The SATRXL-M2 Green 6-pack provides essential balanced connections for professional audio setups where you need to interface XLR and TRS gear. These 2-foot patch cables bridge the gap between mixers, equalizers, crossovers, compressors, and amplifiers that use different connector types.

Each cable delivers reliable balanced audio transmission from XLR male outputs to 1/4" TRS inputs, maintaining signal integrity across your rack-mounted processing chain. The compact 2-foot length keeps your rack organized while providing enough reach for standard 19" equipment spacing.

Built with 22-gauge oxygen-free copper conductors and comprehensive shielding, these cables maintain clean signal paths in electromagnetically noisy environments. Metal XLR connectors and 1/4" TRS plugs with fiberglass insulators ensure solid connections that won't work loose during transport or performance. The heavy-duty rubber jacket protects against wear while remaining flexible enough for tight routing behind equipment racks.

Perfect for connecting mixing consoles to outboard processors, routing signals between rack effects, or adapting PA system components with mismatched connector types. The bright green color coding helps identify signal paths quickly during setup and troubleshooting in dimly lit venues or equipment racks.

Six cables per pack give you enough connections for stereo processing chains or multiple mono signals. Everything you need for professional balanced audio connections, backed by Seismic Audio's one-year warranty and fast shipping to get your sound system connected properly.

Technical Specifications

Frequently Asked Questions

What equipment do these XLR male to TRS cables connect?

These cables connect gear with XLR male outputs to equipment with 1/4" TRS inputs. Common applications include connecting mixing console auxiliary sends to rack processors like reverbs, compressors, or equalizers. They're also used to route signals from audio interfaces or preamps with XLR outputs to rack-mounted effects units or amplifiers with TRS inputs.

Why choose 2-foot cables instead of longer patch cables?

The 2-foot length is optimized for rack-mounted equipment and close-proximity connections. This length minimizes signal path while providing enough reach for standard 19" rack spacing and equipment placement. Shorter cables reduce potential interference and keep your rack organized, while longer cables would create unnecessary slack and clutter in tight equipment spaces.

Can I use these cables for microphone connections?

These cables are designed for line-level balanced connections, not microphone inputs. While they will physically connect, the XLR male to TRS configuration is typically used for equipment interconnection rather than microphone-to-mixer connections. For microphones, you'd typically need XLR male to XLR female cables.

Do these cables work with unbalanced equipment?

Yes, these balanced cables will work with unbalanced TRS equipment, though you won't get the noise rejection benefits of balanced operation. The TRS connector will carry the signal, but unbalanced gear only uses tip and sleeve connections. For best results, use balanced cables with balanced equipment whenever possible.

How many cables do I need for a stereo processing setup?

For stereo processing, you'll need two cables minimum - one for left channel and one for right channel. This 6-pack provides enough cables for three stereo connections or six mono connections. The pack size works well for multi-channel mixing setups or venues that need several processing chains connected simultaneously.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov