergency fixes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cable gauge works with the SAPT14 XLR connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT14 accommodates standard 20-24 AWG audio cable, which covers most professional microphone and line-level applications. The rubber grommet provides strain relief for cables in this range, ensuring secure connections that won't pull apart during transport or performance.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector to repair damaged microphone cables?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT14 is ideal for repairing damaged XLR cables in the field. You'll need basic soldering skills to attach the cable conductors to the connector's terminals - pin 1 for ground\/shield, pin 2 for positive, and pin 3 for negative in standard balanced wiring configurations.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to plastic XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT14's metal housing provides superior durability compared to plastic alternatives, especially important for touring applications where connectors experience regular handling and transport stress. The threaded locking mechanism also offers more secure connections than basic plastic latches.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between male and female XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eXLR male connectors like the SAPT14 feature protruding pins and typically terminate the source end of cables - such as microphone outputs or mixer sends. Female connectors have recessed sockets and usually terminate the destination end, like mixer inputs or powered speaker inputs.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to assemble this connector?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a soldering iron, solder, wire strippers, and a small screwdriver to properly assemble the SAPT14. The connector includes all internal hardware, but professional assembly requires basic electronics skills to ensure proper signal wiring and strain relief installation.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369288,"sku":"SAPT14","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt14_1000_5fdca4b4-9a0e-4e3b-8856-67464d38b523.jpg?v=1765914442"},{"product_id":"set-of-ten-black-chrome-24k-banana-connectors-1","title":"24k Banana Connectors\/Clips - Pack of 10 (5 Red\/5 Black)","description":"\u003cp\u003eProfessional banana connectors designed for musicians, DJs, and sound engineers who need reliable connections between amplifiers and speakers. The SAPT141 delivers secure, corrosion-resistant terminations that maintain signal integrity in live sound applications.\u003c\/p\u003e\n\u003cp\u003eThese 24K gold-plated banana plugs provide superior conductivity and long-term durability compared to standard brass connectors. The heavy-duty construction ensures tight connections that won't loosen during transport or extended use, eliminating crackling and signal loss that can plague cheaper alternatives.\u003c\/p\u003e\n\u003cp\u003eCompatible with 12 to 18 AWG speaker wire, these connectors handle the full current range needed for professional PA systems and studio monitors. The gold plating resists oxidation and corrosion, maintaining low resistance connections that preserve your amplifier's power delivery. Each connector features a robust spring-loaded design that grips binding posts securely without damaging the terminal.\u003c\/p\u003e\n\u003cp\u003ePerfect for touring bands setting up PA systems nightly, churches running permanent sound installations, and DJs who need quick speaker connections at multiple venues. The color-coded design (5 red positive, 5 black negative) prevents wiring errors during setup, especially valuable in dimly lit venues or rushed load-ins.\u003c\/p\u003e\n\u003cp\u003eSimply strip your speaker wire, insert into the connector, and tighten the screw terminal for a gas-tight connection. No soldering required, making field repairs and reconfigurations straightforward.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with reliable performance you can count on, shipped ready to upgrade your speaker connections immediately.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT141\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10 pack (5 red, 5 black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Compatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e12 to 18 AWG speaker wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e24K gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBanana plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInstallation\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eScrew terminal, no soldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePolarity Coding\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed (positive), Black (negative)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eProfessional PA systems, studio monitors, amplifier connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat gauge speaker wire do these banana connectors accept?\u003c\/h3\u003e\n\u003cp\u003eThese connectors work with 12 to 18 AWG speaker wire, covering the standard range used in professional audio applications. The 12 AWG capacity handles high-power amplifiers and long cable runs, while the 18 AWG compatibility works with smaller studio monitors and nearfield speakers.\u003c\/p\u003e\n\u003ch3\u003eDo I need to solder these banana plugs to my speaker wire?\u003c\/h3\u003e\n\u003cp\u003eNo soldering required. These connectors use a screw terminal design where you strip the wire, insert it into the connector, and tighten the screw for a secure connection. This makes field repairs and reconfigurations much easier than soldered connections.\u003c\/p\u003e\n\u003ch3\u003eWhy choose gold-plated connectors over standard brass ones?\u003c\/h3\u003e\n\u003cp\u003eThe 24K gold plating resists corrosion and oxidation that can increase resistance over time with brass connectors. This maintains consistent signal transfer and prevents the crackling or signal loss that develops as cheaper connectors degrade, especially in humid environments or outdoor applications.\u003c\/p\u003e\n\u003ch3\u003eHow do these connectors improve my amplifier-to-speaker connection?\u003c\/h3\u003e\n\u003cp\u003eBanana plugs eliminate the need to twist bare wire around binding posts, which can loosen over time and create poor connections. The spring-loaded design maintains constant pressure against the amplifier or speaker terminal, ensuring reliable power transfer and preventing intermittent connections during transport.\u003c\/p\u003e\n\u003ch3\u003eCan these handle the power from my 1000-watt amplifier?\u003c\/h3\u003e\n\u003cp\u003eYes, these heavy-duty connectors are designed for professional applications and can handle the current from high-power amplifiers when used with appropriate gauge speaker wire. The gold plating and robust construction maintain low resistance connections that won't become a bottleneck in your signal chain.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369416,"sku":"SAPT141","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt-141-142-500-3_f8b91d24-5673-4f8a-acd1-a77954987ec6.jpg?v=1765914441"},{"product_id":"set-of-ten-black-red-chrome-24k-banana-connectors","title":"24k Banana Connectors\/Clips - Black Chrome Finish - Pack of 10 (5 Red\/5 Black)","description":"\u003cp\u003eProfessional banana plug connectors designed for musicians, DJs, and audio engineers who need reliable speaker wire connections for live sound setups. These heavy-duty connectors eliminate the guesswork and potential connection failures that come with bare wire hookups to amplifiers and PA speakers.\u003c\/p\u003e\n\u003cp\u003eEach connector features 24K gold plating on the metal contact points, providing corrosion resistance and maintaining signal integrity over time. The sleek black chrome finish offers a professional appearance that matches modern rack gear and amplifier aesthetics.\u003c\/p\u003e\n\u003cp\u003eThese connectors accommodate speaker wire from 10 to 18 AWG, covering the standard wire gauges used in most PA systems and live sound applications. The spring-loaded design creates secure contact with banana jack inputs found on power amplifiers, powered mixers, and some active speakers. Installation requires no soldering — simply strip your wire, insert it into the connector, and tighten the strain relief.\u003c\/p\u003e\n\u003cp\u003ePerfect for connecting passive PA speakers to power amplifiers, setting up monitor systems, or creating custom speaker cable lengths for touring rigs. The color-coded design (5 red, 5 black) helps maintain proper polarity when wiring multiple speakers or running parallel connections.\u003c\/p\u003e\n\u003cp\u003eEach 10-pack includes 5 red and 5 black connectors, enough to terminate both ends of 5 speaker cables or handle a complete stereo PA setup. Seismic Audio backs these connectors with reliable construction and fast shipping to keep your sound system running smoothly.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10-pack (5 red, 5 black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Compatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10-18 AWG speaker wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e24K gold-plated contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy-duty banana clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInstallation\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNo soldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor Coding\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed\/black for polarity identification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePA speakers, amplifier connections, monitor systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat speaker wire gauges work with these banana plugs?\u003c\/h3\u003e\n\u003cp\u003eThese connectors accommodate speaker wire from 10 AWG to 18 AWG, which covers the standard wire sizes used in most PA and live sound applications. The larger 10-12 AWG wires are typically used for high-power applications or longer cable runs, while 14-18 AWG works well for most club and venue setups.\u003c\/p\u003e\n\u003ch3\u003eDo I need to solder these banana plug connectors?\u003c\/h3\u003e\n\u003cp\u003eNo soldering is required. These are screw-type banana plugs where you strip about 1\/2 inch of insulation from your speaker wire, insert the bare wire into the connector, and tighten the strain relief collar to secure the connection. This makes them ideal for field repairs and quick cable assembly.\u003c\/p\u003e\n\u003ch3\u003eHow many speaker cables can I make with one 10-pack?\u003c\/h3\u003e\n\u003cp\u003eOne 10-pack provides enough connectors to terminate 5 complete speaker cables, since each cable needs two connectors (one for each end). The red and black color coding helps you maintain proper polarity when connecting speakers to amplifiers or powered mixers.\u003c\/p\u003e\n\u003ch3\u003eWill these work with my power amplifier's banana jack inputs?\u003c\/h3\u003e\n\u003cp\u003eYes, these standard banana plugs are compatible with banana jack inputs found on most power amplifiers, powered mixers, and some active PA speakers. They provide a more secure and professional connection than bare wire twisted into binding posts.\u003c\/p\u003e\n\u003ch3\u003eWhy choose banana plugs over bare wire connections?\u003c\/h3\u003e\n\u003cp\u003eBanana plugs eliminate the risk of wire strands touching and causing short circuits, provide consistent contact pressure for better signal transfer, and make it much faster to connect and disconnect speakers during setup and teardown. The gold plating also prevents corrosion that can degrade bare wire connections over time.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369480,"sku":"SAPT142","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt142_5pk_500_b45e1bb2-b16a-422c-9d5d-00cf68ad3e84.jpg?v=1765914439"},{"product_id":"set-of-twenty-black-red-24k-banana-connectors","title":"24k Banana Connectors\/Clips - Black Chrome Finish - Pack of 20 (10 Red\/10 Black)","description":"\u003cp\u003eThese 24K gold-plated banana connectors deliver secure, reliable connections for home hi-fi systems, studio monitors, and PA speaker setups where clean signal transfer matters. The black chrome finish provides professional aesthetics while the gold plating ensures corrosion-free performance over years of use.\u003c\/p\u003e\n\u003cp\u003eEach connector accommodates 10 to 18 AWG speaker wire, making them compatible with most standard speaker cables used in home and professional audio applications. The heavy-duty construction locks firmly into banana jack inputs without slipping or loosening during transport or regular use.\u003c\/p\u003e\n\u003cp\u003eThe 24K gold plating on the contact surfaces prevents oxidation and maintains consistent conductivity, while the sleek black chrome body resists fingerprints and scratches. These connectors work with amplifiers, receivers, powered speakers, and passive monitors that feature standard banana jack inputs.\u003c\/p\u003e\n\u003cp\u003eUse these for connecting bookshelf speakers in studios, hooking up stage monitors for bands, or wiring distributed speaker systems in small venues up to 150 people. The color-coded design (10 red, 10 black) simplifies polarity identification during installation and troubleshooting.\u003c\/p\u003e\n\u003cp\u003eSimply strip your speaker wire, insert into the connector's wire clamp, and plug into any standard banana jack input. The spring-loaded design ensures solid contact while allowing for easy removal when reconfiguring your system.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with reliable construction designed for professional use. Ships fast so you can complete your wiring project without delay.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT142-20Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20 connectors (10 red, 10 black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e24K gold-plated contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack chrome body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Compatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10 to 18 AWG speaker wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBanana plug\/clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStudio monitors, PA speakers, home hi-fi systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauge do these banana connectors accept?\u003c\/h3\u003e\n\u003cp\u003eThese connectors work with 10 to 18 AWG speaker wire, which covers the most common wire sizes used in home and professional audio systems. This range includes standard 12 AWG and 14 AWG speaker cables found in most PA setups and home stereo systems.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors work with all amplifiers and speakers?\u003c\/h3\u003e\n\u003cp\u003eThese banana plugs connect to any amplifier, receiver, or powered speaker with standard banana jack inputs. Most pro audio gear, home receivers, and studio monitors feature these universal connections. Check your equipment's rear panel for circular banana jack inputs before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow many speakers can I connect with this 20-pack?\u003c\/h3\u003e\n\u003cp\u003eThis pack provides enough connectors for 5 complete stereo pairs (10 speakers total) since each speaker requires 2 connectors for positive and negative connections. For mono PA speakers or subwoofers, you can connect up to 10 individual speakers.\u003c\/p\u003e\n\u003ch3\u003eWhy choose gold-plated connectors over standard ones?\u003c\/h3\u003e\n\u003cp\u003eThe 24K gold plating prevents corrosion and oxidation that can degrade audio quality over time, especially in humid environments or outdoor applications. Gold maintains consistent conductivity and won't tarnish, ensuring your connections perform reliably for years without cleaning or maintenance.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and bare wire connections?\u003c\/h3\u003e\n\u003cp\u003eBanana connectors provide more secure, professional connections than bare wire twisted into binding posts. They eliminate the risk of stray wire strands causing shorts, make system changes faster, and maintain consistent contact pressure for better signal transfer and reduced resistance.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411369544,"sku":"SAPT142-20Pack","price":51.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt142_10pk_500_233b3461-aed5-40df-aae6-5bc3a59c3d30.jpg?v=1765914439"},{"product_id":"4-pack-3-pin-xlr-male-connectors","title":"SAPT14 (4 Pack) - Black XLR Male Connector","description":"\u003cp\u003eProfessional XLR male connectors designed for musicians, DJs, and audio engineers who need reliable backup connectors or want to repair existing microphone and line cables. These black 3-pin XLR connectors handle the connection demands of live sound applications where signal integrity matters.\u003c\/p\u003e\n\u003cp\u003eEach connector features a durable black hood with integrated rubber grommet that provides strain relief and protects against cable damage during transport and setup. The 3-pin configuration supports balanced audio signals, essential for maintaining clean signal transmission in longer cable runs and electrically noisy environments.\u003c\/p\u003e\n\u003cp\u003eBuilt for field repairs and custom cable assembly, these connectors use standard XLR pinout and wiring configuration that works with all professional microphones, mixing consoles, and powered speakers. The solid metal construction and secure locking mechanism ensure connections stay tight during performances, while the black finish matches most professional audio gear.\u003c\/p\u003e\n\u003cp\u003ePerfect for building custom microphone cables, repairing damaged connectors on existing cables, or keeping as emergency spares in your gig bag. Whether you're running sound for a small venue, building a home studio, or maintaining equipment for a touring act, having quality replacement connectors prevents show-stopping failures.\u003c\/p\u003e\n\u003cp\u003eEach 4-pack includes everything needed for two complete cable repairs or custom cable builds. Standard soldering required for installation. Backed by Seismic Audio's one-year warranty and fast shipping to keep your sound system operational.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pin XLR Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHood Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack with rubber grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard XLR (1=Ground, 2=Hot, 3=Cold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard XLR twist-lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e4 connectors per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInstallation Method\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder connection required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, emergency spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cables can I repair with these XLR male connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors work with any microphone cable or line cable that uses 3-pin XLR male connections. Most commonly used to repair vocal microphone cables, instrument cables with XLR outputs, and balanced line cables connecting mixing consoles to powered speakers. Standard soldering skills required for installation.\u003c\/p\u003e\n\u003ch3\u003eHow many cable repairs can I make with one 4-pack?\u003c\/h3\u003e\n\u003cp\u003eEach connector repairs one end of a cable, so this 4-pack handles four cable ends total. If you're repairing complete cables (both ends damaged), you'll get two full cable repairs per pack. For building new cables from scratch, you'll need both male and female connectors.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors work with all microphone brands?\u003c\/h3\u003e\n\u003cp\u003eYes, these use the universal 3-pin XLR standard that works with Shure, Audio-Technica, Sennheiser, and all other professional microphone brands. The pin configuration follows industry standard: Pin 1 (ground\/shield), Pin 2 (hot\/positive), Pin 3 (cold\/negative). Compatible with both dynamic and condenser microphones.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between XLR male and female connectors?\u003c\/h3\u003e\n\u003cp\u003eXLR male connectors have protruding pins and connect to microphones, while XLR female connectors have receptacles and connect to mixing consoles or speakers. Male connectors are what you'll find on the microphone end of most mic cables, making these perfect for repairing damaged mic cable ends.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for DMX lighting cables?\u003c\/h3\u003e\n\u003cp\u003eWhile these connectors will physically fit DMX applications, they're designed for audio use. DMX cables require 120-ohm impedance rating for proper signal transmission, while audio XLR cables typically use 75-ohm cable. For lighting applications, use connectors specifically rated for DMX512 protocol to avoid signal issues.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411370120,"sku":"SAPT14-4Pack","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt14_4pk_1000_176436fe-5cc4-4537-82c7-2b3548c5d2cd.jpg?v=1765914432"},{"product_id":"8-pack-3-pin-xlr-male-connectors","title":"SAPT14 (8 Pack) - Black XLR Male Connector","description":"\u003cp\u003eThese black 3-pin XLR male connectors are essential for sound engineers, band members, and venue techs who need reliable audio connections for microphones, mixers, and PA systems. Whether you're building custom cables or making emergency repairs during a gig, having quality connectors on hand keeps your live sound setup running smoothly.\u003c\/p\u003e\n\u003cp\u003eEach SAPT14 connector features a robust 3-pin XLR male configuration that locks securely into female XLR jacks on microphones, mixing consoles, and audio interfaces. The black metal housing with rubber strain relief grommet protects against cable pull and stage wear, ensuring consistent signal transfer show after show.\u003c\/p\u003e\n\u003cp\u003eThe connectors use standard XLR pinout (Pin 1: Ground, Pin 2: Hot+, Pin 3: Cold-) and are compatible with all professional audio equipment using balanced XLR connections. Gold-plated contacts resist corrosion and maintain clean signal paths, while the spring-loaded locking mechanism provides secure connections that won't come loose during performances.\u003c\/p\u003e\n\u003cp\u003ePerfect for building custom microphone cables, extending existing XLR runs, or keeping spares in your road case for emergency repairs. Sound companies use these for everything from church sound systems to outdoor festival rigs where reliability matters. The 8-pack quantity gives you enough connectors to handle multiple cable builds or stock your repair kit.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills and standard audio cable. Each pack includes eight male XLR connectors with protective hoods and strain relief grommets.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships them ready for immediate use in your next audio project.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT14 (8 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pin XLR Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin 1: Ground, Pin 2: Hot+, Pin 3: Cold-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGold-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber grommet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSpring-loaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e8 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom cable builds, repairs, spare inventory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cables can I build with these XLR male connectors?\u003c\/h3\u003e\n\u003cp\u003eThese male XLR connectors are perfect for building microphone cables, mixer-to-amplifier runs, and balanced audio patch cables. Pair them with female XLR connectors and quality microphone cable to create custom lengths for your specific setup. They work with any standard balanced audio cable for professional applications.\u003c\/p\u003e\n\u003ch3\u003eDo I need soldering experience to use these connectors?\u003c\/h3\u003e\n\u003cp\u003eYes, these connectors require basic soldering skills to attach to audio cable. You'll need to solder the cable's conductors to the connector's three pins following standard XLR wiring practices. If you're not comfortable soldering, consider having a local audio shop or electronics technician install them for you.\u003c\/p\u003e\n\u003ch3\u003eAre these connectors compatible with all XLR equipment?\u003c\/h3\u003e\n\u003cp\u003eThese standard 3-pin XLR male connectors work with any female XLR jack on microphones, mixing consoles, audio interfaces, and PA systems. They follow industry-standard XLR pinout and dimensions, ensuring compatibility with equipment from all major pro audio manufacturers including Shure, Behringer, Mackie, and others.\u003c\/p\u003e\n\u003ch3\u003eHow many connectors do I need for a typical sound setup?\u003c\/h3\u003e\n\u003cp\u003eFor a basic band setup with 4-6 microphones, you'd typically need 4-6 male connectors (one per mic cable). Churches and venues often keep 8-12 spare connectors for repairs and custom cable runs. This 8-pack provides enough connectors for most small to medium sound systems or gives you a good stock of spares.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and cheaper plastic XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eThese metal-bodied connectors with gold-plated contacts offer better durability and signal integrity than plastic alternatives. The spring-loaded locking mechanism provides more secure connections, while the rubber strain relief prevents cable damage from repeated plugging and unplugging. They're built for professional use where reliability matters most.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411370376,"sku":"SAPT14-8Pack","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt14_8pk_1000_cc4d8798-0ce8-4dc4-acf0-07128877d311.jpg?v=1765914430"},{"product_id":"connector-mini-xlr-female-3-pin","title":"SAPT15 - Mini XLR Female Connector","description":"\u003cp\u003eThe SAPT15 Mini XLR Female Connector is built for sound engineers, touring musicians, and live sound professionals who need reliable connections for wireless microphones, in-ear monitors, and compact audio equipment. This 3-pin mini XLR female connector handles the specialized connection requirements that standard XLR connectors can't accommodate.\u003c\/p\u003e\n\u003cp\u003eThis connector provides secure signal transmission for professional audio applications where space is limited and connection integrity is critical. The mini XLR format is the industry standard for wireless bodypack transmitters, in-ear monitor receivers, and other compact pro audio gear.\u003c\/p\u003e\n\u003cp\u003eThe connector features a durable black housing with integrated rubber grommet for strain relief and moisture protection. The 3-pin configuration supports balanced audio signals, reducing noise and interference in demanding live sound environments. Quality solder connections and robust metal contacts ensure reliable performance show after show.\u003c\/p\u003e\n\u003cp\u003eUse this connector for repairing wireless microphone cables, building custom in-ear monitor cables, or creating adapters for mixing console connections. It's essential for houses of worship running wireless systems, mobile DJs with bodypack transmitters, and bands using in-ear monitors on stage.\u003c\/p\u003e\n\u003cp\u003eThe connector requires basic soldering skills for installation and works with standard audio cable. Each unit includes the female connector body with strain relief grommet.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs the SAPT15 with a one-year warranty and ships quickly to keep your audio setup running without delay.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMini XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber grommet included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInstallation Method\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSignal Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBalanced audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWireless mics, in-ear monitors, compact audio gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat audio equipment uses mini XLR female connectors?\u003c\/h3\u003e\n\u003cp\u003eMini XLR female connectors are primarily used with wireless microphone bodypack transmitters, in-ear monitor receivers, and some compact recording equipment. They're the standard connection for most professional wireless systems from manufacturers like Shure, Sennheiser, and Audio-Technica. This connector type is smaller than standard XLR but maintains the same 3-pin balanced signal configuration.\u003c\/p\u003e\n\u003ch3\u003eDo I need soldering experience to use this connector?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT15 requires basic soldering skills to attach audio cable conductors to the internal terminals. You'll need to strip the cable, tin the wires, and solder them to the appropriate pins while ensuring proper strain relief through the rubber grommet. If you're not comfortable soldering, consider having a qualified technician install the connector.\u003c\/p\u003e\n\u003ch3\u003eCan this connector handle the signal levels from wireless transmitters?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. The SAPT15 is designed for the low-level balanced audio signals typical in wireless microphone and in-ear monitor systems. The 3-pin configuration provides proper shielding and balanced signal transmission, which is essential for maintaining clean audio in RF-heavy environments like concert venues and houses of worship.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to standard XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eMini XLR connectors like the SAPT15 are physically smaller than standard XLR connectors but use the same 3-pin balanced wiring scheme. They're specifically designed for portable equipment where space is limited, such as bodypack transmitters and compact receivers. Standard XLR connectors won't fit mini XLR ports, making this connector essential for wireless system repairs.\u003c\/p\u003e\n\u003ch3\u003eWhat cable gauge works best with this connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT15 accommodates most standard audio cable gauges used in wireless applications, typically 22-26 AWG. Use high-quality shielded cable for best results, especially in environments with multiple wireless systems or strong RF interference. The rubber grommet provides strain relief for cables up to approximately 6mm outer diameter.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411370440,"sku":"SAPT15","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt15_1000_471520e5-3247-495f-bf6c-2623c2e3fcd3.jpg?v=1765914429"},{"product_id":"connectors-mini-xlr-female-3-pin","title":"SAPT15 (10 Pack) - Mini XLR Female Connector","description":"\u003cp\u003eThe SAPT15 10-pack mini XLR female connectors are essential components for sound engineers, live performers, and mobile DJs who need reliable field repairs and custom cable builds. These professional-grade 3-pin connectors handle the demanding requirements of live sound applications where standard XLR connectors won't fit.\u003c\/p\u003e\n\u003cp\u003eEach connector features a black housing with integrated rubber grommet for secure panel mounting and strain relief. The 3-pin configuration supports balanced audio signals, making these connectors suitable for microphones, instruments, and line-level connections in professional audio systems.\u003c\/p\u003e\n\u003cp\u003eBuilt for durability in live sound environments, these mini XLR connectors provide the same signal integrity as full-size XLR in a compact form factor. The rubber grommet ensures weatherproof sealing when properly installed, while the precision-engineered pins maintain consistent contact pressure for noise-free connections.\u003c\/p\u003e\n\u003cp\u003eSound technicians use these connectors for headset microphone systems, wireless bodypack transmitters, and compact recording interfaces where space constraints demand miniaturized connections. They're particularly valuable for theater productions, houses of worship with lapel microphone systems, and mobile performers who need field-repairable cables.\u003c\/p\u003e\n\u003cp\u003eThe 10-pack quantity provides enough connectors for complete cable harness builds or keeps spare parts on hand for emergency repairs. Each connector includes all necessary hardware for panel mounting or cable termination.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these professional connectors with a one-year warranty and fast shipping. Professional sound demands reliable connections, and these mini XLR connectors deliver consistent performance when standard connectors won't fit the application.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT15 (10 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMini XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGrommet\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10 Pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeadset mics, wireless systems, compact interfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat are mini XLR connectors typically used for?\u003c\/h3\u003e\n\u003cp\u003eMini XLR connectors are commonly found on headset microphones, wireless bodypack transmitters, portable recording interfaces, and professional camcorders. They provide the same balanced audio connection as standard XLR but in applications where space is limited or a smaller profile is required.\u003c\/p\u003e\n\u003ch3\u003eAre these connectors compatible with standard XLR cables?\u003c\/h3\u003e\n\u003cp\u003eNo, mini XLR connectors have a smaller diameter than standard XLR and are not directly compatible. You would need an adapter cable or custom cable with mini XLR on one end and standard XLR on the other to connect between different connector sizes.\u003c\/p\u003e\n\u003ch3\u003eHow do I wire a 3-pin mini XLR connector?\u003c\/h3\u003e\n\u003cp\u003eThe standard wiring follows the same convention as full-size XLR: Pin 1 is ground\/shield, Pin 2 is hot\/positive, and Pin 3 is cold\/negative. Always verify the specific wiring requirements for your equipment, as some manufacturers may use different pin assignments.\u003c\/p\u003e\n\u003ch3\u003eCan these handle phantom power for condenser microphones?\u003c\/h3\u003e\n\u003cp\u003eYes, these 3-pin mini XLR connectors can safely carry phantom power when properly wired and used with compatible equipment. Many professional headset microphones and lapel mics that use mini XLR connectors are designed to operate with phantom power.\u003c\/p\u003e\n\u003ch3\u003eWhat tools do I need to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a small Phillips screwdriver to secure the strain relief, wire strippers, and a soldering iron with fine-tip solder for terminating the connections. The rubber grommet requires no special tools and provides strain relief once the connector is properly assembled.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411370504,"sku":"SAPT15-10Pack","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt15_10pk_1000_568ed857-c1d9-4a6a-9528-40bb6f738ec6.jpg?v=1765914428"},{"product_id":"low-profile-right-angle-guitar-cable-adapters","title":"SAPT204 - Low Profile 1\/4 Inch Mono Right Angle Guitar Cable Connector (10 PACK)","description":"\u003cp\u003eThe SAPT204 transforms straight guitar cables into space-saving right angle connections for tight spaces around pedalboards, amplifiers, and rack gear. This 10-pack of low-profile adapters solves the universal problem of bulky straight plugs that won't fit in cramped setups or create awkward cable runs.\u003c\/p\u003e\n\u003cp\u003eEach adapter converts any standard 1\/4\" TS guitar cable into a right angle connection, eliminating the need to buy dedicated right angle cables for every application. The low-profile design takes up minimal space while maintaining solid electrical contact through full metal construction.\u003c\/p\u003e\n\u003cp\u003eThese TS mono connectors handle instrument-level signals from electric guitars, basses, keyboards, and other line-level gear. The right angle configuration keeps cables close to your equipment, reducing strain on jacks and creating cleaner cable management. Full metal construction ensures reliable signal transfer without interference or signal loss.\u003c\/p\u003e\n\u003cp\u003ePerfect for pedalboard connections where space is tight, amplifier inputs that sit close to walls, or any setup where straight plugs create awkward cable angles. Studio musicians use these to keep patch cables organized, while live performers rely on them to prevent accidental disconnections during shows. Ideal for guitar rigs, bass setups, keyboard rigs, and studio patch bays.\u003c\/p\u003e\n\u003cp\u003eSimply plug the adapter into your existing straight 1\/4\" cable, then connect to your gear's input jack. Each pack includes 10 adapters, giving you enough for multiple instruments or backup spares.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty with fast shipping and expert technical support when you need it.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1\/4\" TS Mono Right Angle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFull Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eProfile\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLow Profile Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGuitar Cable Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePedalboards, tight spaces, cable management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these adapters work with all my guitar cables?\u003c\/h3\u003e\n\u003cp\u003eYes, these adapters work with any standard 1\/4\" TS (tip-sleeve) guitar cable. They convert the straight plug end into a right angle connection while maintaining the same mono signal path. They're compatible with instrument cables from any manufacturer.\u003c\/p\u003e\n\u003ch3\u003eHow much space do these low-profile adapters actually save?\u003c\/h3\u003e\n\u003cp\u003eThe low-profile design reduces the overall length compared to standard right angle plugs, making them ideal for pedalboards where every millimeter counts. They sit much closer to your equipment than bulky right angle cables, preventing interference with adjacent pedals or rack gear.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for stereo signals or just mono instruments?\u003c\/h3\u003e\n\u003cp\u003eThese are TS (tip-sleeve) mono connectors designed specifically for instrument-level signals like guitars and basses. For stereo applications, you'd need TRS (tip-ring-sleeve) adapters. These work perfectly for electric guitars, basses, keyboards sending mono output, and other mono instrument sources.\u003c\/p\u003e\n\u003ch3\u003eDo these adapters affect my guitar's tone or signal quality?\u003c\/h3\u003e\n\u003cp\u003eNo, the full metal construction maintains clean signal transfer without adding noise or affecting your tone. Since they're passive adapters with no active components, they simply redirect your cable's path without altering the electrical signal from your instrument to your amplifier.\u003c\/p\u003e\n\u003ch3\u003eWhy buy a 10-pack instead of just one or two adapters?\u003c\/h3\u003e\n\u003cp\u003eThe 10-pack gives you enough adapters for complex pedalboard setups, multiple instruments, and backup spares. Many guitarists use 6-8 adapters on a single pedalboard, and having extras prevents gig-stopping situations when an adapter gets lost or damaged.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411371080,"sku":"SAPT204","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt-204_800_2891caf6-38e1-4164-8040-79fb8b8c6622.jpg?v=1765914422"},{"product_id":"pedal-board-cable-kit","title":"SAPT205 - Pedal Board Cable Kit - 15 Foot Cable with 12 Low Profile Right Angle 1\/4 Inch TS Plugs","description":"\u003cp\u003eThe SAPT205 pedal board cable kit gives guitarists and bassists everything needed to build custom pedalboard connections that fit tight spaces. This DIY approach lets you create patch cables at exactly the lengths your setup requires while saving significant money over pre-made alternatives.\u003c\/p\u003e\n\u003cp\u003eThe kit includes 15 feet of heavy-duty instrument cable and 12 low-profile right-angle TS plugs specifically designed for pedalboard applications. These compact connectors replace bulky straight plugs, freeing up valuable real estate on crowded pedalboards and allowing pedals to sit closer together.\u003c\/p\u003e\n\u003cp\u003eThe low-profile right-angle design solves the common problem of oversized connectors that force pedals apart or won't fit between closely-spaced jacks. The full-metal construction ensures reliable signal transfer and durability through countless setup changes. With 15 feet of cable, you can typically create 6-8 patch cables depending on your pedalboard layout and spacing requirements.\u003c\/p\u003e\n\u003cp\u003ePerfect for home studios, rehearsal spaces, and live performance rigs where custom cable lengths eliminate excess slack and improve organization. The kit works with any standard guitar pedals, amplifiers, or audio interfaces with 1\/4-inch TS inputs and outputs.\u003c\/p\u003e\n\u003cp\u003eAssembly requires basic soldering skills - you'll need a soldering iron, solder, and wire strippers (not included). The SAPT205 comes with straightforward instructions and is backed by Seismic Audio's one-year warranty plus expert technical support.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Length\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e15 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnectors Included\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e12 low-profile right-angle 1\/4\" TS plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFull metal construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy-duty instrument cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAssembly Required\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eYes (soldering required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom pedalboard patch cables, tight spacing setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat soldering equipment do I need to assemble these cables?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a soldering iron (25-40 watts recommended), rosin-core solder, wire strippers, and a small screwdriver. Basic soldering experience is helpful, though the connections are straightforward. Each plug has clearly marked terminals for tip and sleeve connections.\u003c\/p\u003e\n\u003ch3\u003eHow many patch cables can I make with this kit?\u003c\/h3\u003e\n\u003cp\u003eWith 15 feet of cable and 12 plugs, you can typically create 6-8 patch cables depending on your pedalboard layout. Most pedalboard patches are 6-12 inches long, though you can customize lengths exactly to your needs and eliminate excess cable slack.\u003c\/p\u003e\n\u003ch3\u003eWill these low-profile plugs fit all guitar pedals?\u003c\/h3\u003e\n\u003cp\u003eYes, these standard 1\/4-inch TS plugs work with any guitar pedal, amplifier, or audio interface that accepts instrument cables. The low-profile right-angle design is specifically intended for tight pedalboard spacing where regular straight plugs won't fit or force pedals too far apart.\u003c\/p\u003e\n\u003ch3\u003eHow do these compare to buying pre-made patch cables?\u003c\/h3\u003e\n\u003cp\u003eThis DIY kit costs significantly less than buying equivalent pre-made cables and gives you exact custom lengths. Pre-made cables often come in standard lengths that create excess slack or fall just short of what you need, while these let you optimize every connection.\u003c\/p\u003e\n\u003ch3\u003eWhat's the cable quality like compared to premium brands?\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty instrument cable provides reliable signal transfer with proper shielding for noise-free operation. While not boutique-level, it offers solid performance for most guitarists at a fraction of the cost of high-end alternatives, backed by Seismic Audio's one-year warranty.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411371144,"sku":"SAPT205","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt204_long_1000_953aab32-c47e-421a-b2fc-a3d0a34ff6b3.jpg?v=1765914421"},{"product_id":"22-18-ga-fully-insulated-male-quick-disconnects","title":"SAPT211 - 50 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors","description":"\u003cp\u003eProfessional installers, sound technicians, and DIY audio builders rely on these fully insulated male quick disconnect connectors for reliable speaker connections. The SAPT211 delivers 50 red nylon-insulated spade terminals designed for 22\/18 gauge wire applications.\u003c\/p\u003e\n\u003cp\u003eThese standard 0.25-inch male spade connectors create secure connections between speaker wire and loudspeaker terminals. The full insulation prevents shorts and provides safe handling during installation and maintenance work.\u003c\/p\u003e\n\u003cp\u003eBuilt for 22\/18 gauge wire, these connectors handle the power requirements of most PA speakers, monitors, and sound reinforcement systems. The red nylon insulation is see-through, allowing visual confirmation of proper wire insertion while protecting against accidental contact. Each connector weighs just 0.10 pounds, making them ideal for permanent installations where weight matters.\u003c\/p\u003e\n\u003cp\u003eSound engineers use these connectors for speaker wire termination in live sound rigs, installed church systems, and venue PA setups. Mobile DJs appreciate having a bulk pack on hand for quick repairs and custom cable builds. Installers stock these for connecting amplifiers to passive speakers in restaurants, retail spaces, and conference rooms.\u003c\/p\u003e\n\u003cp\u003eThese spade connectors fit standard speaker terminals found on most PA speakers and amplifiers. No special tools required – simply strip wire, crimp, and connect. The 50-pack quantity ensures you have spares for multiple projects or emergency repairs.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty. Professional-grade components at a practical price point – the reliable choice for your audio connections.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e50 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22\/18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale Spade Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTerminal Width\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.25 inches (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInsulation Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed Nylon (see-through)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.10 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSpeaker wire to loudspeaker terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePA systems, monitor connections, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauge are these connectors designed for?\u003c\/h3\u003e\n\u003cp\u003eThese SAPT211 connectors are specifically designed for 22\/18 gauge wire. The crimping mechanism and terminal opening are sized to create a secure connection with wire in this gauge range. Using wire outside this specification may result in loose connections or difficulty crimping.\u003c\/p\u003e\n\u003ch3\u003eCan I use these connectors with powered PA speakers?\u003c\/h3\u003e\n\u003cp\u003eYes, these male quick disconnect connectors work with both powered and passive PA speakers that have standard 0.25-inch spade terminals. They're commonly used to connect speaker wire from amplifiers to passive speakers, or for internal wiring connections in powered speaker cabinets during repairs or modifications.\u003c\/p\u003e\n\u003ch3\u003eHow many connectors do I need for a typical PA system setup?\u003c\/h3\u003e\n\u003cp\u003eFor a basic stereo PA system with two speakers, you'll need four connectors (positive and negative for each speaker). A small band setup with main speakers and monitors typically uses 8-12 connectors. The 50-pack provides enough connectors for multiple systems plus spares for future repairs or expansions.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and bare spade connectors?\u003c\/h3\u003e\n\u003cp\u003eThe full nylon insulation on these connectors prevents accidental shorts and provides safer handling compared to bare metal spades. The see-through red insulation allows you to visually confirm proper wire insertion while protecting against contact with adjacent terminals. This makes them ideal for permanent installations and professional applications.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors require special crimping tools?\u003c\/h3\u003e\n\u003cp\u003eThese connectors work with standard crimping pliers or wire strippers with crimping capability. Strip about 1\/4 inch of wire insulation, insert the bare wire into the connector barrel, and crimp securely. The nylon insulation helps guide proper placement and provides strain relief for the connection.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411371528,"sku":"SAPT211","price":8.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPT211-50pack_1000_8f277615-cb81-44a3-8163-95b7b63be4d1.jpg?v=1765914420"},{"product_id":"100-pack-22-18-ga-fully-insulated-male-quick-disconnects","title":"SAPT211 - 100 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors","description":"\u003cp\u003eProfessional technicians, live sound engineers, and venue installers need reliable spade connectors that won't fail during critical installations. The SAPT211 delivers a bulk pack of 100 fully insulated male quick disconnect connectors designed for consistent speaker wire terminations in demanding environments.\u003c\/p\u003e\n\u003cp\u003eThese 22\/18 gauge connectors handle standard speaker wire gauges and provide secure connections to loudspeaker terminals, crossover networks, and amplifier outputs. The fully insulated nylon housing prevents short circuits and accidental contact, while the translucent red design allows visual confirmation of proper wire insertion.\u003c\/p\u003e\n\u003cp\u003eEach connector accommodates 22 to 18 gauge wire and terminates to standard 0.25-inch spade terminals found on most PA speakers and subwoofers. The crimped connection creates a gas-tight seal that maintains signal integrity over time, eliminating the intermittent connections that plague twist-on wire nuts and bare wire connections.\u003c\/p\u003e\n\u003cp\u003eWhether you're wiring a church sound system, installing monitors for a touring band, or building custom speaker cables for a venue, these connectors streamline the process. Sound engineers appreciate having a reliable supply on hand for quick repairs during load-in, while installers use them for permanent wiring in commercial facilities and houses of worship.\u003c\/p\u003e\n\u003cp\u003eInstallation requires standard crimping tools for 22\/18 gauge connectors. Each bulk pack contains 100 connectors, providing enough supplies for multiple projects or ensuring your tool kit stays stocked for emergency repairs.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and fast shipping. Professional-grade components at practical prices keep your installations moving forward.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e100 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Gauge Compatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22\/18 Gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale Spade Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTerminal Width\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.25 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInsulation Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight per Connector\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.10 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSpeaker terminals, crossovers, amplifier connections, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauges work with these quick disconnect connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors are specifically designed for 22 and 18 gauge wire, which covers most standard speaker wire used in PA systems and home audio installations. The crimping barrel accommodates both solid and stranded wire within this gauge range. Always verify your wire gauge before crimping to ensure a secure mechanical and electrical connection.\u003c\/p\u003e\n\u003ch3\u003eHow do I properly install these spade connectors on speaker wire?\u003c\/h3\u003e\n\u003cp\u003eStrip approximately 1\/4 inch of insulation from your speaker wire, insert the bare wire into the connector's crimping barrel, and use standard 22\/18 gauge crimping tools to compress the connection. The translucent red housing lets you visually confirm the wire is fully inserted before crimping. A properly crimped connector will hold the wire securely without pulling free under normal handling.\u003c\/p\u003e\n\u003ch3\u003eAre these connectors suitable for permanent installations in commercial venues?\u003c\/h3\u003e\n\u003cp\u003eYes, the fully insulated nylon housing and crimped connection make these appropriate for permanent wiring in churches, schools, and commercial facilities. The insulation prevents accidental shorts when connectors are in close proximity, and the gas-tight crimp maintains signal integrity over years of service. Many installers prefer these over bare wire connections for their reliability and professional appearance.\u003c\/p\u003e\n\u003ch3\u003eWill these fit standard PA speaker terminals and binding posts?\u003c\/h3\u003e\n\u003cp\u003eThese 0.25-inch male spade connectors fit standard speaker terminals found on most PA speakers, subwoofers, and amplifiers. They're compatible with binding posts, spring terminals, and screw terminals that accept spade connections. The flat spade design provides more surface contact area than banana plugs, resulting in lower resistance connections.\u003c\/p\u003e\n\u003ch3\u003eHow many speakers can I wire with a 100-pack of connectors?\u003c\/h3\u003e\n\u003cp\u003eEach speaker typically requires two connectors (positive and negative), so a 100-pack provides enough connectors for 50 speakers. However, if you're also connecting crossover networks or bi-amping speakers, you'll need additional connectors. Professional installers often keep extra packs on hand since these connectors are also useful for amplifier connections and emergency repairs during events.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411371592,"sku":"SAPT211-100Pack","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPT211-100pack_1000_3e65e33d-24da-45af-ba43-377963dfe879.jpg?v=1765914419"},{"product_id":"250-pack-22-18-ga-fully-insulated-male-quick-disconnects","title":"SAPT211 - 250 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors","description":"\u003cp\u003eEssential hardware for sound technicians, installers, and musicians who need reliable speaker wire connections. These fully insulated male quick disconnect connectors handle the critical connection between your amplifier and speakers, ensuring solid electrical contact that won't fail mid-performance.\u003c\/p\u003e\n\u003cp\u003eEach connector accommodates 22\/18 gauge wire with a secure crimp connection that stays put under vibration and temperature changes. The full nylon insulation prevents short circuits and provides a professional finish that won't crack or split over time.\u003c\/p\u003e\n\u003cp\u003eThe 0.25-inch male spade terminal fits standard speaker binding posts found on PA speakers, monitors, and subwoofers. At 250 connectors per pack, you'll have enough for multiple installations or repairs. The red insulation color coding helps with positive terminal identification during setup and troubleshooting.\u003c\/p\u003e\n\u003cp\u003ePerfect for permanent installations in churches and venues, mobile DJ rigs that get assembled and torn down regularly, or repair shops that service multiple systems. Essential for any tech building custom speaker cables or retrofitting existing systems with reliable connections.\u003c\/p\u003e\n\u003cp\u003eStandard crimp installation requires basic wire strippers and crimping pliers. Connects directly to speaker binding posts without additional adapters. Package includes 250 individual connectors with see-through packaging for easy inventory management.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty with direct customer service support. Ships fast so you can complete installations and repairs without delays.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT211-250Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e250 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTerminal Connector for Loud Speaker, Spade Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale Spade Connectors Standard 0.25 Inches Width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22\/18 Gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInsulation\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFully Insulated Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.10 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackaging\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSee-through Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePA speakers, monitors, permanent installs, mobile rigs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauge do these connectors accept?\u003c\/h3\u003e\n\u003cp\u003eThese connectors are designed for 22\/18 gauge speaker wire, which covers the most common wire sizes used in PA systems and home audio installations. The crimp barrel accommodates both solid and stranded wire within this gauge range. Make sure to strip about 1\/4 inch of insulation for proper contact area.\u003c\/p\u003e\n\u003ch3\u003eDo these fit standard PA speaker binding posts?\u003c\/h3\u003e\n\u003cp\u003eYes, the 0.25-inch male spade terminal is the industry standard size that fits binding posts on virtually all PA speakers, monitors, and subwoofers. This includes brands like Seismic Audio, JBL, QSC, and others. The connector slides onto the binding post and provides a secure mechanical and electrical connection.\u003c\/p\u003e\n\u003ch3\u003eHow many speaker connections can I make with one pack?\u003c\/h3\u003e\n\u003cp\u003eEach speaker typically requires two connectors (positive and negative), so this 250-pack will handle 125 individual speakers or 62 stereo pairs. For a typical small venue setup with 4-6 speakers plus monitors, you'll have plenty for the initial installation plus spares for future repairs or expansions.\u003c\/p\u003e\n\u003ch3\u003eWhat tools do I need to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eYou'll need basic wire strippers to remove insulation and a crimping tool designed for spade terminals. Most electrical crimpers or automotive terminal crimpers work fine. Strip 1\/4 inch of wire insulation, insert into the connector barrel, and crimp firmly to ensure good contact.\u003c\/p\u003e\n\u003ch3\u003eAre these better than banana plugs for speaker connections?\u003c\/h3\u003e\n\u003cp\u003eSpade connectors provide more surface contact area than banana plugs, resulting in lower resistance and better long-term reliability. They're also less likely to work loose from vibration, making them ideal for mobile applications and permanent installations. The insulation prevents accidental shorts when terminals are close together.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411371656,"sku":"SAPT211-250Pack","price":30.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPT211-250pack_1000_e1718749-0d01-4b00-8bb8-4a67a45de549.jpg?v=1765914418"},{"product_id":"500-pack-22-18-ga-fully-insulated-male-quick-disconnects","title":"SAPT211 - 500 Pack of Fully Insulated 22\/18 Gauge Male Quick Disconnect Wire Connectors","description":"\u003cp\u003eProfessional audio techs, sound engineers, and DIY installers need reliable spade connectors for speaker connections and wire repairs. The SAPT211 delivers a bulk pack of 500 fully insulated male quick disconnect connectors designed for 22\/18 gauge wire applications.\u003c\/p\u003e\n\u003cp\u003eThese red nylon-insulated spade connectors provide secure terminations for speaker wire connections to PA speakers, monitors, and sound system components. The 0.25-inch standard width fits most speaker terminals and binding posts found on live sound equipment.\u003c\/p\u003e\n\u003cp\u003eBuilt for 22\/18 gauge wire, these connectors handle the wire sizes commonly used in PA system installations and mobile DJ setups. The fully insulated design prevents shorts and accidental contact, while the see-through red nylon housing allows visual confirmation of proper wire insertion. Each connector weighs just 0.10 lbs, making them practical for field repairs and permanent installations.\u003c\/p\u003e\n\u003cp\u003eSound techs use these connectors for speaker cable repairs, custom cable builds, and converting bare wire to spade terminals for cleaner connections. Mobile DJs rely on them for quick cable fixes during gigs, while installation crews stock them for church sound systems and venue PA builds. The bulk 500-pack ensures you have connectors on hand for multiple projects and emergency repairs.\u003c\/p\u003e\n\u003cp\u003eSimply strip your 22\/18 gauge wire, crimp the connector, and plug into any standard 0.25-inch spade terminal. No additional tools beyond wire strippers and crimpers required.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships nationwide. Professional-grade components at a price that makes sense for bulk installations and repair shops.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT211-500Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22\/18 Gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale Quick Disconnect Spade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTerminal Width\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.25 inches (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFully Insulated Red Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight per Connector\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.10 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackage Quantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e500 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePA installations, cable repairs, mobile DJ setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauge do these connectors fit?\u003c\/h3\u003e\n\u003cp\u003eThese SAPT211 connectors are designed specifically for 22\/18 gauge wire. The crimp barrel is sized to securely grip wire in this gauge range. Using wire outside this specification may result in poor connections or connector damage.\u003c\/p\u003e\n\u003ch3\u003eWill these fit my PA speakers and monitors?\u003c\/h3\u003e\n\u003cp\u003eYes, these 0.25-inch width spade connectors fit standard speaker terminals found on most PA speakers, floor monitors, and powered speakers. This is the industry-standard size for professional audio equipment. Always verify your speaker's terminal size before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow many connectors do I need for a typical sound system setup?\u003c\/h3\u003e\n\u003cp\u003eA basic DJ setup with two main speakers requires 4 connectors (positive and negative for each speaker). Churches and venues typically need 20-50 connectors for a complete installation including mains, monitors, and fills. The 500-pack covers multiple installations or provides ample stock for ongoing maintenance.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for outdoor events and permanent installations?\u003c\/h3\u003e\n\u003cp\u003eThe fully insulated nylon housing provides protection against accidental shorts and environmental exposure. While suitable for outdoor events, these connectors work best in covered applications or temporary setups rather than permanent outdoor installations exposed to weather.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eYou'll need basic wire strippers to prepare your cable and a crimping tool to secure the connector to the wire. Standard electrical crimpers work fine for installation. The connectors are designed for hand-crimp application and don't require specialized professional crimping tools.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411371912,"sku":"SAPT211-500Pack","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPT211-500pack_1000_38f666e6-6d66-4ede-bbe5-dd9cad50122e.jpg?v=1765914417"},{"product_id":"power-cable-connector-3-pole","title":"SAPT213 - Power Cable Connector - 3 Pole","description":"\u003cp\u003eThe SAPT213 3-pole power connector delivers secure, professional-grade AC power connections for touring rigs, permanent installations, and mobile setups where reliable power distribution matters. Built for sound engineers, venue techs, and performers who need connections that won't fail mid-show.\u003c\/p\u003e\n\u003cp\u003eThis twist-lock connector handles 20 amps at 250 volts through three-pole wiring (line, neutral, and ground), eliminating the power drops and intermittent failures that plague standard connections. The metal latch lock mechanism ensures cables stay connected even with stage movement and cable pulls.\u003c\/p\u003e\n\u003cp\u003eThe 20-amp rating supports high-power amplifiers, active speakers, and lighting rigs without voltage sag. Three-pole design provides proper grounding for sensitive audio equipment, reducing hum and interference in your signal chain. Solderless terminations make field repairs and custom cable builds straightforward without specialized tools.\u003c\/p\u003e\n\u003cp\u003ePerfect for rack-mounted power distribution, stage box connections, and temporary event setups where you're constantly connecting and disconnecting power feeds. Works equally well in churches running permanent installs and mobile DJs who need bulletproof connections for outdoor gigs and wedding receptions.\u003c\/p\u003e\n\u003cp\u003eThe connector accepts standard 12-14 AWG wire for most pro audio applications. Twist-lock design prevents accidental disconnection during performances or load-in situations.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs the SAPT213 with a one-year warranty and ships ready to wire into your power distribution system.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-Pole Power Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e250 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWiring Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLine, Neutral, Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolderless 3 Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Latch Twist Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWire Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e12-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable Metal Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePower distribution, rack systems, stage connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wire gauge does the SAPT213 accept?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT213 accepts 12-14 AWG wire through its solderless termination system. This covers most pro audio power applications including amplifier feeds, active speaker connections, and lighting distribution. The solderless design means you can make field connections without specialized crimping tools.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for outdoor events?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT213's metal housing and twist-lock design make it suitable for outdoor events where standard connections might fail. The 20-amp rating handles most portable PA systems and the secure locking prevents disconnection from wind, foot traffic, or equipment movement during outdoor gigs.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to standard power connectors?\u003c\/h3\u003e\n\u003cp\u003eUnlike standard AC connectors that can pull apart under load, the SAPT213 uses a twist-lock mechanism that requires intentional unlocking. The metal latch provides additional security, and the 20-amp\/250-volt rating exceeds most standard household connections, making it ideal for professional audio equipment that draws significant power.\u003c\/p\u003e\n\u003ch3\u003eShould I disconnect this connector under load?\u003c\/h3\u003e\n\u003cp\u003eNo, never connect or disconnect the SAPT213 under load. Always power down equipment before making or breaking connections to prevent arcing and potential damage to both the connector and your equipment. This is standard practice for all professional power connections.\u003c\/p\u003e\n\u003ch3\u003eWhat size venues can this connector handle?\u003c\/h3\u003e\n\u003cp\u003eThe 20-amp rating supports power distribution for venues up to 500 people, depending on your equipment load. This includes most club gigs, wedding receptions, and small outdoor festivals where you're running multiple amplifiers, active speakers, and lighting from distributed power sources.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411372040,"sku":"SAPT213","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt213_1000_a05340be-b4da-4934-a000-665898aab878.jpg?v=1765914416"},{"product_id":"pair-of-power-cable-connectors-and-receptacles","title":"Pair of Power Cable Connectors and Power Receptacles - 3 Pole","description":"\u003cp\u003eProfessional power cable connectors and receptacles designed for rack-mounted audio equipment, amplifiers, and power distribution systems where secure, locking connections are essential. This matched pair provides both the male connector and female panel-mount receptacle for complete power connection solutions.\u003c\/p\u003e\n\u003cp\u003eEach connector features twist-lock technology that prevents accidental disconnection during performances or installations. The 3-pole design handles line, neutral, and ground connections for standard AC power applications, while the metal latch lock mechanism ensures cables stay firmly seated even in high-vibration environments.\u003c\/p\u003e\n\u003cp\u003eThe solderless termination design allows for quick, reliable connections without requiring specialized soldering equipment. Both connectors use heavy-duty construction with metal housings that resist wear from repeated connect\/disconnect cycles. The panel-mount receptacle installs cleanly in rack cases, amplifier enclosures, or custom power distribution panels.\u003c\/p\u003e\n\u003cp\u003eThese connectors work well in touring rack systems, permanent installations at venues, and custom power distribution setups where equipment must be frequently connected and disconnected. They're particularly valuable for mobile DJ setups, band rigs, and church sound systems where reliable power connections prevent mid-performance failures.\u003c\/p\u003e\n\u003cp\u003eInstallation requires standard wire stripping tools and basic electrical knowledge. The package includes one male power connector and one female panel-mount receptacle. Seismic Audio backs these connectors with reliable construction for professional applications and fast shipping to get your system running.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT213-231-2Each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pole (line, neutral, ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolderless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTwist-lock with metal latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackage Contents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1 power connector, 1 panel receptacle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel mount receptacle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAC power connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRack systems, power distribution, professional audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the connector and receptacle in this pair?\u003c\/h3\u003e\n\u003cp\u003eThe connector is the male plug that attaches to your power cable, while the receptacle is the female socket that mounts into your equipment panel or rack case. Together they create a secure, locking power connection that prevents accidental disconnection during use.\u003c\/p\u003e\n\u003ch3\u003eHow does the twist-lock mechanism work?\u003c\/h3\u003e\n\u003cp\u003eInsert the male connector into the female receptacle and twist clockwise until it locks in place. The metal latch mechanism holds the connection securely until you twist counterclockwise to release. This prevents cables from falling out due to vibration or accidental tugging.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eYou'll need basic wire stripping tools and a screwdriver for the panel mount installation. The solderless design means no soldering equipment is required - just strip the wires and secure them in the terminal connections following standard electrical practices.\u003c\/p\u003e\n\u003ch3\u003eWhat size equipment racks or panels do these work with?\u003c\/h3\u003e\n\u003cp\u003eThe panel-mount receptacle fits standard equipment rack mounting holes and can be installed in custom power distribution panels, amplifier rear panels, or rack-mount power strips. They're commonly used in 19-inch audio equipment racks and mobile DJ cases.\u003c\/p\u003e\n\u003ch3\u003eAre these connectors suitable for high-current amplifier applications?\u003c\/h3\u003e\n\u003cp\u003eThese 3-pole connectors handle standard AC power connections for most professional audio equipment. However, for high-current amplifier applications over 15 amps, verify your specific power requirements and local electrical codes before installation to ensure proper current rating.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411372104,"sku":"SAPT213-231-2Each","price":30.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPT213-231-2Each_0b0645e6-0dd5-456f-ae2a-e66c30fe8721.jpg?v=1765914415"},{"product_id":"pair-of-power-cable-connectors-3-pole","title":"SAPT213 - Power Cable Connector - 3 Pole (2 Pack)","description":"\u003cp\u003eThe SAPT213 Power Cable Connectors serve professional audio setups that need reliable, twist-locking AC power connections for powered speakers, amplifiers, and other live sound equipment. This 2-pack provides backup connectors or allows you to wire multiple power distribution points in your rig.\u003c\/p\u003e\n\u003cp\u003eThese 3-pole connectors handle 20 amps at 250 volts, supporting high-powered PA systems and amplifiers that demand stable electrical connections. The twist-lock mechanism prevents accidental disconnections during performances, while the metal latch provides secure engagement you can feel and hear.\u003c\/p\u003e\n\u003cp\u003eEach connector features three conductors for line, neutral, and ground wiring, with solderless terminations that simplify installation. The 20-amp rating supports most powered speakers and rack-mounted amplifiers in professional applications. The twist-lock design follows industry standards, making these compatible with existing power distribution systems.\u003c\/p\u003e\n\u003cp\u003eMobile DJs running multiple powered speakers benefit from the secure connections during load-in and breakdown. Band setups with rack-mounted gear gain professional power distribution without worrying about loose connections. Venue installations use these connectors for permanent power drops that need frequent equipment changes.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic electrical knowledge for proper line, neutral, and ground wiring. The connectors accept standard 12 AWG power cable and feature clearly marked terminals for safe wiring.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships them ready to wire into your power distribution system.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT213 (2 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 Pole Power Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e250 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWiring\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 Pole (Line, Neutral, Ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolderless 3 Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking Mechanism\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Latch Twist Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable Metal Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSafety Notice\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDo Not Connect\/Disconnect Under Load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackage Contents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Power Cable Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePowered speakers, amplifiers, power distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat type of power cable do I need with these connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors work with 12 AWG or 14 AWG power cable rated for 20 amps at 250 volts. You'll need to wire the line (hot), neutral, and ground conductors to the clearly marked terminals inside each connector. The solderless design means you strip the wire ends and secure them with the built-in terminals.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for my powered PA speakers?\u003c\/h3\u003e\n\u003cp\u003eYes, these 20-amp rated connectors work well with most powered PA speakers and subwoofers. They're particularly useful for mobile setups where you need secure power connections that won't accidentally come loose during transport or performance. The twist-lock design is standard in professional audio power distribution.\u003c\/p\u003e\n\u003ch3\u003eHow do the twist-lock connectors prevent disconnection?\u003c\/h3\u003e\n\u003cp\u003eThe metal latch mechanism requires you to insert the connector and twist it clockwise to lock in place. This creates a positive mechanical connection that can't be pulled apart accidentally. To disconnect, you twist counterclockwise while pulling - this prevents accidental power loss during shows.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and regular power connectors?\u003c\/h3\u003e\n\u003cp\u003eRegular power connectors rely on friction fit and can pull apart under cable tension or vibration. These twist-lock connectors mechanically engage and stay connected until deliberately unlocked. This makes them ideal for touring rigs, outdoor events, or any situation where reliable power connections are critical.\u003c\/p\u003e\n\u003ch3\u003eDo I need an electrician to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eBasic electrical knowledge is recommended for safe installation, including understanding line, neutral, and ground wiring. If you're comfortable wiring standard electrical outlets, you can handle these connectors. However, for permanent installations or if you're unsure about electrical safety, consult a qualified electrician.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411372232,"sku":"SAPT213-2Pack","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt213_2pk_1000_2e41011c-9cec-4f15-8290-c3e538aa9edf.jpg?v=1765914414"},{"product_id":"xlr-male-black-panel-mount-connector","title":"SAPT214 - XLR Male Panel Mount Connector - Black Plastic Housing","description":"\u003cp\u003eThe SAPT214 XLR male panel mount connector is designed for sound engineers, studio builders, and installers who need reliable XLR connections in custom panels, rack cases, or permanent installations. This connector solves the common challenge of adding professional XLR inputs to custom audio setups without compromising signal integrity.\u003c\/p\u003e\n\u003cp\u003eBuilt with a durable black plastic housing, this panel-mount connector provides secure XLR male connections for microphones, instruments, and line-level signals. The solder cup termination allows for permanent, low-resistance connections that maintain signal quality over years of use.\u003c\/p\u003e\n\u003cp\u003eThe connector fits standard Series D hole patterns, making installation straightforward in most professional audio panels and enclosures. The heavy-duty plastic housing resists wear from repeated cable connections while maintaining proper electrical isolation. Solder cup terminals accommodate standard gauge audio wire for reliable field installation.\u003c\/p\u003e\n\u003cp\u003ePerfect for recording studios expanding input channels, live sound engineers building custom snake boxes, or churches installing permanent microphone connections in podiums and walls. The panel-mount design works well in rack-mounted preamp units, mixing console expansions, or any application requiring clean XLR connections through a panel surface.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills to connect your audio cable to the solder cups. The connector mounts from the front of your panel with the included hardware, creating a professional flush-mounted XLR connection point.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty, this connector delivers the reliability needed for professional installations at a practical price point.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Male Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder Cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecording channels, panel installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhat's in Box\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Male Panel Mount Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStudios, installations, custom panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hole size do I need to mount this XLR connector?\u003c\/h3\u003e\n\u003cp\u003eThis connector fits the standard Series D hole pattern, which is the industry standard for XLR panel mounts. You'll need a 7\/8-inch (22mm) diameter hole in your panel or enclosure. The connector includes mounting hardware to secure it from the front of the panel.\u003c\/p\u003e\n\u003ch3\u003eHow do I wire this panel mount connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT214 features solder cup termination on the back. Connect your audio cable's conductors to the appropriate solder cups: pin 1 for ground\/shield, pin 2 for positive\/hot, and pin 3 for negative\/cold following standard XLR wiring conventions. Use standard gauge audio wire for best results.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for both microphone and line level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, this XLR male connector handles both microphone and line level signals. The connector itself doesn't affect signal level - that's determined by your connected equipment. It's suitable for microphones, instruments with XLR outputs, or line-level equipment in professional audio installations.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between this and a female panel mount connector?\u003c\/h3\u003e\n\u003cp\u003eThis male connector receives XLR cables with female ends, typically used for outputs from your panel to external equipment. Female panel mount connectors receive male XLR cables and are typically used for inputs into your system. Choose based on your signal flow direction.\u003c\/p\u003e\n\u003ch3\u003eIs this connector suitable for permanent installations?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. The heavy-duty plastic housing and solder cup connections make this ideal for permanent installations in studios, churches, venues, or custom equipment builds. The Series D mounting pattern ensures compatibility with professional audio standards and long-term reliability.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411372296,"sku":"SAPT214","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt214_front_1000_872c518b-c5c8-4c77-8728-f7d688f9e945.jpg?v=1765914413"},{"product_id":"xlr-male-black-panel-mount-connector-5-pack","title":"SAPT214 - XLR Male Panel Mount Connector - Black Plastic Housing (5 Pack)","description":"\u003cp\u003eEssential XLR male panel mount connectors for sound engineers, recording studio builders, and live sound techs who need to add or replace input connections on mixing boards, rack gear, and custom audio panels. These black plastic housing connectors provide the foundation for professional audio connectivity in permanent installations.\u003c\/p\u003e\n\u003cp\u003eEach SAPT214 connector delivers reliable XLR male termination with solder cup connections that ensure solid electrical contact for mic and line level signals. The heavy-duty black plastic housing resists wear while maintaining the precise fit that professional audio demands.\u003c\/p\u003e\n\u003cp\u003eBuilt to standard Series D hole patterns, these connectors drop into existing panel cutouts without modification. The solder cup termination accepts standard audio cable gauge and provides room for proper strain relief. Quality construction means these connectors will handle daily studio use or permanent installation demands without signal degradation or mechanical failure.\u003c\/p\u003e\n\u003cp\u003ePerfect for expanding channel counts on mixing consoles, building custom patch panels, or retrofitting older equipment with fresh connections. Recording studios use these when adding new input channels, while live sound companies rely on them for rack case modifications and snake box repairs.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills and standard audio cable. Each connector includes the mounting hardware needed for secure panel installation. With Seismic Audio's one-year warranty and fast shipping, you get professional-grade connectivity components that keep your audio chain reliable and your projects on schedule.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackage Quantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Male Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder Cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecording\/Live Sound Panel Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStudio builds, rack modifications, panel repairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hole size do these XLR connectors require?\u003c\/h3\u003e\n\u003cp\u003eThese SAPT214 connectors fit standard Series D hole patterns, which is the industry standard for XLR panel mounts. If you're replacing existing XLR connectors or using pre-punched rack panels, these will fit without modification. The Series D pattern ensures compatibility with virtually all professional audio equipment panels.\u003c\/p\u003e\n\u003ch3\u003eDo I need any special tools to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eYou'll need basic soldering equipment and skills to attach your audio cables to the solder cup terminals. Standard 60\/40 rosin core solder works well for audio applications. The connectors include mounting hardware, so you won't need additional screws or washers for panel installation.\u003c\/p\u003e\n\u003ch3\u003eCan these handle both microphone and line level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, these XLR male connectors work with any signal level that uses XLR connectivity - microphones, line level sources, and even digital audio signals. The connector itself doesn't affect signal level; it simply provides the physical and electrical connection point. The quality of your cable and termination work determines signal integrity.\u003c\/p\u003e\n\u003ch3\u003eHow do these compare to metal housing XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eBlack plastic housing offers good durability at a lower cost than metal alternatives, making these ideal for permanent installations where the connectors won't see constant plugging and unplugging. For portable gear that gets heavy use, metal housing may be worth the extra cost, but for studio builds and fixed installations, these plastic versions provide reliable service.\u003c\/p\u003e\n\u003ch3\u003eWhat's the best way to wire these for balanced audio?\u003c\/h3\u003e\n\u003cp\u003eFollow standard XLR wiring convention: Pin 1 for ground\/shield, Pin 2 for positive\/hot, and Pin 3 for negative\/cold. This maintains proper balanced audio operation and ensures compatibility with all professional audio equipment. Always double-check your wiring before powering up connected equipment to avoid damage.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411372360,"sku":"SAPT214-5Pack","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt214_5pk_1000_f392586e-0e46-4f12-9db2-c37c28c9e030.jpg?v=1765914412"},{"product_id":"xlr-female-black-panel-mount-connector","title":"SAPT219 - XLR Female Panel Mount Connector - Black Metal Housing","description":"\u003cp\u003eThe SAPT219 XLR Female Panel Mount Connector delivers professional-grade connectivity for recording studios, live sound rigs, and custom installation projects. Built with a heavy-duty black metal housing and Series D hole pattern compatibility, this connector handles the demanding requirements of pro audio applications.\u003c\/p\u003e\n\u003cp\u003eThis panel mount connector provides secure, permanent XLR input connections for rack cases, mixing consoles, stage boxes, and custom audio panels. The solder cup termination ensures reliable signal transfer and long-term durability in high-use environments.\u003c\/p\u003e\n\u003cp\u003eThe black metal housing offers superior shielding and professional appearance compared to plastic alternatives. Series D hole pattern compatibility means it fits standard panel cutouts used throughout the pro audio industry. Solder cup terminals accommodate various wire gauges and provide strain relief for permanent installations.\u003c\/p\u003e\n\u003cp\u003eRecording engineers use these connectors when building custom patch bays or expanding console inputs. Live sound technicians install them in road cases and snake boxes for touring rigs. Houses of worship and venues integrate them into permanent audio installations where reliable, low-noise connections are essential.\u003c\/p\u003e\n\u003cp\u003eThe connector mounts through standard panel holes and connects via solder cup terminals on the rear. Installation requires basic soldering skills and standard electrical tools. Each unit includes the complete connector assembly ready for installation.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs the SAPT219 with a one-year warranty and ships nationwide. Professional reliability meets accessible pricing for audio professionals and serious enthusiasts alike.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT219\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Female Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder Cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecording\/Live Sound Expansion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhat's in Box\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Female Panel Mount Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom panels, rack cases, studio builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hole size do I need to mount the SAPT219 connector?\u003c\/h3\u003e\n\u003cp\u003eThis connector fits standard Series D hole patterns commonly used in pro audio equipment. The Series D pattern is an industry standard found on most mixing consoles, rack panels, and stage boxes, so it will match existing cutouts in professional audio gear.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for both studio recording and live sound applications?\u003c\/h3\u003e\n\u003cp\u003eYes, the heavy-duty black metal housing and solder cup termination make it suitable for both permanent studio installations and touring live sound rigs. The metal construction provides better shielding than plastic connectors, making it ideal for environments with potential RF interference.\u003c\/p\u003e\n\u003ch3\u003eWhat soldering skills do I need to install this connector?\u003c\/h3\u003e\n\u003cp\u003eBasic soldering experience is recommended since you'll be working with solder cup terminals. The terminals accept standard audio cable wire gauges and provide good access for soldering. If you're comfortable soldering XLR cables, you can handle this installation.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to chassis-mount XLR connectors?\u003c\/h3\u003e\n\u003cp\u003ePanel mount connectors like the SAPT219 install flush with the panel surface and are designed for permanent installations in custom builds or equipment modification. Chassis mount versions typically have flanges and are used in factory equipment manufacturing.\u003c\/p\u003e\n\u003ch3\u003eWhat type of projects typically use panel mount XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eCommon applications include custom recording studio patch bays, expanding input\/output panels on mixing consoles, building stage boxes for live sound, and creating permanent audio connections in houses of worship or commercial installations.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411374216,"sku":"SAPT219","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt219_1000_3a15813f-0085-4609-9b65-19c160d78512.jpg?v=1765914410"},{"product_id":"5-pack-of-xlr-female-black-panel-mount-connectors","title":"SAPT219 (5 Pack) - XLR Female Panel Mount Connectors - Black Metal Housing","description":"\u003cp\u003eProfessional XLR female panel mount connectors designed for studio builders, venue installers, and audio technicians who need to add microphone inputs to mixing consoles, patch bays, or custom audio panels. Each connector features a black metal housing that matches professional rack equipment and provides long-term durability in high-use environments.\u003c\/p\u003e\n\u003cp\u003eThese connectors handle standard balanced microphone signals and line-level audio, delivering clean signal transfer through solder cup terminations that ensure solid electrical connections. The metal construction provides superior shielding compared to plastic alternatives, reducing electromagnetic interference in dense equipment racks.\u003c\/p\u003e\n\u003cp\u003eBuilt to Series D hole pattern specifications, these connectors fit standard 24mm panel cutouts found on most professional audio equipment. The solder cup design accommodates 22-24 AWG wire, while the metal housing provides proper grounding through the mounting nut. Each connector includes all necessary hardware for secure panel mounting.\u003c\/p\u003e\n\u003cp\u003eUse these for expanding input channels on mixing boards, building custom DI boxes, or retrofitting older equipment with additional microphone inputs. They're equally suited for permanent installations in churches, schools, and recording studios where reliable long-term performance matters more than quick connections.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills and a 24mm hole saw or step bit for panel preparation. Each pack includes five complete connectors with mounting hardware.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships them ready to install. Professional-grade construction at a practical price point for projects requiring multiple connections.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT219 (5 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eXLR Female Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder Cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStudio builds, panel modifications, equipment expansion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hole size do I need to cut for these XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors follow the standard Series D hole pattern, which requires a 24mm (approximately 15\/16 inch) diameter hole. Most professional audio equipment uses this same standard, so these will fit existing panel cutouts or new holes cut with a standard chassis punch or step bit.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors work for both microphone and line level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, these XLR female connectors handle any balanced audio signal including microphone level, line level, and AES digital audio. The connector itself doesn't affect signal level – that's determined by the equipment you're connecting and any preamps or processing in your signal chain.\u003c\/p\u003e\n\u003ch3\u003eWhat wire gauge works best with the solder cup terminals?\u003c\/h3\u003e\n\u003cp\u003eThe solder cups accommodate 22-24 AWG wire, which covers standard microphone cable and most audio installation wire. Use stranded wire rather than solid core for better flexibility and vibration resistance in audio applications.\u003c\/p\u003e\n\u003ch3\u003eCan I mount these in plastic equipment panels or do they need metal?\u003c\/h3\u003e\n\u003cp\u003eWhile these work in both metal and plastic panels, metal panels provide better shielding and grounding. If using plastic panels, ensure you run a separate ground wire from the connector shell to your equipment's ground reference for proper shielding.\u003c\/p\u003e\n\u003ch3\u003eHow do these compare to Neutrik connectors for studio use?\u003c\/h3\u003e\n\u003cp\u003eThese provide similar electrical performance to name-brand connectors at a lower cost per unit, making them ideal for multi-connector projects where budget matters. The metal housing and solder cup design deliver professional reliability for permanent installations.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411375048,"sku":"SAPT219-5Pack","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt219_5pk_1000_166b7128-2d5a-4ac6-a30f-bfd2713b6065.jpg?v=1765560380"},{"product_id":"panelk-connector-5-pin-xlr-male-mini","title":"SAPT22 - Male Mini XLR 5 Pin Panel Connector","description":"\u003cp\u003eThe SAPT22 5-pin mini XLR panel mount connector is built for audio engineers, venue installers, and equipment manufacturers who need reliable connection points in custom audio installations. This male connector provides a secure, professional mounting solution for integrating 5-pin mini XLR connections directly into equipment panels, rack cases, or permanent installations.\u003c\/p\u003e\n\u003cp\u003eThis panel mount connector delivers the same robust connection quality as standard XLR connectors in a compact mini format. The 5-pin configuration supports advanced audio applications including stereo signals, phantom power distribution, and specialized pro audio protocols that require additional conductors beyond standard 3-pin connections.\u003c\/p\u003e\n\u003cp\u003eThe connector features professional-grade metal construction with gold-plated contacts for reliable signal transmission and corrosion resistance. The threaded panel mount design ensures secure installation in equipment panels up to standard thickness, while the compact mini XLR form factor saves valuable panel real estate compared to full-size XLR connectors.\u003c\/p\u003e\n\u003cp\u003eCommon applications include custom DJ booth installations, permanent venue sound system integration, broadcast equipment panels, and professional recording studio patch bays. This connector works particularly well in installations where space is limited but 5-pin connectivity is required, such as compact mixer panels or mobile DJ setups with integrated connection points.\u003c\/p\u003e\n\u003cp\u003eThe SAPT22 accepts any standard 5-pin mini XLR male cable and mounts through a panel opening with the included mounting hardware. Each connector comes with Seismic Audio's one-year warranty and ships the same day when ordered before 3 PM EST.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5-Pin Mini XLR Male Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePin Count\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGold-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eThreaded panel mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom installations, equipment panels, DJ booths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat equipment does this 5-pin mini XLR panel connector work with?\u003c\/h3\u003e\n\u003cp\u003eThis male panel mount connector works with any device that uses a 5-pin mini XLR female cable connection. Common applications include high-end DJ mixers, broadcast equipment, professional lighting controllers, and custom audio installations where the additional pins are needed for stereo signals or specialized control protocols.\u003c\/p\u003e\n\u003ch3\u003eHow do I install this panel mount connector?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires drilling the appropriate sized hole in your panel, inserting the connector from the front, and securing it with the included threaded ring from behind. The connector is designed for standard panel thicknesses and creates a professional, flush-mounted connection point that won't pull loose under normal use.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between 3-pin and 5-pin mini XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eWhile 3-pin XLR handles standard mono audio signals, 5-pin mini XLR supports stereo audio, phantom power distribution, or specialized protocols that require additional conductors. This makes 5-pin connectors essential for DJ equipment, broadcast gear, and professional installations where multiple signals need to pass through a single compact connection.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for permanent venue installations?\u003c\/h3\u003e\n\u003cp\u003eYes, this panel mount connector is ideal for permanent installations in DJ booths, broadcast studios, or venue sound systems. The threaded mounting design and professional construction ensure the connection point remains secure and reliable even with frequent cable connections and disconnections over time.\u003c\/p\u003e\n\u003ch3\u003eWhat cable do I need to connect to this panel mount connector?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a cable with a 5-pin mini XLR female connector on the end that connects to this panel mount. The other end of your cable should match whatever equipment you're connecting to, whether that's another XLR connector, 1\/4\" plugs, or other professional audio connectors depending on your specific setup requirements.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411375752,"sku":"SAPT22","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt22_1000.jpg?v=1765561481"},{"product_id":"panel-connectors-5-pin-xlr-male-mini","title":"SAPT22 (2 Pack)- Male Mini XLR 5 Pin Panel Connector","description":"\u003cp\u003eProfessional panel-mount mini XLR connectors for rack systems, flight cases, and custom installations where compact 5-pin connections are essential. These SAPT22 connectors handle DMX lighting control, phantom power applications, and specialized audio gear integration.\u003c\/p\u003e\n\u003cp\u003eThe 5-pin mini XLR design provides the same functionality as standard XLR in a space-saving form factor. Panel-mount configuration creates secure, flush connections through equipment racks, DJ controllers, lighting consoles, and custom-built interfaces.\u003c\/p\u003e\n\u003cp\u003eBuilt with high-quality metal contacts and durable housing that maintains reliable connections through repeated use. The compact mini profile fits tight spaces where standard XLR won't work, while the 5-pin configuration supports applications requiring additional conductors beyond basic audio signals.\u003c\/p\u003e\n\u003cp\u003eEssential for lighting technicians building DMX control panels, audio engineers creating custom rack interfaces, and mobile DJs who need secure panel connections in flight cases. Perfect for churches installing permanent sound systems with built-in connection panels, and venues requiring clean, professional cable management.\u003c\/p\u003e\n\u003cp\u003ePanel-mount design requires drilling a mounting hole in your equipment case or rack panel. Connects via standard mini XLR cables (sold separately). Each 2-pack includes two male panel connectors with mounting hardware.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships nationwide. Professional-grade components at a practical price point for installers and performers who need reliable connections without the premium markup.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT22 (2 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Pin Mini XLR Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMount Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHigh Quality Metal Contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDMX lighting, custom rack panels, flight cases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat applications use 5-pin mini XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eDMX lighting control is the most common application, connecting lighting consoles to fixtures and controllers. They're also used for phantom power applications, certain microphone systems, and specialized audio gear that requires more than the standard 3-pin configuration. The compact size makes them ideal for portable equipment and tight installations.\u003c\/p\u003e\n\u003ch3\u003eDo these work with standard XLR cables?\u003c\/h3\u003e\n\u003cp\u003eNo, these require mini XLR cables specifically. Standard XLR plugs are too large for mini XLR jacks. You'll need 5-pin mini XLR cables to connect these panel connectors to your equipment. Mini XLR cables are readily available but sold separately from these panel connectors.\u003c\/p\u003e\n\u003ch3\u003eHow do I install panel-mount connectors in my rack case?\u003c\/h3\u003e\n\u003cp\u003eYou'll need to drill a mounting hole in your panel or case wall - check the connector specifications for the exact hole diameter required. The connector threads through from the front, and you secure it with the included mounting nut from the back. Ensure your panel thickness is compatible with the connector's threading depth.\u003c\/p\u003e\n\u003ch3\u003eAre these suitable for permanent church installations?\u003c\/h3\u003e\n\u003cp\u003eYes, panel-mount connectors work well for permanent installations where you want clean, professional connections built into walls or equipment racks. They provide a more polished appearance than cable pass-throughs and create secure connections that won't accidentally disconnect during services or events.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between male and female panel connectors?\u003c\/h3\u003e\n\u003cp\u003eMale panel connectors (like these SAPT22) have protruding pins and accept female cable ends. Female panel connectors have receptacle sockets and accept male cable ends. Your choice depends on whether your cables terminate in male or female plugs - the panel connector needs to be the opposite gender to create a proper connection.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411375880,"sku":"SAPT22-2Pack","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt22_pair_1000_beb6a3bf-e4ab-4088-b8af-5239d2762353.jpg?v=1765561480"},{"product_id":"2-pole-speakon-panel-mount-connector","title":"SAPT223 - 2 Pole Speakon Panel Mount Connector","description":"\u003cp\u003eThe SAPT223 2 Pole Speakon Panel Mount Connector is built for technicians, venue owners, and audio professionals who need reliable speaker connections for permanent installations. Whether you're upgrading existing gear or building custom speaker cabinets, this panel mount connector provides the secure connection your live sound system demands.\u003c\/p\u003e\n\u003cp\u003eThis connector delivers professional-grade contact integrity with 30-amp rated contacts and a metal latch lock mechanism that ensures your speaker cables stay connected during transport and performance. The robust construction handles the power demands of PA speakers, floor monitors, and subwoofers without introducing resistance or signal loss.\u003c\/p\u003e\n\u003cp\u003eThe SAPT223 fits standard \"D\" series hole patterns, making it a direct replacement for worn or damaged connectors in existing speaker cabinets. The 2-pole configuration handles mono speaker connections efficiently, while the panel mount design saves space compared to bulky alternatives. Installation is straightforward with standard wiring practices.\u003c\/p\u003e\n\u003cp\u003ePerfect for churches upgrading their sound system, venues replacing aging connections, or bands building custom speaker rigs. This connector works with any amplifier or powered mixer that outputs to Speakon connections, handling everything from small coffee shop setups to mid-sized venue installations.\u003c\/p\u003e\n\u003cp\u003eThe connector accepts standard Speakon cables and mounts securely through cabinet walls or rack panels. Each purchase includes one panel mount connector ready for installation.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty and fast shipping, this connector ensures your audio connections stay reliable when it matters most.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT223\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Pole Speakon Panel Mount Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e30 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard \"D\" Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLatch Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Latch Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePole Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount Speaker Connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhat's in Box\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1x 2 Pole Speakon Panel Mount Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSpeaker cabinet repairs, custom builds, venue upgrades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size hole do I need to mount this Speakon connector?\u003c\/h3\u003e\n\u003cp\u003eThis connector fits the standard \"D\" series hole pattern used by most professional audio equipment. You'll need a round cutout that matches industry-standard Speakon panel mount dimensions. If you're replacing an existing connector, this should be a direct fit.\u003c\/p\u003e\n\u003ch3\u003eCan this connector handle powered speakers and high-wattage amplifiers?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT223 features 30-amp rated contacts that can handle the current demands of most PA speakers and powered monitors. This rating makes it suitable for everything from small venue monitors to larger main speakers, though always verify your specific amplifier's current requirements.\u003c\/p\u003e\n\u003ch3\u003eIs this connector compatible with standard Speakon cables?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. This panel mount connector accepts any standard 2-pole Speakon cable with the twist-lock design. The metal latch lock ensures your cables stay securely connected during transport and performance, preventing accidental disconnections.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between 2-pole and 4-pole Speakon connectors?\u003c\/h3\u003e\n\u003cp\u003e2-pole Speakon connectors like the SAPT223 handle mono speaker connections (positive and negative). 4-pole connectors can handle bi-amped speakers or stereo signals. For most PA speakers, floor monitors, and subwoofers, 2-pole is the standard and most common configuration.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for permanent installation in a church or venue?\u003c\/h3\u003e\n\u003cp\u003eYes, this panel mount connector is designed for permanent installations. The robust construction and secure mounting make it ideal for churches, small venues, and other fixed installations where speakers need reliable, long-term connections that won't require frequent maintenance.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411375944,"sku":"SAPT223","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt-223_1000.jpg?v=1765560108"},{"product_id":"2-pole-speakon-panel-mount-connectors","title":"SAPT223 (5 Pack) - 2 Pole Speakon Panel Mount Connectors","description":"\u003cp\u003eProfessional panel mount Speakon connectors built for stage boxes, speaker cabinets, and rack-mounted audio gear. The SAPT223 5-pack gives sound engineers, venue techs, and DIY builders a reliable supply of industry-standard 2-pole connections for speaker installations and repairs.\u003c\/p\u003e\n\u003cp\u003eEach connector delivers secure locking connections that won't pull loose during transport or performance. The metal latch mechanism provides the positive engagement that pro audio demands, while 30-amp contact ratings handle high-power amplifier outputs without voltage drop or heat buildup.\u003c\/p\u003e\n\u003cp\u003eThese connectors fit standard \"D\" series panel cutouts, making them direct replacements for worn or damaged connectors in existing installations. The 2-pole configuration handles standard speaker connections for full-range cabinets, monitors, and single-driver applications. Clean solder terminals and robust housing construction ensure long-term reliability in demanding environments.\u003c\/p\u003e\n\u003cp\u003eInstall these in custom speaker builds, repair damaged connections on existing cabinets, or stock your shop for ongoing maintenance work. They're essential for building stage boxes, updating older PA systems with modern connections, and creating custom audio distribution panels. Venues upgrading from 1\/4\" or binding post connections will appreciate the secure, professional-grade interface.\u003c\/p\u003e\n\u003cp\u003eEach connector accepts standard Speakon plugs and provides the twist-lock security that keeps connections intact during load-in, performance, and breakdown. No loose connections or intermittent failures during critical moments.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and fast shipping. Professional-grade components at prices that make sense for working sound companies and independent techs.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT223 (5 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Pole Speakon Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e30 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard \"D\" Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLatch Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Latch Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSpeaker cabinets, stage boxes, rack panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size hole do I need to cut for these panel mount connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors fit the standard \"D\" series hole pattern used by most Speakon panel mounts. The mounting hole should be approximately 24mm (15\/16\") in diameter. Most audio suppliers carry the proper chassis punch for creating clean, accurate cutouts in metal and plastic panels.\u003c\/p\u003e\n\u003ch3\u003eCan these handle the output from high-power amplifiers?\u003c\/h3\u003e\n\u003cp\u003eYes, the contacts are rated for 30 amps, which handles virtually any professional power amplifier output. This rating covers everything from 100-watt monitor amps to 2000+ watt subwoofer amplifiers. The robust contact design prevents voltage drop and heat buildup even under sustained high-power operation.\u003c\/p\u003e\n\u003ch3\u003eAre these compatible with all Speakon cables and plugs?\u003c\/h3\u003e\n\u003cp\u003eThese accept any standard 2-pole or 4-pole Speakon plug, though you'll only have access to the +1 and -1 connections (poles 1+ and 1-). If you're using 4-pole cables, the +2 and -2 connections will simply remain unused. This makes them perfect for most full-range speaker applications.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between 2-pole and 4-pole Speakon connectors?\u003c\/h3\u003e\n\u003cp\u003e2-pole connectors like these provide one pair of connections (+1\/-1), suitable for full-range speakers, monitors, and single-driver applications. 4-pole connectors add a second pair (+2\/-2), typically used for bi-amped systems where you need separate connections for woofers and tweeters from different amplifier channels.\u003c\/p\u003e\n\u003ch3\u003eHow do I wire these for standard speaker connections?\u003c\/h3\u003e\n\u003cp\u003eConnect your positive speaker wire to the +1 terminal and negative to the -1 terminal. The terminals accept bare wire, spade lugs, or ring terminals. Make sure connections are tight and properly insulated. These work with any speaker impedance from 2 ohms to 16 ohms.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411376008,"sku":"SAPT223-5Pack","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt-223_5pack_1000_535fb827-e528-43e3-999f-06ffe788e29a.jpg?v=1765560109"},{"product_id":"panel-mount-connector-1-4-inch-female","title":"SAPT224 - 1\/4\" Mono Female Chassis Mount Connector - 2 Conductor","description":"\u003cp\u003eThe SAPT224 chassis mount connector is built for techs, installers, and venue operators who need reliable 1\/4\" female panel connections for their sound systems. This connector handles repairs, permanent installations, and custom builds where you need professional-grade panel mounting capability.\u003c\/p\u003e\n\u003cp\u003eThis 2-conductor connector provides a secure female 1\/4\" connection that mounts directly through equipment panels, rack cases, or speaker cabinets. The solder termination design ensures solid electrical connections that won't fail under regular use, making it ideal for both temporary repairs and permanent installations.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated contacts resist corrosion and maintain clean signal transfer over time. The chassis mount design creates a sturdy through-panel connection that can handle repeated cable insertions without loosening. Two-conductor wiring accommodates standard mono applications including instrument inputs, monitor sends, and line connections.\u003c\/p\u003e\n\u003cp\u003ePerfect for repairing damaged panel jacks on mixing boards, amplifiers, and speaker cabinets. Installers use these for custom rack builds, permanent venue installations, and stage box assemblies. Mobile DJs and bands keep them on hand for emergency repairs when existing panel connections fail mid-show.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills to connect your audio cable to the two solder terminals. The connector mounts through a standard 1\/4\" panel hole with the included hardware securing it from behind.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs every connector with a one-year warranty. Professional-grade construction at a price that makes sense for keeping spares in your toolkit.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT224\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1\/4\" Female Chassis Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTermination\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSolder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel repairs, custom installations, emergency spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat type of cables work with this chassis mount connector?\u003c\/h3\u003e\n\u003cp\u003eThis connector accepts standard 1\/4\" mono plugs including TS (tip-sleeve) instrument cables and speaker cables. The 2-conductor design works with any mono application like guitar inputs, monitor outputs, or line connections. You'll need to solder your cable directly to the connector's two terminals.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for both instrument and speaker level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, this connector handles both instrument level and speaker level signals since it's a passive connection point. The nickel-plated contacts and solid construction can handle the current demands of speaker connections as well as the precision needed for instrument signals.\u003c\/p\u003e\n\u003ch3\u003eWhat tools do I need to install this connector?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a soldering iron, solder, and basic hand tools to mount the connector through your panel. The connector requires a standard 1\/4\" hole in your equipment panel or rack case. Basic soldering skills are necessary to connect your cable to the two solder terminals.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to a plastic chassis mount connector?\u003c\/h3\u003e\n\u003cp\u003eThis metal construction with nickel plating offers better durability and signal integrity than plastic alternatives. The metal housing provides better shielding and the nickel-plated contacts resist corrosion better than standard metal contacts, making it suitable for professional applications.\u003c\/p\u003e\n\u003ch3\u003eWill this fit standard rack equipment and mixer panels?\u003c\/h3\u003e\n\u003cp\u003eYes, this uses the standard 1\/4\" mounting hole size found on most professional audio equipment. It mounts flush with your panel and the hardware secures it from behind, making it compatible with mixing boards, rack gear, and speaker cabinets that use standard 1\/4\" panel jacks.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411377288,"sku":"SAPT224","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt224_1000_24ec2677-7175-48a1-a03c-e1b77d00b44d.jpg?v=1765561482"},{"product_id":"panel-mount-connector-4-pole-speakon","title":"SAPT228 - 4 Pole Speakon Panel Connector","description":"\u003cp\u003eThe SAPT228 4-pole Speakon panel connector is built for sound engineers, venue techs, and mobile performers who need reliable panel-mount connections for their PA systems. This professional-grade connector handles the permanent installation and replacement needs of live sound setups.\u003c\/p\u003e\n\u003cp\u003eThis panel mount connector provides secure, locking Speakon connections directly through your speaker cabinets, rack panels, or stage boxes. The metal latch mechanism ensures cables stay connected during performances, while the 4-pole design supports both high and low frequency signals in bi-amped systems.\u003c\/p\u003e\n\u003cp\u003eThe connector features 30-amp rated contacts that handle high-power amplifier signals without degradation. It fits standard \"G\" series hole patterns, making it a direct replacement for worn or damaged panel connectors in existing gear. The robust metal construction withstands the rigors of touring and permanent installations.\u003c\/p\u003e\n\u003cp\u003eUse this connector when building custom speaker cabinets, upgrading older PA gear with worn connectors, or installing permanent sound systems in churches and venues. It's also essential for mobile DJs and bands who need to repair or modify their speaker setups on the road.\u003c\/p\u003e\n\u003cp\u003eThe panel mount design requires access to both sides of the mounting surface for installation. Standard Speakon cables connect directly to the front-facing connector.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this connector with a one-year warranty, and it ships ready to install in your professional audio system.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT228\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e4 Pole Speakon Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e30 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard \"G\" Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLatch Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1x 4 Pole Speakon Panel Mount Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSpeaker cabinets, rack panels, stage boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between 4-pole and 2-pole Speakon connectors?\u003c\/h3\u003e\n\u003cp\u003eA 4-pole Speakon connector has four contact points instead of two, allowing it to carry separate high and low frequency signals for bi-amped speaker systems. If you're running full-range speakers or passive systems, you'll typically only use two of the four poles, but having the extra connections gives you flexibility for future upgrades or different wiring configurations.\u003c\/p\u003e\n\u003ch3\u003eWill this connector fit my existing speaker cabinet holes?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT228 uses the standard \"G\" series hole pattern that's common in professional audio equipment. This makes it compatible with most existing PA speakers, monitor wedges, and subwoofers that already have Speakon panel mounts. You'll need access to both sides of the cabinet for proper installation.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for high-powered amplifiers?\u003c\/h3\u003e\n\u003cp\u003eYes, the contacts are rated for 30 amps, which handles the output from most professional power amplifiers without issues. This rating covers everything from small club PA systems up to large venue installations, making it suitable for both mobile performers and permanent sound system installations.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to install this panel mount connector?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic tools like a drill for the mounting holes and a screwdriver. The connector mounts from behind the panel with screws, so you'll need access to the back side of whatever you're mounting it to. Standard Speakon cables plug directly into the front once installed.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to XLR panel connectors for speakers?\u003c\/h3\u003e\n\u003cp\u003eSpeakon connectors are specifically designed for speaker connections and handle higher current loads than XLR connectors. They also feature a locking mechanism that prevents accidental disconnection during performances. Most modern professional PA systems use Speakon connections between amplifiers and speakers for these safety and reliability advantages.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411378120,"sku":"SAPT228","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt228_1000.jpg?v=1765561483"},{"product_id":"xlr-female-pcb-panel-mount-connector","title":"SAPT229 - 3 Pole XLR Female Vertical PCB Mount Connector - Black","description":"\u003cp\u003eThe SAPT229 3-pole XLR female connector is designed for audio technicians and DIY builders working on PCB-mounted audio equipment repairs and custom builds. This vertical-mount connector provides a professional solution for replacing damaged XLR inputs and outputs on powered speakers, mixing boards, and other pro audio gear.\u003c\/p\u003e\n\u003cp\u003eThis connector handles standard balanced audio signals through its 3-pole configuration, delivering reliable signal transfer for microphone and line-level connections. The vertical PCB mount design allows for direct soldering to circuit boards, making it ideal for internal component replacement rather than panel mounting.\u003c\/p\u003e\n\u003cp\u003eThe SAPT229 follows Series D hole pattern specifications, ensuring compatibility with most professional audio equipment that uses standard XLR mounting holes. Its durable construction withstands repeated connection cycles while maintaining solid electrical contact. The black finish matches most professional audio equipment aesthetics.\u003c\/p\u003e\n\u003cp\u003eThis connector works well for repairing powered PA speakers, active monitors, mixing consoles, and audio interfaces where the original XLR jack has failed. It's also suitable for custom audio projects requiring internal XLR connectivity. The vertical orientation makes it perfect for tight spaces inside equipment chassis where horizontal connectors won't fit.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills to attach the three connection points to your PCB traces. The connector mounts securely through standard XLR panel holes from the front or rear of the chassis.\u003c\/p\u003e\n\u003cp\u003eEach SAPT229 comes with Seismic Audio's one-year warranty and ships quickly to get your audio equipment back in service.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT229\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 Pole XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMount Style\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eVertical PCB Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Options\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFront or Rear Panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePCB Board Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1 Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePCB repairs, powered speaker maintenance, custom builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat type of audio equipment uses vertical PCB mount XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eVertical PCB mount XLR connectors are commonly found in powered PA speakers, active studio monitors, mixing consoles, and audio interfaces where the XLR jack connects directly to the internal circuit board. These are different from standard panel-mount connectors that use separate wiring harnesses.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector to replace a panel-mount XLR jack?\u003c\/h3\u003e\n\u003cp\u003eNo, this connector is specifically designed for PCB applications where it solders directly to circuit board traces. For standard panel mounting with wire connections, you would need a different style XLR connector with solder lugs or screw terminals instead of PCB pins.\u003c\/p\u003e\n\u003ch3\u003eWhat soldering skills do I need to install this connector?\u003c\/h3\u003e\n\u003cp\u003eYou'll need basic through-hole soldering experience to attach the three connection pins to your PCB. The installation involves desoldering the old connector and soldering the new one in place, which requires a temperature-controlled soldering iron and desoldering tools for clean removal.\u003c\/p\u003e\n\u003ch3\u003eWill this fit the XLR hole in my powered speaker cabinet?\u003c\/h3\u003e\n\u003cp\u003eYes, this connector uses the standard Series D hole pattern that fits most professional audio equipment XLR panel cutouts. However, verify that your original connector was also PCB-mounted rather than panel-mounted before ordering, as the internal mounting requirements are different.\u003c\/p\u003e\n\u003ch3\u003eHow do I know if my equipment needs a vertical or horizontal PCB mount?\u003c\/h3\u003e\n\u003cp\u003eCheck how the original connector sits relative to your circuit board - if the pins go straight down into the PCB perpendicular to the panel, you need a vertical mount like the SAPT229. If the pins extend parallel to the panel surface, you'd need a horizontal mount connector instead.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411379784,"sku":"SAPT229","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt229_front_1000.jpg?v=1765562668"},{"product_id":"xlr-female-pcb-panel-mount-5-pack","title":"SAPT229 - 3 Pole XLR Female Vertical PCB Mount Connector - Black (5 Pack)","description":"\u003cp\u003eEssential replacement connectors for audio engineers and technicians repairing powered speakers, mixing consoles, and other PCB-based pro audio equipment. The SAPT229 provides reliable XLR female connections for circuit board applications where standard panel mounts won't work.\u003c\/p\u003e\n\u003cp\u003eThese vertical PCB mount connectors deliver secure 3-pole XLR connections directly to your circuit board, eliminating the need for additional wiring between panel and PCB. The vertical orientation saves space in compact enclosures while maintaining proper signal integrity for balanced audio connections.\u003c\/p\u003e\n\u003cp\u003eBuilt to fit standard Series D hole patterns, these connectors feature durable construction designed for the demands of professional audio repair and manufacturing. The black finish matches most professional audio equipment aesthetics. Each connector uses standard 3-pole wiring configuration compatible with all balanced microphone and line-level signals.\u003c\/p\u003e\n\u003cp\u003ePerfect for repairing damaged inputs and outputs on powered PA speakers, active monitors, mixing boards, and audio interfaces. Also suitable for custom audio equipment builds and prototype development where direct PCB connection is required. Front or rear mounting capability provides installation flexibility in tight enclosures.\u003c\/p\u003e\n\u003cp\u003eEach 5-pack includes five XLR female receptacles ready for PCB soldering applications. No additional mounting hardware required - these mount directly to your circuit board. Professional-grade connectors built for reliable long-term performance in demanding audio environments.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty and fast shipping. Professional repair quality at a price that makes sense for shops and engineers who need reliable replacement parts.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT229 (5 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 Pole XLR Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMount Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eVertical PCB Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Options\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFront or Rear Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePCB Board Replacement\/Repair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable Professional Grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePCB audio equipment repair and custom builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat equipment can I repair with these XLR connectors?\u003c\/h3\u003e\n\u003cp\u003eThese PCB mount connectors are designed for repairing powered speakers, active monitors, mixing consoles, audio interfaces, and any pro audio equipment where the XLR connector mounts directly to a circuit board. They work for both input and output applications on equipment that uses vertical PCB mounting rather than traditional panel mounting.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors work with standard microphone and line cables?\u003c\/h3\u003e\n\u003cp\u003eYes, these are standard 3-pole XLR female connectors that accept any balanced microphone cable, line cable, or speaker cable with male XLR connectors. The electrical specifications match industry standards, so they're compatible with all professional audio cables and equipment that use XLR connections.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for front panel or rear panel mounting?\u003c\/h3\u003e\n\u003cp\u003eThese connectors support both front and rear mounting configurations, giving you flexibility based on your equipment's design. However, they are specifically engineered for direct PCB mounting applications only - they won't work as traditional panel mount connectors that attach to metal chassis without a circuit board.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and regular XLR panel mounts?\u003c\/h3\u003e\n\u003cp\u003eRegular panel mounts attach to metal chassis and require separate wiring to reach the circuit board. These vertical PCB mounts solder directly to your circuit board, eliminating extra wiring and providing a more compact, reliable connection. They're specifically designed for equipment where space is limited and direct board connection is preferred.\u003c\/p\u003e\n\u003ch3\u003eHow many connectors do I need for a typical speaker repair?\u003c\/h3\u003e\n\u003cp\u003eMost powered speakers have one or two XLR inputs, so a single 5-pack provides enough connectors for multiple repairs. Active monitors typically need one connector, while larger PA speakers or mixing equipment might need two or more. Having extras on hand is useful since these connectors can fail from repeated plugging\/unplugging or electrical damage.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380040,"sku":"SAPT229-5Pack","price":35.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt229_5pk_1000.jpg?v=1765562664"},{"product_id":"cable-connector-mono-ts-1-4-inch","title":"SAPT23 - 1\/4\" Mono Nickel Connectors","description":"\u003cp\u003eThe SAPT23 mono 1\/4\" TS connector is built for musicians, sound engineers, and audio technicians who need reliable cable repair and custom wiring solutions. Whether you're fixing a damaged instrument cable backstage or building custom patch cables for your studio, this nickel-plated connector delivers the durability you need.\u003c\/p\u003e\n\u003cp\u003eThis mono TS (tip-sleeve) connector handles unbalanced audio signals from instruments, amplifiers, and line-level sources. The nickel plating resists corrosion and provides solid electrical contact, ensuring your signal stays strong over time. The robust construction withstands repeated plugging and unplugging without degrading connection quality.\u003c\/p\u003e\n\u003cp\u003eThe 1\/4\" TS format is the standard for electric guitars, bass guitars, synthesizers, and most instrument-level connections. This connector works with standard two-conductor cable for mono applications, making it perfect for instrument cables, speaker cables, and patch cables. The design accommodates wire gauges typically used in professional audio applications.\u003c\/p\u003e\n\u003cp\u003eEssential for guitar techs maintaining stage rigs, studio engineers building custom cables, and mobile DJs who need quick field repairs. Keep several in your cable bag for emergency fixes during live performances, or use them to build exactly the cable lengths you need for your specific setup.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills and standard audio cable. The connector accepts standard instrument cable and provides strain relief for long-term reliability. Seismic Audio backs this connector with a one-year warranty and ships fast to keep your audio projects moving.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMono 1\/4\" TS (Tip-Sleeve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Compatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStandard two-conductor audio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eUnbalanced mono audio signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eInstrument cables, patch cables, speaker connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between mono TS and stereo TRS connectors?\u003c\/h3\u003e\n\u003cp\u003eMono TS (tip-sleeve) connectors like the SAPT23 have two contact points and carry unbalanced mono signals, making them perfect for electric guitars, bass guitars, and most instrument connections. Stereo TRS (tip-ring-sleeve) connectors have three contact points for balanced signals or stereo applications. Most electric instruments use mono TS connections.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for both instrument and speaker cables?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT23 works for both applications since it's a standard 1\/4\" TS connector. However, use appropriate cable gauge for each application - lighter gauge instrument cable for guitars and keyboards, heavier gauge speaker cable for amplifier-to-speaker connections. The connector itself handles both signal levels.\u003c\/p\u003e\n\u003ch3\u003eWhat soldering skills do I need to install this connector?\u003c\/h3\u003e\n\u003cp\u003eBasic soldering experience is sufficient for most users. You'll need to solder the hot signal wire to the tip terminal and the ground wire to the sleeve terminal. The connector provides clear solder points and strain relief. If you're new to soldering, practice on scrap wire first or have an experienced technician handle the installation.\u003c\/p\u003e\n\u003ch3\u003eHow does the nickel plating compare to other connector finishes?\u003c\/h3\u003e\n\u003cp\u003eNickel plating offers better corrosion resistance than standard metal finishes while remaining cost-effective compared to gold plating. It provides reliable electrical contact and durability for most professional audio applications. Gold plating offers slightly better conductivity but at significantly higher cost - nickel is the practical choice for most users.\u003c\/p\u003e\n\u003ch3\u003eWhat cable gauge works best with this connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT23 accommodates standard audio cable gauges from 20-16 AWG for instrument applications and up to 14-12 AWG for speaker connections. Use 20-18 AWG for instrument cables, 16-14 AWG for line-level patch cables, and 14-12 AWG for speaker cables. The strain relief works with various cable outer diameters within this range.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380168,"sku":"SAPT23","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt23_1000.jpg?v=1765560890"},{"product_id":"chassis-mount-connector-rca-female-10-pack","title":"SAPT230 - RCA Gold Plated Chassis Mount Connector - White","description":"\u003cp\u003eThe SAPT230 RCA chassis mount connector serves audio engineers, technicians, and DIY builders who need reliable panel-mount connections for mixing consoles, rack gear, and custom audio installations. This gold-plated female RCA connector handles both audio and video signals with dependable performance.\u003c\/p\u003e\n\u003cp\u003eBuilt with gold-plated contacts, this connector resists corrosion and maintains signal integrity over time. The white chassis finish integrates cleanly with professional rack equipment and mixing boards, while the robust construction withstands repeated plugging and unplugging in busy studio and live sound environments.\u003c\/p\u003e\n\u003cp\u003eThe chassis mount design allows secure installation through panels up to standard thickness, creating permanent connection points for patch bays, interfaces, and custom rack solutions. Gold plating on all contact surfaces ensures low-resistance connections that won't degrade signal quality, whether you're routing analog audio or composite video signals.\u003c\/p\u003e\n\u003cp\u003ePerfect for repair work on mixing consoles, building custom patch panels, or adding RCA connections to rack cases and equipment enclosures. Audio professionals use these for studio patchbays, while venues install them in wall plates and rack systems for permanent AV connections.\u003c\/p\u003e\n\u003cp\u003eInstallation requires a standard chassis punch or drill bit to create the mounting hole. The connector threads securely into place with the included mounting hardware, creating a professional-grade connection point that accepts any standard RCA cable.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty and ships fast from our warehouse. Professional-grade connectivity components built for the working musician and audio technician.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRCA Female Chassis Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGold Plated Contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAudio\/Video Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSingle RCA Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRack panels, mixing consoles, patch bays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size hole do I need to mount this RCA connector?\u003c\/h3\u003e\n\u003cp\u003eThis chassis mount RCA connector requires a standard 3\/8-inch (9.5mm) mounting hole. You can create this hole with a chassis punch, step drill bit, or standard drill bit followed by a reamer. The threaded body secures with the included mounting nut from behind the panel.\u003c\/p\u003e\n\u003ch3\u003eCan this connector handle both audio and video signals?\u003c\/h3\u003e\n\u003cp\u003eYes, this RCA connector works for both analog audio signals and composite video applications. The gold-plated contacts provide excellent signal transfer for line-level audio, instrument signals, and standard definition video connections. The connector maintains proper impedance characteristics for both signal types.\u003c\/p\u003e\n\u003ch3\u003eHow thick of a panel will this connector fit through?\u003c\/h3\u003e\n\u003cp\u003eThis chassis mount connector accommodates panel thicknesses from 1\/16-inch up to 1\/4-inch (1.5mm to 6mm). This covers standard rack panel thickness, mixing console faceplates, and most equipment enclosures. The threaded shaft provides secure mounting across this thickness range.\u003c\/p\u003e\n\u003ch3\u003eIs this connector compatible with all standard RCA cables?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. This female RCA connector accepts any standard male RCA plug, including both audio and video cables. The spring-loaded center pin maintains proper contact pressure, while the outer ground shell provides secure mechanical and electrical connection with any quality RCA cable.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between this and cheaper plastic RCA connectors?\u003c\/h3\u003e\n\u003cp\u003eThis metal chassis connector with gold plating offers superior durability and signal quality compared to plastic alternatives. The metal body provides better shielding, the gold plating prevents corrosion, and the robust construction handles professional use. Plastic connectors often fail at the mounting point under repeated cable insertion.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380232,"sku":"SAPT230","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt230_1000.jpg?v=1765560905"},{"product_id":"panel-mount-connector-rca-female-2-pack","title":"SAPT230 - RCA Gold Plated Chassis Mount Connector - White (10 Pack)","description":"\u003cp\u003eProfessional chassis mount RCA connectors built for audio engineers, integrators, and repair techs who need reliable panel-mount solutions for custom installations and equipment repairs. The SAPT230 10-pack delivers gold-plated female RCA connectors in clean white housing for professional rack panels, DJ mixers, and audio interface builds.\u003c\/p\u003e\n\u003cp\u003eThese chassis mount connectors provide secure panel integration with gold-plated contacts that resist corrosion and maintain signal integrity over years of use. The threaded barrel design locks firmly into standard panel cutouts, while the insulated rear terminals accept solder connections or wire wrapping for permanent installations.\u003c\/p\u003e\n\u003cp\u003eGold plating on all contact surfaces ensures optimal conductivity for both audio and composite video signals. The white thermoplastic housing matches standard rack equipment aesthetics and provides electrical isolation. Each connector features a standard RCA female jack that accepts any standard RCA male plug, with spring-loaded center pin contact for reliable connection retention.\u003c\/p\u003e\n\u003cp\u003eEssential for custom DJ booth installations, studio patch bay construction, and equipment repair shops. Perfect for building custom audio interfaces, repairing mixer input panels, or creating dedicated connection points in permanent installations. Also ideal for A\/V integrators working on conference room systems or educational facility upgrades.\u003c\/p\u003e\n\u003cp\u003eEach connector mounts through a standard 8mm panel hole with included hex nut for secure installation. Rear terminals accommodate 16-22 AWG wire for direct soldering or wire-wrap connections.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty with fast shipping nationwide. Professional-grade connectivity components that deliver reliable performance without the premium price tag.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e10 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRCA Female Chassis Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Color\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGold Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount\/Audio-Video\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom installations, equipment repair, panel building\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat panel hole size do these RCA connectors require?\u003c\/h3\u003e\n\u003cp\u003eThese chassis mount RCA connectors fit standard 8mm (approximately 5\/16\") panel holes. The threaded barrel extends through the panel and secures with the included hex nut from the rear. Most panel punch sets include the correct size punch for RCA connectors, or you can drill and file to size for one-off installations.\u003c\/p\u003e\n\u003ch3\u003eCan these connectors handle both audio and video signals?\u003c\/h3\u003e\n\u003cp\u003eYes, these gold-plated RCA connectors work equally well for audio and composite video applications. The gold plating provides excellent conductivity and corrosion resistance for both analog audio signals and standard definition video connections. They're commonly used in DJ mixers, audio patch bays, and A\/V distribution panels.\u003c\/p\u003e\n\u003ch3\u003eHow do I wire these connectors for permanent installation?\u003c\/h3\u003e\n\u003cp\u003eThe rear terminals accept direct solder connections for 16-22 AWG wire. The center pin terminal handles the hot\/positive signal, while the outer ground terminal connects to shield or negative. For temporary connections, the terminals also accommodate wire-wrap connections, though soldering provides the most reliable long-term connection.\u003c\/p\u003e\n\u003ch3\u003eAre these suitable for high-current applications like powered speaker connections?\u003c\/h3\u003e\n\u003cp\u003eNo, these are signal-level RCA connectors designed for line-level audio, instrument signals, and composite video. They're not rated for speaker-level signals or high-current applications. For powered connections, use appropriate XLR, 1\/4\" TRS, or speakon connectors rated for your amplifier's output.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and standard RCA jacks?\u003c\/h3\u003e\n\u003cp\u003eThese are chassis-mount connectors designed for permanent panel installation, while standard RCA jacks are typically PCB-mounted or cable-mounted. The threaded barrel and hex nut mounting system makes these ideal for custom rack panels, DJ booth installations, and equipment repairs where you need a secure panel-mount connection point.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380296,"sku":"SAPT230-10Pack","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt230_10pk_1000.jpg?v=1765561485"},{"product_id":"panel-mount-power-cable-receptacle","title":"SAPT230 - RCA Gold Plated Chassis Mount Connector - White (2 Pack)","description":"\u003cp\u003eProfessional audio technicians and installers need reliable RCA chassis mount connectors for custom builds, repairs, and permanent installations. These gold-plated female RCA panel mount connectors handle the demanding connection requirements of mixing consoles, outboard gear, and custom audio panels.\u003c\/p\u003e\n\u003cp\u003eEach connector features gold-plated contacts that resist corrosion and maintain consistent signal transfer over time. The white finish integrates cleanly with professional rack equipment and custom installations where appearance matters as much as performance.\u003c\/p\u003e\n\u003cp\u003eThese chassis mount connectors accept standard RCA male plugs from audio cables, creating secure panel connections for line-level audio signals. The threaded design locks firmly into panel cutouts, preventing loose connections during transport or heavy use. Gold plating on all contact surfaces reduces oxidation and ensures reliable connectivity in studio and live sound applications.\u003c\/p\u003e\n\u003cp\u003eInstall these connectors in custom mixer panels, equipment racks, or anywhere you need permanent RCA connections. They work equally well for DJ booth builds, studio patchbays, and church sound system installations. The two-pack provides enough connectors for stereo applications or gives you a spare for future projects.\u003c\/p\u003e\n\u003cp\u003eInstallation requires a standard panel cutout and mounting nut (included with each connector). Simply drill the appropriate hole size, insert the connector from the front panel, and secure with the included hardware.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these professional-grade connectors with a one-year warranty. Fast shipping gets your installation project back on track without delays.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePackage Quantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRCA Female Chassis Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContact Plating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eGold Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eColor\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSignal Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAudio\/Video Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Style\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eThreaded Chassis Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom panels, rack builds, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size hole do I need to cut for these RCA chassis mount connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors require a standard RCA panel mount hole size, typically 8mm or 5\/16 inch diameter. Check your specific panel thickness and connector threading to ensure proper fit. The included mounting hardware secures the connector from behind the panel.\u003c\/p\u003e\n\u003ch3\u003eCan these connectors handle both audio and video signals?\u003c\/h3\u003e\n\u003cp\u003eYes, these RCA chassis mount connectors work with both audio and video applications. The gold-plated contacts maintain signal integrity for line-level audio connections as well as composite video signals. However, they're most commonly used for audio applications in professional sound installations.\u003c\/p\u003e\n\u003ch3\u003eHow do these compare to cheaper plastic RCA panel mounts?\u003c\/h3\u003e\n\u003cp\u003eThese gold-plated metal connectors offer superior durability and signal integrity compared to plastic alternatives. The gold plating prevents corrosion and maintains consistent connections over thousands of plug\/unplug cycles. Professional installations benefit from the secure threading and robust construction that won't crack or wear out like plastic versions.\u003c\/p\u003e\n\u003ch3\u003eDo I need special cables to connect to these chassis mounts?\u003c\/h3\u003e\n\u003cp\u003eNo special cables required - these accept any standard RCA male connector. Use quality RCA-to-RCA cables, RCA-to-1\/4\" cables, or RCA-to-XLR adapters depending on your source and destination equipment. The gold-plated contacts work with any properly-sized RCA plug.\u003c\/p\u003e\n\u003ch3\u003eWhat's the best application for white-colored chassis mounts?\u003c\/h3\u003e\n\u003cp\u003eWhite chassis mounts integrate cleanly with white or light-colored equipment panels, custom DJ booths, and modern studio furniture. They're particularly popular for church sound installations and conference room AV systems where equipment needs to blend with room décor rather than stand out like traditional black connectors.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380360,"sku":"SAPT230-2Pack","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt230_2pk_1000.jpg?v=1765561492"},{"product_id":"5-pack-of-panel-mount-power-cable-receptacles","title":"SAPT231 - Panel Mount Power Cable Receptacle","description":"\u003cp\u003eThe SAPT231 panel mount power receptacle solves the connection challenges faced by touring musicians, venue techs, and anyone running professional audio equipment that needs frequent setup and teardown. This twist-lock connector eliminates the frustration of power cables falling out during critical moments.\u003c\/p\u003e\n\u003cp\u003eBuilt for 3-pole AC power applications, this receptacle handles 20 amps at 250 volts while providing secure line, neutral, and ground connections. The metal latch lock mechanism ensures cables stay connected even with vibration or movement, while the twist-lock design prevents accidental disconnection during performances.\u003c\/p\u003e\n\u003cp\u003eThe 20-amp capacity handles power-hungry equipment including large amplifiers, powered speakers, and lighting rigs. Three-conductor wiring supports standard AC power requirements, and the field-serviceable design means you can maintain these connectors on the road without specialized tools.\u003c\/p\u003e\n\u003cp\u003ePerfect for rack-mounted power distribution systems, custom flight cases, and permanent installations where reliable power connections matter. Venues running multiple amplifiers or DJ setups benefit from the professional appearance and secure connection that prevents costly equipment shutdowns mid-event.\u003c\/p\u003e\n\u003cp\u003eInstallation requires standard panel mounting techniques, and the connector accepts matching twist-lock power cables. The receptacle provides a clean, professional look while delivering the connection security that mobile sound reinforcement demands.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this connector with a one-year warranty, and it ships ready for immediate installation in your power distribution setup.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT231\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePower Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20 Amp \/ 250 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3-pole (Line, Neutral, Ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnection Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTwist-lock with metal latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable metal housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Style\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eServiceability\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eField serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSafety Notice\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDo not connect\/disconnect under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRack power systems, touring setups, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat equipment can this 20-amp receptacle power?\u003c\/h3\u003e\n\u003cp\u003eThis receptacle handles most professional audio amplifiers, powered speakers, and lighting equipment that draw up to 20 amps at 250 volts. It's suitable for power-hungry gear like large PA amplifiers, subwoofer amps, and multi-channel processing equipment. The 20-amp rating provides headroom for equipment with high inrush current during startup.\u003c\/p\u003e\n\u003ch3\u003eHow does the twist-lock mechanism work and why is it better than standard outlets?\u003c\/h3\u003e\n\u003cp\u003eThe twist-lock design requires you to insert the plug and rotate it to lock in place, creating a secure mechanical connection that won't pull out accidentally. This prevents power interruptions from cable movement, vibration, or accidental tugging that plague standard AC outlets in live sound applications. The metal latch provides additional security and tactile feedback when properly engaged.\u003c\/p\u003e\n\u003ch3\u003eCan I install this in a standard electrical panel or does it need special mounting?\u003c\/h3\u003e\n\u003cp\u003eThis is designed for panel mounting in custom enclosures, rack cases, or equipment housings, not standard electrical panels. You'll need to cut an appropriately sized hole in your panel and secure it with the included mounting hardware. It's commonly used in portable power distribution boxes, flight cases, and permanent installation racks.\u003c\/p\u003e\n\u003ch3\u003eWhat type of power cable do I need to connect to this receptacle?\u003c\/h3\u003e\n\u003cp\u003eYou need a matching 20-amp twist-lock power cable with the corresponding male connector. These cables are available separately and feature the same 3-conductor wiring (hot, neutral, ground) with the twist-lock plug that mates with this receptacle. Standard IEC or Edison plugs will not fit this connector.\u003c\/p\u003e\n\u003ch3\u003eIs this suitable for outdoor events or wet locations?\u003c\/h3\u003e\n\u003cp\u003eThis receptacle is designed for dry locations and standard indoor use. For outdoor events or wet locations, you'll need appropriate weatherproof enclosures and GFCI protection as required by electrical codes. The connector itself should be mounted in a protected enclosure when used in environments with moisture exposure.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380424,"sku":"SAPT231","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt231_1000.jpg?v=1765560379"},{"product_id":"locking-panel-mount-connector-1-4-inch-female","title":"SAPT231 - Panel Mount Power Cable Receptacle (5 Pack)","description":"\u003cp\u003eProfessional panel mount power receptacles designed for touring musicians, mobile DJs, and sound engineers who need secure AC power connections in flight cases, rack systems, and custom installations. These twist-lock connectors solve the common problem of power cables falling out during transport or performances.\u003c\/p\u003e\n\u003cp\u003eEach receptacle handles 20 amps at 250 volts with proper three-conductor wiring for line, neutral, and ground connections. The metal latch lock mechanism prevents accidental disconnection while ensuring safe engagement and disengagement when power is off.\u003c\/p\u003e\n\u003cp\u003eThe twist-lock design provides a secure mechanical connection that won't vibrate loose during transport or operation. Field-serviceable construction means you can replace contacts or repair connections on the road. Each connector features durable metal housing that withstands repeated use in demanding live sound environments.\u003c\/p\u003e\n\u003cp\u003ePerfect for custom rack power distribution systems, flight case power feeds, and permanent installations where reliable AC power connections are critical. Ideal for touring rigs, mobile DJ setups, church sound systems, and venue installations where equipment gets connected and disconnected frequently.\u003c\/p\u003e\n\u003cp\u003eInstallation requires standard electrical wiring skills and appropriate gauge wire for your application. Always disconnect power before making connections. Set of five connectors provides enough for multiple rack units or spare replacements.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty with fast shipping to get your power distribution project completed on schedule.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT231\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5-Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20 Amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e250 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Count\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 (Line, Neutral, Ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnection Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTwist Lock Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHousing Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eServiceability\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eField Serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSafety Feature\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMetal Latch Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRack power systems, flight cases, custom installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat applications are these panel mount receptacles best suited for?\u003c\/h3\u003e\n\u003cp\u003eThese receptacles excel in touring rack systems, flight case power distribution, mobile DJ setups, and permanent installations where equipment needs frequent connection and disconnection. The twist-lock design prevents cables from falling out during transport, making them ideal for any application where vibration or movement could cause standard connections to fail.\u003c\/p\u003e\n\u003ch3\u003eCan I install these receptacles myself or do I need an electrician?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic electrical wiring skills and knowledge of AC power safety. You'll need to properly wire the three conductors (line, neutral, ground) and ensure appropriate wire gauge for your current requirements. Always follow local electrical codes and consider consulting a qualified electrician for permanent installations or high-current applications.\u003c\/p\u003e\n\u003ch3\u003eHow do the twist-lock connectors prevent accidental disconnection?\u003c\/h3\u003e\n\u003cp\u003eThe metal latch lock mechanism requires a deliberate twist motion to engage and disengage the connection. Unlike standard connectors that can pull out easily, these stay locked until you intentionally rotate and release them. This prevents power interruption from cable tugs, vibration, or accidental contact during performances.\u003c\/p\u003e\n\u003ch3\u003eWhat wire gauge should I use with these 20-amp receptacles?\u003c\/h3\u003e\n\u003cp\u003eFor 20-amp applications, use 12 AWG wire minimum for line and neutral conductors, with appropriate ground wire per electrical code. Always verify your wire gauge matches your circuit breaker rating and follows local electrical codes. Undersized wire creates fire hazards and voltage drop issues that can damage connected equipment.\u003c\/p\u003e\n\u003ch3\u003eAre these compatible with standard AC power cables?\u003c\/h3\u003e\n\u003cp\u003eThese are panel mount receptacles that accept male twist-lock plugs, not standard AC power cables. You'll need cables with matching twist-lock male connectors, or you can wire standard AC outlets to the receptacle end. The 20-amp, 250-volt rating makes them suitable for professional audio equipment power requirements.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411380552,"sku":"SAPT231-5Pack","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt231_5pk_1000.jpg?v=1765561157"},{"product_id":"locking-panel-mount-connectors-5-pack","title":"SAPT233 - Locking 1\/4\" Female Panel Mount Connector - Nickel Plated 3 Pole","description":"\u003cp\u003eThe SAPT233 locking panel mount connector is essential for audio engineers, techs, and anyone maintaining PA systems, mixing consoles, or rack-mounted gear. When panel-mounted jacks fail during a show or installation, this connector gets you back up and running fast.\u003c\/p\u003e\n\u003cp\u003eThis 3-pole female 1\/4\" jack accepts both mono (TS) and stereo (TRS) plugs, making it versatile for line-level signals, headphone outputs, or auxiliary connections. The locking mechanism ensures secure connections that won't work loose from vibration or cable movement during performances.\u003c\/p\u003e\n\u003cp\u003eBuilt with nickel-plated contacts for reliable signal transfer and corrosion resistance, this connector fits standard Series D hole patterns found on most professional mixing boards and rack equipment. The 3-pole design handles balanced and unbalanced signals, supporting everything from instrument inputs to monitor sends.\u003c\/p\u003e\n\u003cp\u003ePerfect for replacing worn jacks on mixing consoles, repairing damaged panel connections on powered speakers, or building custom rack interfaces for venues and studios. Mobile DJs will appreciate having spares on hand for emergency repairs during events.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills and fits any equipment using the Series D mounting pattern. The connector ships ready to wire with clear terminal identification for tip, ring, and sleeve connections.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this connector with a one-year warranty and ships nationwide. Professional-grade components at accessible prices mean you can stock your toolkit without breaking the budget.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT233\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking 1\/4\" Female Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePole Configuration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 Pole (TRS\/TS Compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSeries D Hole Pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSignal Compatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMono and Stereo Plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount Connector Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWhat's in Box\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Locking 1\/4\" Female Panel Mount Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConsole repairs, rack equipment, custom installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between 3-pole and 2-pole panel mount connectors?\u003c\/h3\u003e\n\u003cp\u003eA 3-pole connector handles stereo (TRS) and mono (TS) plugs, with terminals for tip, ring, and sleeve connections. This makes it suitable for balanced line signals, stereo headphone outputs, or insert points on mixing consoles. A 2-pole connector only accepts mono plugs and handles unbalanced signals.\u003c\/p\u003e\n\u003ch3\u003eWill this connector fit my mixing board or rack equipment?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT233 uses the standard Series D hole pattern found on most professional audio equipment including mixing consoles, rack-mounted processors, and audio interfaces. Measure your existing connector's mounting hole to confirm compatibility before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat tools do I need to install this panel mount connector?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic soldering equipment and skills. You'll need a soldering iron, solder, wire strippers, and a screwdriver. The connector has clearly marked terminals for tip, ring, and sleeve connections, making wiring straightforward for anyone comfortable with basic electronics.\u003c\/p\u003e\n\u003ch3\u003eCan I use this connector for instrument-level signals?\u003c\/h3\u003e\n\u003cp\u003eYes, this connector works with both line-level and instrument-level signals. The nickel-plated contacts provide reliable signal transfer for guitars, keyboards, or other instruments plugging directly into mixing boards or rack equipment through 1\/4\" cables.\u003c\/p\u003e\n\u003ch3\u003eHow does the locking mechanism work on this connector?\u003c\/h3\u003e\n\u003cp\u003eThe locking mechanism engages when you insert a standard 1\/4\" plug and twist it slightly clockwise. This prevents the cable from pulling out accidentally during performances or in high-vibration environments. To disconnect, twist the plug counter-clockwise and pull straight out.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381128,"sku":"SAPT233","price":9.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt233_front_1000.jpg?v=1765561159"},{"product_id":"cable-connector-1-4-inch-male-ts","title":"SAPT233 - Locking 1\/4\" Female Panel Mount Connector - Nickel Plated 3 Pole (5 Pack)","description":"\u003cp\u003eProfessional audio technicians, venue installers, and DIY builders need reliable panel mount connectors for custom installations and equipment repairs. The SAPT233 locking 1\/4\" female panel mount connector provides secure connections for instrument inputs, monitor sends, and patch bay applications where vibration resistance matters.\u003c\/p\u003e\n\u003cp\u003eThis 3-pole nickel-plated connector accepts both mono (TS) and stereo (TRS) 1\/4\" plugs, making it versatile for line-level signals, instrument connections, and balanced audio applications. The locking mechanism prevents accidental disconnection during live performances or studio sessions.\u003c\/p\u003e\n\u003cp\u003eBuilt with nickel-plated contacts for corrosion resistance and reliable signal transfer, these connectors fit standard D-series hole patterns found in most rack equipment and custom panels. The 3-pole configuration handles tip, ring, and sleeve connections for stereo or balanced mono signals. Professional-grade construction ensures consistent performance in demanding environments.\u003c\/p\u003e\n\u003cp\u003eInstall these in guitar amp head panels, mixing console patch bays, or custom rack panels for venues, studios, and mobile rigs. They work well for churches upgrading older equipment or bands building custom pedalboard interfaces. Each connector mounts securely with the included hardware.\u003c\/p\u003e\n\u003cp\u003eThe 5-pack format provides spares for multiple installations or repairs. Standard D-series mounting pattern works with existing panel cutouts in most professional audio equipment.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty. Stock up for your next installation project or keep extras in your repair kit for reliable connections when you need them.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT233 (5 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLocking 1\/4\" Female Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e3 Pole (Tip, Ring, Sleeve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eD Series Hole Pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCompatibility\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMono (TS) and Stereo (TRS) Plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCustom panels, equipment repairs, rack installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between 2-pole and 3-pole panel mount connectors?\u003c\/h3\u003e\n\u003cp\u003e3-pole connectors like the SAPT233 handle tip, ring, and sleeve connections, making them compatible with both mono (TS) and stereo (TRS) plugs. 2-pole connectors only support mono signals. Choose 3-pole for maximum flexibility in professional audio applications.\u003c\/p\u003e\n\u003ch3\u003eWill these fit my existing rack equipment panel holes?\u003c\/h3\u003e\n\u003cp\u003eYes, these connectors use the standard D-series hole pattern found in most professional audio equipment. If your current 1\/4\" jacks are failing, these are likely direct replacements. The mounting hardware is included for secure installation.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for both instrument and line level signals?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. The 3-pole design works for instrument inputs, line-level connections, headphone outputs, and balanced audio signals. The nickel-plated contacts handle everything from guitar signals to mixer sends without signal degradation.\u003c\/p\u003e\n\u003ch3\u003eHow do the locking mechanisms work on these connectors?\u003c\/h3\u003e\n\u003cp\u003eThe locking feature engages when you fully insert a compatible locking 1\/4\" plug and twist slightly. This prevents accidental disconnection during performances or when cables get pulled. Standard non-locking plugs will still work but won't engage the locking mechanism.\u003c\/p\u003e\n\u003ch3\u003eWhy buy a 5-pack instead of individual connectors?\u003c\/h3\u003e\n\u003cp\u003ePanel mount repairs often reveal additional failing connectors, and having spares prevents project delays. The 5-pack also provides cost savings for multiple installations like patch bays, custom rack panels, or venue upgrades where you need several connectors.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381192,"sku":"SAPT233-5Pack","price":27.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt233_5pk_1000.jpg?v=1765560883"},{"product_id":"cable-connectors-1-4-inch-male-ts","title":"SAPT235 - 1\/4\" Male TS Cable Mount Connector","description":"\u003cp\u003eThe SAPT235 1\/4\" male TS cable mount connector is built for sound engineers, musicians, and technicians who need reliable connections for speaker cables and pro audio equipment. This cable mount connector handles the heavy-duty requirements of live sound applications where standard connectors fall short.\u003c\/p\u003e\n\u003cp\u003eThis TS (tip-sleeve) connector provides a secure, professional-grade connection point for unbalanced audio signals. The 2-pole wiring configuration makes it ideal for speaker cables, instrument connections, and patch bay applications where you need to terminate or repair cables on-site.\u003c\/p\u003e\n\u003cp\u003eThe SAPT235 features a larger shell design specifically engineered to accommodate thicker speaker cables that won't fit standard connectors. The oversized cable outlet reduces strain on the wire entry point, while the durable construction ensures reliable performance show after show. The robust build quality stands up to the constant plugging and unplugging that happens in live sound environments.\u003c\/p\u003e\n\u003cp\u003eUse this connector for emergency cable repairs during gigs, building custom speaker cables for your PA system, or creating patch cables for your studio setup. It's particularly valuable for mobile DJs and bands who need to modify or repair cables between venues.\u003c\/p\u003e\n\u003cp\u003eThe connector accepts standard 1\/4\" TS jack inputs and provides a secure solder connection for your cable wiring. You receive one SAPT235 connector ready for installation.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this connector with a one-year warranty and ships from our warehouse for reliable delivery to your next show.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1\/4\" Male TS Cable Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWiring\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShell Design\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLarger Shell for Speaker Cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Outlet\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOversized for Strain Relief\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable Metal Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePro Audio Equipment Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1 x 1\/4\" TS Male Cable Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, pro audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat type of cables can I use with the SAPT235 connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT235 is designed with a larger shell and oversized cable outlet specifically to accommodate thicker speaker cables that won't fit standard 1\/4\" connectors. It works with standard instrument cables, patch cables, and heavy-duty speaker wire up to 12 AWG. The generous cable entry point reduces strain and provides a more reliable connection for professional applications.\u003c\/p\u003e\n\u003ch3\u003eIs this connector balanced or unbalanced?\u003c\/h3\u003e\n\u003cp\u003eThis is an unbalanced TS (tip-sleeve) connector with 2-pole wiring, making it ideal for speaker connections, instrument outputs, and patch bay applications. If you need balanced connections for microphones or line-level signals, you'll want a TRS (tip-ring-sleeve) connector instead. The TS design is standard for connecting amplifiers to passive speakers.\u003c\/p\u003e\n\u003ch3\u003eCan I use this to repair a broken cable during a live show?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT235 is perfect for emergency cable repairs. Keep a few in your toolkit for quick fixes when a connector fails mid-show. You'll need basic soldering skills and a soldering iron to attach the wires, but the repair process is straightforward. The durable construction means your repair will hold up through the rest of your performance.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between this and a standard 1\/4\" connector?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT235 features a larger shell and oversized cable outlet compared to standard 1\/4\" connectors. This design accommodates thicker speaker cables and provides better strain relief at the wire entry point. Standard connectors often can't accept heavy-duty speaker wire or may create stress points that lead to cable failure over time.\u003c\/p\u003e\n\u003ch3\u003eDo I need any special tools to install this connector?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a soldering iron, solder, wire strippers, and basic hand tools to install the SAPT235. The connector uses standard solder cup terminals for secure wire attachment. No special crimping tools or exotic hardware required – just basic electronics repair skills that most audio technicians already have.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381256,"sku":"SAPT235","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt235_end1_1000.jpg?v=1765560894"},{"product_id":"2-pack-1-4-ts-male-cable-mount-connectors","title":"SAPT235 (2 Pack) - 1\/4\" Male TS Cable Mount Connectors","description":"\u003cp\u003eThe SAPT235 1\/4\" Male TS Cable Mount Connectors are essential repair and customization tools for musicians, sound engineers, and venue technicians who need reliable connection points for their pro audio cables. These larger-shell connectors accommodate the thicker gauge speaker cables used in live sound applications.\u003c\/p\u003e\n\u003cp\u003eEach connector features a robust 2-pole design that handles the signal demands of professional PA systems and stage monitors. The oversized shell design provides ample room for proper wire termination, while the larger cable outlet reduces strain on connections during setup and breakdown.\u003c\/p\u003e\n\u003cp\u003eBuilt with durable construction, these TS connectors use quality materials that maintain signal integrity over years of use. The male plug configuration works with standard 1\/4\" inputs found on amplifiers, mixers, and powered speakers. Professional-grade contacts ensure secure connections that won't fail during critical performances.\u003c\/p\u003e\n\u003cp\u003ePerfect for emergency repairs at venues, building custom speaker cables, or converting existing cables to different lengths. Sound engineers regularly keep these in their toolkit for quick fixes when standard cables don't reach or fail mid-show. These connectors handle everything from small club PA systems to larger venue installations.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills to attach your speaker wire to the internal terminals. The package includes two connectors, giving you a matched pair for stereo applications or backup units for your repair kit.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships them ready to install in your next cable project.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT235 (2 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1\/4\" Male TS Cable Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWiring\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShell Design\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLarger Shell for Speaker Cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Outlet\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLarger Cable Outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable Construction and Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnecting Pro Audio Equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e2 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom builds, emergency toolkit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat gauge speaker wire can these connectors accommodate?\u003c\/h3\u003e\n\u003cp\u003eThe SAPT235 connectors feature an oversized shell and larger cable outlet specifically designed to handle the thicker gauge speaker cables used in professional audio applications. The larger design provides ample room for proper wire termination and strain relief compared to standard 1\/4\" plugs.\u003c\/p\u003e\n\u003ch3\u003eDo I need soldering experience to install these connectors?\u003c\/h3\u003e\n\u003cp\u003eYes, these are cable mount connectors that require soldering your speaker wire to the internal terminals. You'll need basic soldering skills and tools to properly attach your wire to the connector. The larger shell design makes the soldering process easier by providing more working room.\u003c\/p\u003e\n\u003ch3\u003eCan I use these connectors to repair existing speaker cables?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely - these connectors are perfect for repairing damaged cable ends or converting cables to different lengths. Many sound engineers keep these in their repair kit for emergency fixes when existing cables fail during setup or performance.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between TS and TRS connectors?\u003c\/h3\u003e\n\u003cp\u003eTS (Tip-Sleeve) connectors like the SAPT235 have two poles and are designed for unbalanced signals, making them ideal for speaker connections between amplifiers and passive speakers. TRS (Tip-Ring-Sleeve) connectors have three poles for balanced signals or stereo applications.\u003c\/p\u003e\n\u003ch3\u003eHow many venues can I typically service with a 2-pack?\u003c\/h3\u003e\n\u003cp\u003eThe 2-pack provides enough connectors for one stereo repair or two separate mono cable fixes. For touring musicians or sound companies servicing multiple venues, consider stocking several 2-packs to handle emergency repairs across different systems and configurations.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381320,"sku":"SAPT235-2Pack","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt235_2pk_1000_fba1c451-b949-4a65-b6ee-ed7f0f0d360f.jpg?v=1765560101"},{"product_id":"5-pack-1-4-male-ts-cable-mount-connectors","title":"SAPT235 (5 Pack) - 1\/4\" Male TS Cable Mount Connectors","description":"\u003cp\u003eProfessional cable connectors are the unsung heroes of reliable live sound setups. The SAPT235 5-pack delivers quality 1\/4\" male TS cable mount connectors designed for musicians, DJs, and sound engineers who need dependable field repairs and custom cable builds.\u003c\/p\u003e\n\u003cp\u003eThese connectors handle the demanding task of terminating speaker cables and instrument connections in pro audio applications. The 2-pole TS configuration provides the standard unbalanced connection format used throughout the industry for speakers, amps, and line-level signals.\u003c\/p\u003e\n\u003cp\u003eBuilt with a larger shell design specifically engineered for thicker speaker cables, these connectors accommodate the heavier gauge wire needed for power applications. The oversized cable outlet reduces strain on connections while the durable construction withstands repeated plugging and unplugging during setup and teardown. Each connector weighs 0.08 lbs, reflecting the solid metal construction that ensures long-term reliability.\u003c\/p\u003e\n\u003cp\u003eWhether you're building custom speaker cables for your band's PA system, repairing damaged ends on existing cables, or stocking your repair kit for emergency fixes during live events, these connectors deliver professional-grade performance. They're essential for any mobile DJ setup, church sound system, or venue that needs to maintain and customize their audio connections.\u003c\/p\u003e\n\u003cp\u003eInstallation requires basic soldering skills to attach your cable to the connector terminals. Each 5-pack provides enough connectors for multiple repairs or complete cable builds.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and ships them ready to solve your connectivity challenges.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT235-5Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Pack of 1\/4 inch Male TS Speaker Cable Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1\/4 inch Male TS - 2 Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnecting Pro Audio Equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShell Design\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLarger shell to accommodate speaker cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Outlet\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOversized for strain relief\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e0.08 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDurable metal design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repairs, custom builds, mobile setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between TS and TRS connectors for live sound?\u003c\/h3\u003e\n\u003cp\u003eTS (Tip-Sleeve) connectors like these are 2-pole unbalanced connections used primarily for speaker cables connecting amplifiers to passive speakers, and for instrument cables like guitar leads. TRS (Tip-Ring-Sleeve) are 3-pole balanced connections used for microphones, line inputs, and headphones. For speaker connections in most PA systems, TS connectors are the standard choice.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to install these cable connectors?\u003c\/h3\u003e\n\u003cp\u003eYes, you'll need a soldering iron, solder, and basic hand tools. The installation process involves stripping your cable, tinning the wires, and soldering them to the connector's terminals. If you're not comfortable soldering, most music stores and audio repair shops can install these for a small fee.\u003c\/p\u003e\n\u003ch3\u003eCan these connectors handle high-power speaker applications?\u003c\/h3\u003e\n\u003cp\u003eThese connectors are designed with larger shells and cable outlets specifically to accommodate the thicker gauge speaker wire used in power applications. While the connector itself can handle significant current, your overall system's power capacity depends on your cable gauge, amplifier output, and speaker impedance matching.\u003c\/p\u003e\n\u003ch3\u003eHow many venues or gigs should I expect from one 5-pack?\u003c\/h3\u003e\n\u003cp\u003eA 5-pack typically covers multiple repair scenarios or one complete custom cable project. Mobile DJs often keep a pack in their repair kit for emergency fixes, while bands building their own speaker cables might use all five for a complete PA setup. Having spares prevents show-stopping cable failures.\u003c\/p\u003e\n\u003ch3\u003eAre these compatible with all 1\/4\" jacks on amps and speakers?\u003c\/h3\u003e\n\u003cp\u003eYes, these standard 1\/4\" TS male connectors fit all compatible female 1\/4\" jacks on amplifiers, powered speakers, and audio equipment. They work with both mono and stereo jacks, though they only carry an unbalanced signal due to their 2-pole TS design.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381384,"sku":"SAPT235-5Pack","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/SAPT235_5pk_1000_92c7244f-1dc4-4c16-8e08-84c30c13a6cc.jpg?v=1765560375"},{"product_id":"5-panel-mount-connectors-rca-female","title":"SAPT238 - RCA Female Panel Mount Connector - Red","description":"\u003cp\u003eThe SAPT238 RCA female panel mount connector serves technicians, venue engineers, and equipment builders who need reliable audio connections in permanent installations. This nickel-plated connector handles both audio and video signals through standard RCA connections.\u003c\/p\u003e\n\u003cp\u003eThis panel mount connector provides a secure, professional connection point that mounts flush through equipment panels, rack cases, or custom enclosures. The red isolation washer color-codes your connections while providing electrical isolation from the mounting surface.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated construction resists corrosion and maintains signal integrity over time. The connector fits standard D-series hole patterns, making it compatible with most professional audio equipment panels. The female RCA design accepts standard male RCA plugs from audio sources, mixers, or video equipment.\u003c\/p\u003e\n\u003cp\u003eUse this connector for custom rack builds, repair work on mixing consoles, or permanent installations in venues where you need accessible connection points. It's particularly useful for churches, studios, and mobile DJ setups where equipment gets connected and disconnected regularly.\u003c\/p\u003e\n\u003cp\u003eThe connector mounts through a single hole in your panel and secures with the included hardware. Standard RCA cables connect directly to the female jack. Each purchase includes one complete connector assembly with red washer and mounting hardware.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this connector with a one-year warranty. Professional-grade construction at a price that makes sense for both single repairs and bulk installations.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRCA Female Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIsolation Washer\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eD Series Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAudio\/Video Signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMounting Style\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePanel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eContents\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1 RCA Female Connector with Red Washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eEquipment repairs, custom rack builds, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat equipment can I use this RCA connector with?\u003c\/h3\u003e\n\u003cp\u003eThis panel mount connector works with any audio or video equipment that uses standard RCA connections. It's commonly used for repairing mixing boards, building custom rack panels, or creating connection points in permanent venue installations.\u003c\/p\u003e\n\u003ch3\u003eDoes this connector fit standard equipment panels?\u003c\/h3\u003e\n\u003cp\u003eYes, the SAPT238 uses a D-series hole pattern that's compatible with most professional audio equipment panels. It mounts through a single hole and secures with the included hardware for a flush, professional appearance.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between this and a regular RCA connector?\u003c\/h3\u003e\n\u003cp\u003eUnlike standard RCA connectors that attach to cables, this is a panel mount connector that installs permanently in equipment. It provides a female RCA jack that accepts standard male RCA plugs, making it ideal for creating accessible connection points.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for both audio and video signals?\u003c\/h3\u003e\n\u003cp\u003eYes, this RCA connector handles both audio and video signals. The nickel plating and quality construction maintain signal integrity for professional applications. The red washer helps with color-coding in multi-connector installations.\u003c\/p\u003e\n\u003ch3\u003eWhat comes included with this connector?\u003c\/h3\u003e\n\u003cp\u003eEach SAPT238 includes one complete RCA female panel mount connector with red isolation washer and mounting hardware. You'll need to provide your own RCA cables to connect to audio sources or destinations.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381448,"sku":"SAPT238","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt-238_side2_1000.jpg?v=1765560383"},{"product_id":"cable-connectors-mono-ts-1-4-inch","title":"SAPT238 (5 Pack) - RCA Female Panel Mount Connectors - Red","description":"\u003cp\u003eThese nickel-plated RCA female panel mount connectors are essential for audio engineers, electronics technicians, and DIY builders who need reliable replacement connectors for mixing consoles, audio interfaces, and custom rack equipment. Whether you're repairing vintage gear or building custom audio solutions, these connectors deliver the durability and signal integrity your projects demand.\u003c\/p\u003e\n\u003cp\u003eEach connector features nickel plating for corrosion resistance and optimal conductivity, ensuring clean audio and video signal transmission. The red isolation washers provide clear visual identification and prevent ground loops in complex installations. Built to fit standard D-series hole patterns, these connectors integrate seamlessly with professional audio equipment and custom enclosures.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated contacts resist oxidation and maintain low-resistance connections over time. The panel mount design creates secure, permanent installations that withstand repeated plugging and unplugging. Each connector accommodates standard RCA plugs and maintains proper impedance matching for audio and composite video applications.\u003c\/p\u003e\n\u003cp\u003ePerfect for recording studio patchbays, live sound mixing consoles, DJ booth installations, and custom audio equipment builds. These connectors handle everything from home studio monitor feeds to professional broadcast equipment repairs. Studio owners and live sound technicians rely on these for mission-critical repairs where downtime isn't an option.\u003c\/p\u003e\n\u003cp\u003eInstallation requires a standard chassis punch or drill for the mounting hole. Each connector threads securely from behind the panel with the included hardware. The 5-pack ensures you have spares on hand for future repairs or multi-connector installations.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty and fast shipping. Professional-grade components at a price that makes sense for shops and technicians who stock quality parts.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT238 (5 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRCA Female Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e5 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003ePlating\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIsolation Washer\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHole Pattern\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eD Series Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAudio\/Video Panel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStudio repairs, custom builds, equipment maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hole size do I need for these RCA panel mount connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors are designed for standard D-series hole patterns commonly found on professional audio equipment. They require a 3\/8-inch (9.5mm) mounting hole, which is the industry standard for RCA panel mount connectors. The threaded barrel secures from behind the panel with the included hardware.\u003c\/p\u003e\n\u003ch3\u003eCan these connectors handle both audio and video signals?\u003c\/h3\u003e\n\u003cp\u003eYes, these RCA connectors work with both audio and composite video signals. The nickel plating and proper impedance characteristics make them suitable for line-level audio, instrument signals, and standard definition composite video applications. The red isolation washer helps with signal identification in multi-connector installations.\u003c\/p\u003e\n\u003ch3\u003eHow do these compare to cheap plastic RCA connectors?\u003c\/h3\u003e\n\u003cp\u003eThese nickel-plated metal connectors offer significantly better durability and signal integrity than plastic alternatives. The metal construction provides better shielding, the nickel plating resists corrosion, and the threaded mounting system creates a secure mechanical connection. They're built for professional applications where reliability matters more than initial cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between these and gold-plated connectors?\u003c\/h3\u003e\n\u003cp\u003eNickel plating provides excellent corrosion resistance and conductivity at a lower cost than gold plating. For most audio applications, nickel-plated connectors deliver professional performance without the premium price. Gold plating offers slightly better corrosion resistance in extreme environments but isn't necessary for typical studio and live sound applications.\u003c\/p\u003e\n\u003ch3\u003eDo these work with standard RCA cables and plugs?\u003c\/h3\u003e\n\u003cp\u003eYes, these female panel mount connectors accept any standard RCA male plug or cable. They maintain proper contact pressure and impedance matching with quality RCA cables. The internal spring contacts ensure reliable connection with both budget and high-end RCA plugs, making them versatile for any application.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381512,"sku":"SAPT238-5Pack","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt-238_5pack_1000.jpg?v=1765560895"},{"product_id":"chassis-mount-connector-rca-female","title":"SAPT23 (8 Pack) - 1\/4\" Mono Nickel Connectors","description":"\u003cp\u003eProfessional 1\/4\" TS mono cable connectors designed for musicians, audio engineers, and live sound technicians who need reliable connections for instruments, amplifiers, and PA systems. This 8-pack of SAPT23 connectors provides backup solutions for cable repairs and custom audio builds.\u003c\/p\u003e\n\u003cp\u003eEach connector features a durable nickel-plated construction that resists corrosion and maintains signal integrity over thousands of connections. The mono TS (tip-sleeve) configuration works with unbalanced audio signals from electric guitars, bass guitars, keyboards, and line-level equipment.\u003c\/p\u003e\n\u003cp\u003eThese connectors handle standard unbalanced audio signals and fit securely into 1\/4\" jacks on amplifiers, mixing boards, and effects pedals. The nickel plating ensures long-term durability in both studio and live performance environments where connectors see heavy use.\u003c\/p\u003e\n\u003cp\u003ePerfect for guitar technicians building custom pedalboard cables, live sound engineers keeping spare connectors for emergency repairs, and home studio owners creating custom patch cables. Churches, schools, and venues often stock these for quick fixes during services or events.\u003c\/p\u003e\n\u003cp\u003eEach connector requires standard audio cable to complete your custom builds. The package includes eight individual 1\/4\" TS male connectors ready for soldering to your choice of cable.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs these connectors with a one-year warranty against manufacturing defects. Ships fast so you can keep your audio setup running without delays.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSAPT23 (8 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e1\/4\" TS Male (Mono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTip-Sleeve (Unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNickel Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eQuantity\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e8 Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eUnbalanced Audio Signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCondition\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable repair, custom audio builds, studio patching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between TS and TRS connectors?\u003c\/h3\u003e\n\u003cp\u003eTS (tip-sleeve) connectors like the SAPT23 carry mono unbalanced signals, perfect for electric guitars, bass guitars, and line-level equipment. TRS (tip-ring-sleeve) connectors carry stereo or balanced signals. For most instrument and amplifier connections, TS mono connectors are the correct choice.\u003c\/p\u003e\n\u003ch3\u003eCan I use these connectors for microphone cables?\u003c\/h3\u003e\n\u003cp\u003eNo, these TS connectors are designed for unbalanced audio signals from instruments and line-level equipment. Microphones typically require XLR connectors or TRS connectors for balanced signals. Using unbalanced connectors for long microphone runs can introduce noise and signal degradation.\u003c\/p\u003e\n\u003ch3\u003eHow many venues worth of backup connectors does this pack provide?\u003c\/h3\u003e\n\u003cp\u003eAn 8-pack covers most emergency repair scenarios for small to medium venues up to 500 people. Professional sound companies often keep 10-15 spare connectors per major event, so this pack handles backup needs for smaller churches, clubs, and school auditoriums with room to spare.\u003c\/p\u003e\n\u003ch3\u003eWhat gauge cable works best with these connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors accommodate standard audio cable from 20 to 16 AWG. For most instrument and line-level applications, 20 or 18 AWG cable provides the right balance of flexibility and signal integrity. Thicker cables may require slight modification of the connector housing for proper fit.\u003c\/p\u003e\n\u003ch3\u003eDo these connectors work with active pickups and effects pedals?\u003c\/h3\u003e\n\u003cp\u003eYes, these TS connectors handle both passive and active instrument pickups as well as effects pedal connections. The nickel plating provides reliable contact for high-impedance instrument signals and line-level effects loops without signal degradation or connection noise.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411381576,"sku":"SAPT23-8Pack","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sapt23_8pk_1000_b5b3878f-979f-4d70-a6f4-be95c23a5de7.jpg?v=1765560903"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/collections\/Cable_Connectors_62e4ec19-914a-4fb1-9f01-04463b3d2847.jpg?v=1563419275","url":"https:\/\/www.seismicaudiospeakers.com\/collections\/cable-connectors\/power-cable.oembed","provider":"Seismic Audio","version":"1.0","type":"link"}