The FS100 speaker cable pair delivers reliable signal transmission for live sound setups where distance matters. Each 100-foot cable connects powered speakers, monitors, or PA components using standard 1/4" mono connectors.

Built with 14-gauge, 2-conductor wire and PVC jacketing, these cables maintain signal integrity across long runs without degradation. The heavy-duty construction handles the demands of regular setup and teardown while protecting against interference and physical wear.

At 100 feet per cable, this pair provides the reach needed for larger venues, outdoor events, or installations where speakers must be positioned far from mixing boards or amplifiers. The 14-gauge wire ensures adequate current flow for most passive speaker applications while the mono 1/4" connectors fit standard PA equipment.

Churches positioning speakers throughout sanctuaries, bands spreading monitors across wide stages, and mobile DJs covering large outdoor events will find the 100-foot length eliminates the need for cable joins or extensions. These work with any equipment accepting 1/4" speaker inputs, from powered mixers to dedicated amplifiers.

Each cable terminates in standard 1/4" mono plugs, ready to connect amplifier outputs directly to passive speakers or monitor inputs to mixing consoles. The pair ships together, providing consistent performance for stereo setups.

Seismic Audio backs these cables with a one-year warranty and ships them ready for immediate deployment in your live sound rig.

Technical Specifications

Frequently Asked Questions

What's the maximum venue size these 100-foot speaker cables can handle?

These cables work well for venues up to 200-300 people where speakers need positioning 80-100 feet from amplifiers or mixing boards. The 14-gauge wire maintains signal strength across the full 100-foot run, making them suitable for outdoor festivals, large churches, school auditoriums, and wedding venues with distant speaker placement requirements.

Do these cables work with both powered and passive speakers?

These are speaker cables designed for connecting amplifier outputs to passive speakers, not signal cables for powered speakers. Use them between your power amplifier and passive PA speakers, or from a powered mixer's speaker outputs to passive monitors. For powered speakers, you need standard audio cables with 1/4" TRS or XLR connectors.

Can I use these cables for guitar amplifiers and other instruments?

No, these are specifically designed for speaker-level signals between amplifiers and speakers. Instrument cables use different shielding and impedance characteristics. Using speaker cables for instruments will result in poor sound quality and potential noise issues. Stick to proper instrument cables for guitars, keyboards, and line-level connections.

How does 14-gauge wire compare to thinner speaker cables?

The 14-gauge construction provides better current flow and less resistance than thinner 16 or 18-gauge alternatives, especially important over 100-foot runs. This reduces power loss and maintains better speaker damping factor. For long cable runs like these, the heavier gauge prevents voltage drop that could reduce amplifier performance and speaker output.

What connectors do I need to use these with my PA system?

These cables have 1/4" mono (TS) plugs on both ends, which connect directly to most power amplifiers, powered mixers with speaker outputs, and passive speakers with 1/4" inputs. If your equipment uses Speakon, binding posts, or bare wire connections, you'll need adapters or different cables. Check your amplifier and speaker connection types before ordering.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov