 |
 |
 |
|
Our Backbone 10 mixer provides durable construction, low noise, and excellent sound quality at an amazingly low price. Staying true to the Seismic Audio mission, we have kept your budget in mind without compromising quality. The Seismic Audio Backbone has been designed to be the foundation of your recording or live sound mixing applications. If you are looking for a compact system solution with higher end performance, this is the mixer for you. Our Backbone mixers have a small footprint and are designed to provide the highest quality sound for all your audio projects while keeping you under budget. Whether you are a DJ, KJ (Karaoke Jockey), Church, School, or play Live Sound, these mixers will perform for your audio situation.
- Model: Backbone 10
- 10 Channel mixing console with two stereo channels
- Separate stereo RCA channel - Playback and Record
- Separate controls for mix and line inputs on all mono channels
- All MONO inputs accept XLR or 1/4" balanced /unbalanced
- Low noise, discrete mic pre-amplifiers on all XLR inputs
- Dedicated inserts on all MONO channels
- 3 Band EQ on all MONO channels, 2 band on stereo channels
- AUX and effects bus access on all channels
- High grade sealed potentiometers and 100mm faders.
- AUX send and EFF send controls in the main section for optimal level adjustment
- Headphones output with dedicated volume control
- Built in +48V phantom power
- Extremely rugged construction ensures long life even under the most demanding conditions
- 19" Wide x 17" Deep x 4" Tall
- Mono Input Channels
- XLR Input
- Line Input (1/4" TRS)
- Insert Point
- Gain
- Equalizer
- HF +/- 15db
- SWEPT MID +/- 15db
- LF +/- 15db
- Aux Sends
- PAN
- Mute
- Peak LED
- Solo
- Input Channel Fader
- Stereo Input Channels
- 1/4" TRS Inputs
- Gain
- Equalizer
- AUX Sends
- Balance
- Mute
- Peak LED
- Solo
- Fader
- Master Controls
- L/R XLR Outputs w/ Inserts
- RCA Playback In
- RCA Record Outputs
- Phantom Power
- Headphone Jack
- AUX Tape (Volume control for RCA in)
- Headphone Level
- Effects "Repeat" control
- AUX1 & AUX2 Out
- Effects (Return)
- Delay (time select)
- Bargraph Meters
- Master Faders
Specifications - Frequency Response
- Mic/Line Input to any Output: +/- 1dB 20Hz-20KHz
- THD
- Mic Sensitivity +30 dBu + 20 dBu @ all Outputs: <0.008%@1kHz
- Noise
- Mic input EIN: -128 dBu
- AUX and Mix Outputs: <-84dBu
- Crosstalk
- Channel Mute: <90dB 20Hz-10Hz <80dB 10K Hz-20K Hz
- Fader Cut-Off: <90dB 20Hz-10Hz <80dB 10K Hz-20K Hz
- Routing Isolation: <90dB 20Hz-10Hz <80dB 10K Hz-20K Hz
- Input and Output Impedance
- Microphone input: ~2K Ohms
- Mono Channel Line Input: >40K Ohms
- Stereo Input: >30K Ohm
- Stereo Returns: >10K Ohms
- Headphones Output: ~40K Ohms
- All Other Audio Output: 75 Ohms
- Input and Output Levels
- Microphone Input Maximum Level: +12 dBu
- Mono Channel Line Input Maximum Level: +38 dBu
- Stereo Input Maximum Level: +21 dBu
- Headphones Output (into 200 Ohms): 150mW
- All Other Audio Output: +21 dBu into 10K Ohms
- Filter
- HP: 100Hz, 18dB/octave
- HF: 12kHz, +/- 15dB
- MF: 240Hz-60kHz, +/- 15dB
- LF: 60Hz, +/- 15dB
- Brand New
- One Year Warranty
|
|
|
 |
|
 |
|
