">
">
">
10 Inch 500 Watt Car Audio Subwoofer Enclosure with RGB Lights Package with Amplifier & Cables
* Contents: 10 Inch 500 Watt Car Audio Subwoofer Enclosure with RGB Lights, Amp, & Cables
* One 10 Inch 500 Watt Car Audio Subwoofer Box with RGB Illumination
* One SA-1000.1LH - 1000 Watt Class D Monoblock Car Subwoofer Amplifier
* One 4 Gauge Car Audio Amplifier Installation Wiring Kit
-
Order by Phone
-
Free Same-Day Shipping
-
When will I Get my order?
When will I get my order?
We realize that you want your Pro Audio Equipment yesterday. Here at Seismic Audio Speakers, we aim to ship items out immediately. If you place your order before 2:30 Central time, we will ship your pro audio equipment on the very same business day.
Order today, and you'll receive your package on
-
![]()
Free Same-Day Shipping
-
![]()
1-year Warranty
-
![]()
30-Day Money-Back Guarantee
-
![]()
Satisfaction Guarantee
10 Inch 500 Watt Car Audio Subwoofer Enclosure with RGB Lights Package
Dual 10 Inch 1000 Watt Car Audio Subwoofer Enclosure with RGB Illumination
- Model: LightRage10
- 10 Inch 500 Watt Car Audio Subwoofer Box with RGB Illumination
- Power Rating: 500 Watts Max Power
- High Powered‚ 10 inch Woofer with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
- Rear Vented Design for Maximum Bass Output
- Voice Coil:‚ 2 inch 4 Layer Dual Voice Coil each woofer
- Impedance:‚ 4 Ohms‚ | Magnet: 40 Ounce each woofer
- Sensitivity:‚ 90 dB | Frequency Response: 35-600 Hz
- Binding Post Connectors | Remote Control for Lights Included
- Dimensions: 16" x 12"‚ x‚ 13.25" | Weight:‚ 28.7 lbs
1000 Watt Monoblock Class D Car Sub Amp
- Model: SA-1000.1LH - 1000 Watt Class D Monoblock Car Subwoofer Amplifier
- Power Ratings: 1 Ohm Mono: 1000 Watts | Total Musical Watts: 1300 Watts | Max Wattage: 1500 Watts
- Features: Gain Control | LPF and HPF Control | Mosfet Power Supply | Sub-Sonic Control | Bass Boost Control | Thermal Protection | LED Power and Protection Indicators | Low Input and High Input Selections
- Frequency Response: 10Hz - 25kHz (-3dB)
- Signal Noise Ratio: 90dB
- Input Impedance: 18k Ohm
- Input Sensitivity: 0.25-4.5V
- THD: <0.2%
- High Pass Frequency: 10Hz - 80Hz
- Low Pass Frequency: 80Hz - Full
- Bass Boost: 0/10dB
- Supply Voltage: 10~16VDC
- Dimensions: 7.75" x 9" x 2" | Weight: 4.27
4 Gauge Car Audio Amplifier Install Kit
- Model: SA-AMPWK4 - Amplifier Installation Kit | 2000 Watt Peak Power
- Contents: 18 Foot Blue 4 Ga Power Wire | 3 Foot Clear 4 Gauge Ground Wire | 18 Foot Dual RCA Interconnect Cable with 4 Ga Black Wire Loom | 18 Foot 12 Ga Silver Speaker Wire | 18 Foot Blue 18 Ga Remote Wire | ANL Fuse (250 Amp) and Inline Fuse Holder | Wire Connector Terminals
- CCA (Copper Clad Aluminum) | Gauge is set in international standards
- Highly Flexible wire jacket | Grade A1 Standard Tested
- Inline Fuse holder is water-resistant and heat tested
10 Inch 500 Watt Car Audio Subwoofer Enclosure with RGB Lights Package
The Seismic Audio Series of Car Audio Subwoofer Enclosures are built to give you the deep, chest-thumping, low-end bass you desire in your car audio system. This package offers a box with a pre-loaded 10" subwoofer, wired up and ready to go. Also included is a Class D Monoblock Amplifier to power your sub and a premium 4 gauge amplifier wiring kit to make installing the amplifier simple and easy.
Get rid of your stock-knock and prepare for hard-hitting bass, maximum bass response, punch, and additional sub-bass kick. The Seismic Audio car audio subwoofer enclosures are the last subs you will need. The LightRage10 is a 10 Inch subwoofer enclosure with RGB lighting, a max output of 500 watts, and a rear bass vent to supply that super low-end bass. High-Quality Construction and a smooth carpet finish allow this box to fit in with your existing system or replace your old one. With our series of Car Audio Subwoofers, you will turn heads, people will hear you coming and you may even break noise-ordinance rules.