The GH10M-PKG1 delivers a complete live sound solution for bands, DJs, and venues that need both main PA and stage monitoring in one package. This four-piece passive speaker system combines two 15-inch main speakers with two 10-inch floor monitors, covering your front-of-house and on-stage monitoring needs.

The 15-inch GH15L mains handle 400 watts RMS each (800 watts peak) with wide dispersion horn tweeters that project clearly across medium-sized venues. The 10-inch GH10M floor monitors deliver 300 watts RMS each (600 watts peak) with angled cabinets designed for optimal stage monitoring placement.

Each speaker features dual connectivity options with 1/4-inch TS inputs and raw wire terminals, making them compatible with most amplifiers and mixing boards. The main speakers reach down to 50 Hz with 97 dB sensitivity, while the monitors extend to 45 Hz with 95 dB sensitivity at 8-ohm impedance. All four cabinets use 75-watt compression drivers for consistent high-frequency response.

This package works well for bands playing venues up to 300 people, mobile DJs running wedding receptions, or churches needing both congregation coverage and choir monitoring. The system also suits rehearsal spaces, small festivals, and corporate events where both main sound and stage monitoring are essential.

Connect your amplifiers using standard speaker cables to the 1/4-inch inputs or wire terminals. The package includes all four passive speaker cabinets but requires separate amplification. Seismic Audio backs this system with comprehensive warranty coverage and ships ready to perform right out of the box.

Technical Specifications

Frequently Asked Questions

What size venue does this PA package cover?

This system handles venues up to 300 people comfortably when properly amplified. The dual 15-inch mains provide enough output for wedding receptions, small clubs, churches, and outdoor events, while the 10-inch monitors ensure performers can hear themselves clearly on stage.

What amplifiers do I need to power this system?

You'll need amplifiers that can deliver at least 400 watts RMS per channel at 8 ohms for the main speakers and 300 watts RMS per channel for the monitors. A stereo amplifier for the mains and another for the monitors works well, or you can use a four-channel amplifier to power the entire system.

Can I use these monitors as additional main speakers?

While the 10-inch monitors can function as supplementary speakers, they're designed specifically for stage monitoring with angled cabinets for floor placement. For best results, use them as intended for on-stage monitoring and rely on the 15-inch speakers for main PA duties.

Do I need a subwoofer with this package?

The 15-inch main speakers extend down to 50 Hz, which covers most musical content without a subwoofer. However, if you're playing electronic music, hip-hop, or other bass-heavy genres, adding a powered subwoofer will enhance the low-end impact and provide more headroom for the main speakers.

What cables do I need to connect this system?

You'll need speaker cables with 1/4-inch TS plugs on both ends to connect from your amplifier outputs to each speaker's input. Alternatively, you can use raw speaker wire connected directly to the binding post terminals on each cabinet. Standard 14-gauge or 12-gauge speaker wire works well for most applications.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov