The FL-12MP-PW powered floor monitor delivers professional stage monitoring for bands, solo performers, and live sound engineers who need reliable vocal and instrument monitoring. This active 12-inch wedge monitor puts performers in control of their stage mix with clear, focused sound projection.

Built around a 12-inch woofer with a 75 oz magnet and 3-inch voice coil paired with a titanium horn driver, this monitor delivers 300 watts RMS (600 watts peak) of clean power. The frequency response spans 65 Hz to 20 kHz with 97 dB sensitivity, providing full-range monitoring that cuts through stage volume without feedback.

The integrated Class AB amplifier includes a 3-band EQ (treble, mid, bass) and gain control mounted on the front panel for quick adjustments during performance. Dual pole mount sockets allow positioning as a floor monitor or side-fill speaker. The 7-ply birch plywood cabinet with black carpet covering and metal corners handles the rigors of touring and venue use.

This monitor works well for small to mid-size venues accommodating 100-400 people, from club gigs to church services and corporate events. The wedge design provides proper monitor angle for performers while minimizing stage footprint.

Connect via XLR input/output for daisy-chaining multiple monitors, plus a 3.5mm input for direct playback from phones or tablets. The monitor includes XLR connectors and power cable.

Seismic Audio backs the FL-12MP-PW with a one-year warranty and ships ready to use out of the box.

Technical Specifications

Frequently Asked Questions

What size venues work best with the FL-12MP-PW monitor?

This monitor handles small to mid-size venues seating 100-400 people effectively. The 300-watt RMS power and 106 dB maximum SPL provide sufficient volume for club stages, church platforms, and outdoor events without requiring additional amplification. For larger venues over 500 people, consider pairing with subwoofers or using multiple monitors.

What cables do I need to connect this monitor?

You'll need standard XLR microphone cables to connect from your mixer's monitor send to the monitor's input. The monitor includes XLR input and output connectors, allowing you to daisy-chain multiple monitors from a single mixer output. A standard IEC power cable is included for AC power connection.

Can I use this as a main speaker instead of just a monitor?

Yes, the dual pole mount sockets allow positioning as either a floor monitor or main speaker on a pole stand. The side-mounted pole socket lets you use it as a main PA speaker, while the bottom socket is for traditional monitor placement. However, for main PA use in larger venues, you'll likely want to pair it with a subwoofer.

How do the onboard controls work for live performance?

The front-mounted control panel includes a 3-band EQ (treble, mid, bass) and gain control for quick adjustments during performance. This lets performers or sound engineers fine-tune the monitor mix without returning to the main mixing console. The controls are easily accessible even when the monitor is positioned on stage.

Do I need a crossover or additional processing with this monitor?

No external crossover is needed. This powered monitor includes built-in amplification and signal processing to properly divide frequencies between the 12-inch woofer and titanium horn driver. The integrated Class AB amplifier handles all power management and crossover duties internally, making it a plug-and-play solution.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov