{"title":"Splitter Snake Cables","description":"\u003cp\u003eSeismic Audio offers 2 different kinds of Splitter Snake Cable, Standard and Rack Mountable! Splitter snake cables take the inputs from the stage and then, through a hardwired Y cable split, send identical signals to the two different fantails attached to the input box. There are many reasons this can be useful to the professional musician or sound engineer. The two most popular are live recording and monitor mixing. Both will work in a similar way, made possible by the Seismic Audio Speakers splitter snake cable. The input box will be placed on stage and all instruments plugged into it. One of the two fantails will be sent to the front-of-house mixing position, as usual. The second fantail gives you unique opportunities, however. One option is feeding an onstage monitor mixing board. This is how the big sound companies do it and now you can, too, at a fraction of the price. The other option is sending the second fantail to a recording device, whether it is a hard disk recorder or a computer recording interface. This will give you the full audio picture of what is happening on stage, unaffected by changes made to the sound at the front-of-house mixing position. That gives you full control over the sound of the live recording, making for an easier and better sounding session.\u003c\/p\u003e\r\n\u003cp\u003eSplitter snake cables from Seismic Audio Speakers are available in a variety of sizes to meet your band's needs. Splitter snakes are available in 16 channel, 24 Channel and 32 channel configurations. Each model comes with the option of two 15 foot trunks or a 15 foot and a 30 foot trunk. Splitter snake cables feature the basic Y splitter setup. Buy splitter snake cables for the best connection between the stage and the mixer.\u003c\/p\u003e\r\n\u003ch3\u003eSplitter Snake Cables\u003c\/h3\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/www.seismicaudiospeakers.com\/Splitter-Snake-Cables\/c\/552\/?facetValueFilter=Tenant~Snake-Cable-Type%3ASplitter_Cables\u0026amp;sortBy=price+desc\u0026amp;categoryId=552\"\u003e\u003c\/a\u003e Splitter snake cables from Seismic Audio Speakers are available in a variety of sizes to meet your band's needs. Splitter snakes are available from 16 channel to 32 channels. Splitter snake cables feature the basic Y splitter setup. Each pair of heavy duty conductors is individually shielded, producing crystal clear sound while rejecting extraneous noise. XLR connectors make it easy to attach the splitter snake cable to amps and mixers without additional converters. Buy splitter snake cables for the best connection between the stage and the mixer.\u003c\/p\u003e\r\n\u003ch3\u003eRack Mountable Splitter Snake Cables\u003c\/h3\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/www.seismicaudiospeakers.com\/Rack-Mountable-Splitter-Snakes\/c\/627\"\u003e\u003c\/a\u003e Rack Mountable Splitter Snake Cables have the Stage Box rack mountable for convenience and ease of transport. Both fantails are well labeled and grouped by color. Both the main trunk and split trunk are built with cable that is individually shielded pairs, 22 guage, high copper purity conductors with aluminum foil shield and trace wire. You will find strain relief at both the stage box and fantail end of the snake. There is a mesh hanger at the fantail end. The female XLR \/ 1\/4\" panel jacks on the box are locking coiled spring style with non metallic bodies. The fantail is built with male XLR shells.These snakes are your basic hardwired Y splitters. They each have a stage box and two hardwired short trunks with fantails. These splitter snake cables do not have splitter transformers, ground-lift switches, or multi-pin disconnects. These splitter cables are straight send snakes and do not have any returns. The cable ends on the fantails are all male XLR, while the stage box consists of all female XLR and 1\/4\" combo jacks. You can plug an XLR or a 1\/4\" in to the box end of the snake.\u003c\/p\u003e","products":[{"product_id":"16-channel-xlr-splitter-snake-cable-two-15-foot-trunks","title":"SATSS-16x1515 - 16 Channel Send XLR Splitter Snake Cable - two 15 foot trunks","description":"\u003cp\u003eThe SATSS-16x1515 splitter snake delivers professional-grade signal distribution for bands, venues, and sound engineers who need reliable multi-channel routing from stage to front-of-house. This hardwired Y-splitter configuration eliminates the need for additional equipment while maintaining signal integrity across all 16 channels.\u003c\/p\u003e\n\u003cp\u003eBuilt with individually shielded pairs and 22-gauge heavy-duty conductors, this snake cable prevents signal interference and maintains clean audio transmission across both 15-foot trunks. The aluminum foil shield with trace wire construction ensures professional-grade noise rejection, essential for live sound applications where signal quality directly impacts performance.\u003c\/p\u003e\n\u003cp\u003eThe heavy-duty steel stage box features clearly labeled female XLR inputs, while both fantails terminate in male XLR connectors with color-coded groupings for quick setup. Each connection point includes strain relief protection, and the stage box comes equipped with a carrying handle for easy transport. At 16 pounds total weight, this snake provides the durability needed for regular mobile use without excessive bulk.\u003c\/p\u003e\n\u003cp\u003ePerfect for splitting signals to front-of-house and monitor consoles, recording setups, or broadcast feeds in venues accommodating 200-500 people. The dual 15-foot trunk configuration works well for medium-sized stages where monitor and FOH positions require separate signal feeds from the same source.\u003c\/p\u003e\n\u003cp\u003eConnect microphones and instruments to the stage box, then run the two fantails to your mixing positions. All XLR connectors and stage box hardware come ready to use out of the box.\u003c\/p\u003e\n\u003cp\u003eBacked by Seismic Audio's one-year warranty with fast shipping. Professional-grade construction at a price point that makes sense for working musicians and sound technicians.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eChannels\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSend only (no returns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Length\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTwo 15-foot trunks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShielding\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e100% individually shielded pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShield Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAluminum foil with trace wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFemale XLR (button-less coiled spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFantail Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy-duty steel with handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e16 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAll connection points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLabeling\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage box and fantails clearly marked\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLive sound splitting, recording, broadcast feeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between a splitter snake and a regular snake cable?\u003c\/h3\u003e\n\u003cp\u003eA splitter snake like the SATSS-16x1515 takes one set of input signals and splits them to two destinations, while a regular snake simply carries signals from point A to point B. This model has one stage box with female XLR inputs and two separate 15-foot trunks with male XLR outputs, allowing you to send the same 16 channels to both your front-of-house console and monitor mixer simultaneously.\u003c\/p\u003e\n\u003ch3\u003eWhat size venues work best with 15-foot trunks?\u003c\/h3\u003e\n\u003cp\u003eThe dual 15-foot configuration works well for small to medium venues seating 200-500 people, where your stage box can sit center-stage and reach both FOH and monitor positions. For larger venues or permanent installations where longer runs are needed, consider our 25-foot or 50-foot trunk options instead.\u003c\/p\u003e\n\u003ch3\u003eDo I need any additional cables or adapters to use this snake?\u003c\/h3\u003e\n\u003cp\u003eNo additional cables are required - this is a complete hardwired system. Simply plug your microphones and instruments into the female XLR inputs on the stage box, then connect the male XLR outputs from each fantail directly to your mixing console inputs. The snake comes with all connectors permanently attached and ready to use.\u003c\/p\u003e\n\u003ch3\u003eCan I use this snake for recording studio applications?\u003c\/h3\u003e\n\u003cp\u003eYes, this splitter snake works well for recording setups where you need to send the same signal sources to multiple destinations, such as splitting between your main recording interface and a separate monitor mix or backup recorder. The individually shielded construction maintains studio-quality signal integrity across all channels.\u003c\/p\u003e\n\u003ch3\u003eHow does the strain relief protect my investment?\u003c\/h3\u003e\n\u003cp\u003eEach XLR connector features heavy-duty strain relief that prevents cable damage at the most vulnerable connection points. Combined with the steel stage box construction and quality XLR connectors, this protection extends cable life significantly compared to budget alternatives, especially important for mobile applications where cables get regular handling and transport stress.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411518792,"sku":"SATSS-16x1515","price":269.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/satss-16x1515_1000.jpg?v=1765559933"},{"product_id":"16-channel-splitter-snake","title":"SATSS-16x1530 - 16 Channel Send XLR Splitter Snake Cable - 15 foot trunk and 30 foot trunk","description":"\u003cp\u003eThe SATSS-16x1530 splitter snake delivers reliable multi-channel signal distribution for live sound engineers, FOH mixers, and recording professionals who need to send audio from the stage to multiple destinations. This 16-channel send snake features dual trunk lengths—15 feet and 30 feet—giving you flexible positioning options for your mixing console and recording interface.\u003c\/p\u003e\n\u003cp\u003eThis hardwired Y-splitter configuration takes 16 input channels from your stage box and splits each signal to two separate outputs via the dual fantails. The system handles signal distribution without returns, making it ideal for sending stage signals to both your front-of-house mixer and a recording setup, or splitting feeds between multiple mixing positions.\u003c\/p\u003e\n\u003cp\u003eBuilt with 22-gauge heavy-duty conductors and 100% individually shielded pairs, the snake rejects noise while maintaining signal integrity across all 16 channels. The heavy-duty steel stage box includes clearly labeled female XLR inputs, while both fantails terminate in male XLR connectors with color-coded grouping for quick identification. Strain relief protectors at all connection points handle the demands of regular setup and breakdown.\u003c\/p\u003e\n\u003cp\u003eUse this splitter snake for medium to large venues where you need to distribute stage signals to multiple locations—perfect for festivals with both FOH and broadcast feeds, recording studios capturing live performances, or venues running separate monitor and main mixing consoles. The dual trunk lengths accommodate various stage and mixing booth configurations.\u003c\/p\u003e\n\u003cp\u003eConnect instruments and microphones to the stage box female XLR inputs, then run the 15-foot and 30-foot fantails to your desired mixing positions. Everything needed for operation comes hardwired and ready to use. Seismic Audio backs this snake with a one-year warranty and ships ready for immediate deployment.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eChannels\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSend only (no returns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Lengths\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e15 feet and 30 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShielding\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e100% individually shielded pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFemale XLR (button-less coiled spring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFantail Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy-duty steel with handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e20 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Construction\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHigh copper purity conductors with aluminum foil shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy-duty at all connection points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLabeling\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage box and fantails clearly labeled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLive sound splitting, recording feeds, dual mixing setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the 15-foot and 30-foot trunks?\u003c\/h3\u003e\n\u003cp\u003eBoth trunks carry the same 16 channels and terminate in identical male XLR fantails—the only difference is length. This gives you flexibility to position your mixing console and recording interface at different distances from the stage box. The 15-foot trunk works well for closer setups, while the 30-foot trunk reaches more distant mixing positions without requiring additional extension cables.\u003c\/p\u003e\n\u003ch3\u003eCan I use this snake to feed both my FOH mixer and a recording interface?\u003c\/h3\u003e\n\u003cp\u003eYes, that's exactly what this splitter snake is designed for. Connect your microphones and instruments to the stage box, then run one fantail to your front-of-house mixing console and the other to your recording interface or second mixer. Each input signal gets split to both outputs simultaneously, giving you independent control at each mixing position.\u003c\/p\u003e\n\u003ch3\u003eWhat size venues work best with this 16-channel snake?\u003c\/h3\u003e\n\u003cp\u003eThis snake handles medium to large venues accommodating 200-800 people, where you typically need 12-16 input channels for a full band setup. The dual trunk configuration works particularly well in venues where your mixing positions are at different distances from the stage, such as theaters, festival stages, or recording studios capturing live performances.\u003c\/p\u003e\n\u003ch3\u003eDo the fantails include all 16 XLR connectors, or do I need to buy them separately?\u003c\/h3\u003e\n\u003cp\u003eThe fantails come complete with all 16 male XLR connectors already terminated and ready to use. Both the 15-foot and 30-foot fantails include the full complement of labeled male XLR outputs, color-coded and grouped for easy identification. No additional connectors or assembly required—just plug into your mixers and start using.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to a snake with return channels?\u003c\/h3\u003e\n\u003cp\u003eThis is a send-only splitter snake, meaning it only carries signals from the stage box to your mixing positions—it doesn't include return channels for sending monitor mixes back to the stage. If you need monitor sends, you'll want a traditional snake with return channels. However, for applications like recording splits, broadcast feeds, or dual mixing console setups, the send-only configuration eliminates unused return channels while keeping the cable manageable.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411518856,"sku":"SATSS-16x1530","price":284.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/satss-16x1530_1000.jpg?v=1765559910"},{"product_id":"24-channel-xlr-splitter-snake-cable-two-15-foot-trunks","title":"SATSS-24x1515 - 24 Channel Send XLR Splitter Snake Cable - two 15 foot trunks","description":"\u003cp\u003eThe SATSS-24x1515 splitter snake cable is designed for live sound engineers and venue operators who need to split 24 channels from the stage to two separate mixing positions. This hardwired Y-splitter configuration delivers clean signal routing for monitor mixing, recording splits, or broadcast feeds without signal degradation.\u003c\/p\u003e\n\u003cp\u003eThis send-only snake splits each of the 24 input channels to duplicate outputs on two separate 15-foot trunks. The heavy-duty steel stage box handles all connections at the stage end, while two color-coded fantails provide organized access for your mixing consoles or recording interfaces.\u003c\/p\u003e\n\u003cp\u003eEach of the 24 channels features individual shielding around 22-gauge copper conductors, preventing crosstalk and maintaining signal integrity across long cable runs. The stage box uses female XLR panel jacks with coiled spring mechanisms, while both fantails terminate in male XLR connectors. At 23 pounds total, this snake provides professional-grade construction without excessive bulk.\u003c\/p\u003e\n\u003cp\u003eThis configuration works well for venues running both front-of-house and monitor mixing positions, recording studios capturing live performances, or broadcast setups requiring isolated feeds. The dual 15-foot trunks provide enough reach for most stage configurations while keeping cable management organized.\u003c\/p\u003e\n\u003cp\u003eAll connections are hardwired for reliability, and strain reliefs protect against connector failure at high-stress points. Each fantail includes a mesh hanger for organized storage when not in use.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this splitter snake with a one-year warranty and ships ready to use for your next show or installation.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSATSS-24x1515\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eChannels\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSend only (no returns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Length\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTwo 15-foot trunks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIndividually shielded pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFemale XLR panel jacks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFantail Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty steel with handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e23 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShielding\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAluminum foil with trace wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage box and fantail ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eDual console setups, recording splits, monitor feeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between this splitter snake and a regular snake cable?\u003c\/h3\u003e\n\u003cp\u003eThis is a send-only splitter snake that takes 24 input channels and duplicates each signal to two separate outputs. Unlike a standard snake that just extends your connections, this creates two identical signal paths from one source. You plug your microphones and instruments into the stage box, then connect both fantails to separate mixing consoles, recording interfaces, or monitor boards.\u003c\/p\u003e\n\u003ch3\u003eHow do I set up this splitter snake with two mixing consoles?\u003c\/h3\u003e\n\u003cp\u003eConnect your microphones and instruments to the female XLR inputs on the steel stage box. Then run each of the two 15-foot fantails to your mixing positions - one fantail goes to your front-of-house console, the other to your monitor console or recording interface. Each fantail carries all 24 channels, so both mixing positions receive identical signals from the stage.\u003c\/p\u003e\n\u003ch3\u003eWhat size venues work best with 15-foot trunks?\u003c\/h3\u003e\n\u003cp\u003eThe dual 15-foot trunks work well for small to medium venues where your mixing positions are within 15 feet of the stage. This includes club stages, church sanctuaries, school auditoriums, and corporate event spaces. For larger venues requiring longer cable runs, you'd need a different trunk length configuration.\u003c\/p\u003e\n\u003ch3\u003eCan I use this snake for recording while mixing live sound?\u003c\/h3\u003e\n\u003cp\u003eYes, this splitter configuration is ideal for simultaneous live mixing and recording. Connect one fantail to your live sound console and the other to your recording interface or multitrack recorder. Both receive the same clean signals from the stage without any isolation transformers or additional splitting required.\u003c\/p\u003e\n\u003ch3\u003eDo the individual channel shields really make a difference in sound quality?\u003c\/h3\u003e\n\u003cp\u003eThe individual shielding on each channel prevents crosstalk between adjacent channels and reduces electromagnetic interference from lighting systems and wireless devices. This becomes especially important in complex stage setups with multiple wireless systems, LED lighting, and high-gain microphone channels where noise rejection directly impacts your mix quality.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411518920,"sku":"SATSS-24x1515","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/satss-24x1515_1000.jpg?v=1765560008"},{"product_id":"24-channel-splitter-snake","title":"SATSS-24x1530 - 24 Channel Send XLR Splitter Snake Cable - 15 foot trunk and 30 foot trunk","description":"\u003cp\u003eThe SATSS-24x1530 splitter snake handles the complex routing demands of live sound engineers and FOH technicians running multiple mixing consoles or recording setups. This dual-trunk configuration lets you feed the same 24-channel signal to two different destinations simultaneously.\u003c\/p\u003e\n\u003cp\u003eBuilt around a heavy-duty steel stage box, this snake splits each of your 24 input channels into two identical outputs through hardwired Y connections. The 15-foot and 30-foot trunks give you the flexibility to reach both a front-of-house console and a monitor desk, or connect to recording interfaces at different distances from the stage.\u003c\/p\u003e\n\u003cp\u003eEach of the 24 channels uses 22-gauge conductors with individual shielding to maintain signal integrity across both splits. High-quality XLR connectors provide reliable connections, while heavy-duty strain reliefs protect the cable at stress points. The stage box features female XLR inputs, and both fantails terminate in male XLR connectors, clearly labeled and color-coded for fast setup.\u003c\/p\u003e\n\u003cp\u003ePerfect for live venues running separate FOH and monitor consoles, recording studios capturing live performances to multiple devices, or churches streaming services while mixing for the sanctuary. The dual-trunk design works well in venues up to 500 people where you need signal distribution without the complexity of active splitters.\u003c\/p\u003e\n\u003cp\u003eSetup connects directly between your microphones and mixing consoles - no additional power or cables required. The 28-pound steel construction handles the rigors of touring and permanent installations.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this splitter snake with a one-year warranty and fast shipping to get your multi-console setup running reliably.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSATSS-24x1530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eChannels\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSend only (no returns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Lengths\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e15 feet and 30 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eShielding\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIndividually shielded pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFemale XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFantail Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e28 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty at both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLabeling\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage box and fantails clearly labeled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHigh quality XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSplit Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHardwired Y splits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMulti-console live sound, recording splits, church streaming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the 15-foot and 30-foot trunks on this splitter?\u003c\/h3\u003e\n\u003cp\u003eBoth trunks carry identical signals from the same stage box inputs, giving you flexibility to reach mixing consoles at different distances. The 15-foot trunk typically connects to a nearby monitor console or recording interface, while the 30-foot trunk reaches a front-of-house position or streaming setup further from the stage.\u003c\/p\u003e\n\u003ch3\u003eCan I use this splitter snake for recording while running live sound?\u003c\/h3\u003e\n\u003cp\u003eYes, this is one of the most common applications. Connect your microphones to the stage box, then run one trunk to your live mixing console and the other to your recording interface or digital mixer. Both destinations receive identical signals without any signal loss or interference between outputs.\u003c\/p\u003e\n\u003ch3\u003eHow many people can this snake handle for live events?\u003c\/h3\u003e\n\u003cp\u003eThe 24-channel capacity works well for venues up to 500 people, supporting full band setups with 16-20 input channels plus room for additional microphones, DI boxes, or playback sources. The dual-trunk design is particularly valuable in larger venues where you're running separate FOH and monitor consoles.\u003c\/p\u003e\n\u003ch3\u003eDo I need any additional equipment to use this splitter snake?\u003c\/h3\u003e\n\u003cp\u003eNo additional power or electronics required - this is a passive hardwired splitter. Simply connect your microphones and instruments to the female XLR inputs on the steel stage box, then connect the male XLR outputs from each trunk to your mixing consoles or recording devices.\u003c\/p\u003e\n\u003ch3\u003eWill this splitter work with both dynamic and condenser microphones?\u003c\/h3\u003e\n\u003cp\u003eYes, but only for dynamic microphones and line-level sources. Since this is a passive splitter, it cannot provide phantom power to condenser microphones. If you need to split signals from condenser mics, you'll need phantom power from your mixing console and should consider an active splitter instead.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411518984,"sku":"SATSS-24x1530","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/satss-24x1530_1000.jpg?v=1765559996"},{"product_id":"32-channel-xlr-splitter-snake-cable-two-15-foot-trunks","title":"SATSS-32x1515 - 32 Channel Send XLR Splitter Snake Cable - two 15 foot trunks","description":"\u003cp\u003eThe SATSS-32x1515 splitter snake handles the critical connection between your stage and front-of-house mixer, delivering clean audio feeds to multiple destinations simultaneously. This hardwired Y-splitter design takes 32 input channels from your stage box and splits each signal to two separate 15-foot trunks, perfect for feeding both your main mixer and a monitor console.\u003c\/p\u003e\n\u003cp\u003eEach of the 32 channels features individually shielded pairs with 22-gauge heavy-duty conductors, ensuring signal integrity across all connections. The aluminum foil shielding with trace wire construction actively rejects interference and noise that can compromise your mix quality.\u003c\/p\u003e\n\u003cp\u003eThe heavy-duty steel stage box weighs 28 pounds and includes a carrying handle for reliable transport between gigs. Both 15-foot trunks terminate in clearly labeled fantails with color-coded groupings, while the stage box features female XLR inputs with button-less coiled spring connectors. All male XLR outputs use quality shells with heavy-duty strain reliefs at every connection point.\u003c\/p\u003e\n\u003cp\u003eThis configuration works well for live sound reinforcement in venues up to 500 people, recording studios running parallel feeds, or any installation requiring signal distribution without returns. The straight send design means audio flows one direction only – from stage box inputs to the two trunk outputs.\u003c\/p\u003e\n\u003cp\u003eConnect your microphones and instruments directly to the stage box female XLR inputs, then run the two trunks to your mixing positions. Everything needed for immediate deployment comes ready to use. Seismic Audio backs this splitter snake with a one-year warranty and fast shipping to get your signal chain running reliably.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eChannels\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSend only (no returns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Length\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTwo 15-foot trunks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIndividually shielded pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHigh copper purity with aluminum foil shield and trace wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFemale XLR (button-less coiled spring style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e28 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eAt stage box and fantail ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLabeling\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eClear labels on stage box and color-coded fantail groupings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLive sound, recording studios, permanent installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between a splitter snake and a regular snake cable?\u003c\/h3\u003e\n\u003cp\u003eA regular snake sends signals from stage to mixer and often includes return channels for monitor feeds. This splitter snake takes each input and splits it to two outputs, letting you send the same 32 channels to two different destinations simultaneously – like your main mixer and a recording interface, or FOH and monitor consoles.\u003c\/p\u003e\n\u003ch3\u003eHow many people can I cover with a 32-channel splitter snake?\u003c\/h3\u003e\n\u003cp\u003eThis 32-channel capacity handles most live sound applications from small clubs to mid-size venues up to 500 people. You'll have enough inputs for a full band setup including multiple vocals, drum kit, guitars, keyboards, and instruments, with channels to spare for audience mics or additional sources.\u003c\/p\u003e\n\u003ch3\u003eDo the 15-foot trunks give me enough reach for most venues?\u003c\/h3\u003e\n\u003cp\u003eThe dual 15-foot trunks work well when your mixing positions are relatively close to the stage. If you need longer runs to reach FOH or recording equipment, you can extend the connections using standard XLR cables. The 15-foot length keeps signal degradation minimal while providing flexibility for most club and small theater setups.\u003c\/p\u003e\n\u003ch3\u003eCan I use this splitter snake for recording while running live sound?\u003c\/h3\u003e\n\u003cp\u003eYes, this is a common application. Connect your stage inputs to the stage box, then run one trunk to your live sound mixer and the other to your recording interface or digital console. This gives you identical feeds for both live mixing and multitrack recording without any signal loss or interference between systems.\u003c\/p\u003e\n\u003ch3\u003eWhat happens if I need return channels for stage monitors?\u003c\/h3\u003e\n\u003cp\u003eThis splitter snake is send-only and doesn't include return channels. If you need monitor feeds, you'll want to pair this with a separate return snake, or consider a full snake cable system that includes both send and return channels. The split design here focuses specifically on distributing input signals to multiple mixing destinations.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411519048,"sku":"SATSS-32x1515","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sats-32x1515_up_ae2ce13e-62dd-421c-8890-ae2cf78682e0.jpg?v=1765560123"},{"product_id":"32-channel-splitter-snake","title":"SATSS-32x1530 - 32 Channel Send XLR Splitter Snake Cable - 15 foot trunk and 30 foot trunk","description":"\u003cp\u003eThe SATSS-32x1530 splitter snake delivers professional multi-channel audio distribution for live sound engineers, production companies, and venues running complex PA setups. This 32-channel send snake features dual trunk lengths (15-foot and 30-foot) from a single stage box, giving you flexible positioning options for monitor engineers and front-of-house mixers.\u003c\/p\u003e\n\u003cp\u003eBuilt around hardwired Y-splits, this snake takes 32 input channels at the stage box and splits each signal to two separate fantails without signal degradation. The heavy-duty steel stage box houses 32 female XLR inputs, while both fantails terminate in male XLR connectors for direct connection to mixing consoles or monitor boards.\u003c\/p\u003e\n\u003cp\u003eEach of the 32 channels uses individually shielded pairs with 22-gauge copper conductors, aluminum foil shielding, and trace wire construction to reject noise and maintain signal integrity across long cable runs. Both the stage box and color-coded fantails feature clear channel labeling for quick setup during load-in. Heavy-duty strain reliefs protect connection points from road wear, while the stage box includes a carrying handle for transport.\u003c\/p\u003e\n\u003cp\u003eThis configuration works well for festivals, theaters, and large venues where you need to split signals between front-of-house and monitor positions up to 30 feet from the stage. The dual trunk design eliminates the need for separate splitter boxes when running signals to two mixing positions. Connect instruments and microphones to the stage box, then run the 15-foot trunk to your monitor engineer and the 30-foot trunk to your main mixing position.\u003c\/p\u003e\n\u003cp\u003eSeismic Audio backs this splitter snake with a one-year warranty and ships it ready to use straight from the box.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:8px 12px;border-bottom:2px solid #ccc\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSATSS-32x1530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eChannels\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eSend only (no returns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eTrunk Lengths\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e15 feet and 30 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eIndividually shielded pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e22 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eConductor Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHigh copper purity with aluminum foil shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e32 female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eFantail Connectors\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eMale XLR on both fantails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStage Box Material\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty steel with handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003e28 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eStrain Relief\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eHeavy duty at stage box and fantail ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eOne Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eRecommended For\u003c\/td\u003e\n\u003ctd style=\"text-align:left;padding:8px 12px;border-bottom:1px solid #eee\"\u003eLarge venues, festivals, dual mixing positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the 15-foot and 30-foot trunks?\u003c\/h3\u003e\n\u003cp\u003eBoth trunks carry the same 32 channels from the stage box — this is a Y-split configuration where each input channel goes to both output fantails simultaneously. The 15-foot trunk typically goes to your monitor engineer position, while the 30-foot trunk reaches your front-of-house mixing console, giving you flexibility in mixer placement without needing separate splitter boxes.\u003c\/p\u003e\n\u003ch3\u003eCan I use this snake for recording applications?\u003c\/h3\u003e\n\u003cp\u003eThis snake is designed for live sound splitting, not recording interfaces. It splits analog XLR signals from the stage box to two mixing positions but doesn't convert to digital formats or connect directly to recording equipment. You'd connect this to analog mixing consoles that have XLR inputs.\u003c\/p\u003e\n\u003ch3\u003eWhat size venues work best with this 32-channel snake?\u003c\/h3\u003e\n\u003cp\u003eThis 32-channel configuration handles mid-size to large venues like theaters, festival stages, churches with full bands, and corporate events with extensive audio needs. The dual trunk design works particularly well when your monitor position is close to the stage (15-foot trunk) but your main mixing console is positioned further back in the venue (30-foot trunk).\u003c\/p\u003e\n\u003ch3\u003eDo the fantails come with any organization or are they just loose cables?\u003c\/h3\u003e\n\u003cp\u003eBoth fantails feature color-coded groupings and clear channel labeling for quick identification during setup. The cables include mesh hangers at the fantail end to help with organization. Each channel is numbered and grouped by color to match the corresponding inputs on the steel stage box.\u003c\/p\u003e\n\u003ch3\u003eIs this snake compatible with powered mixers and unpowered mixing consoles?\u003c\/h3\u003e\n\u003cp\u003eThis snake works with any mixing console or audio device that has standard XLR inputs, whether powered or unpowered. It's a passive splitter cable that doesn't require external power — it simply distributes the analog signals from your stage box inputs to both fantail outputs simultaneously.\u003c\/p\u003e","brand":"Seismic Audio","offers":[{"title":"Default Title","offer_id":28411519112,"sku":"SATSS-32x1530","price":434.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/files\/sats-32x1530_up.jpg?v=1765560118"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1577\/7605\/collections\/Splitter_Snake_Cables.jpg?v=1563422921","url":"https:\/\/www.seismicaudiospeakers.com\/collections\/splitter-snake-cables\/16-channel+30.oembed","provider":"Seismic Audio","version":"1.0","type":"link"}