The SA-DUALMOUNT lets DJs, bands, and mobile performers mount two PA speakers on a single tripod stand, cutting setup time and gear hauling in half. Perfect for tight venues where floor space is limited or when you need wide stereo coverage from one central position.

This dual mount bracket transforms any standard 1 3/8" tripod stand or subwoofer pole into a two-speaker rig. The 19.25" center-to-center spacing provides proper stereo separation while keeping your speakers elevated and angled for optimal crowd coverage.

Built from heavy-duty powder-coated steel, the SA-DUALMOUNT handles up to 100 pounds total—easily supporting two 12" PA speakers or smaller cabinets. The bracket measures 23.25" wide by 8.75" tall, adding minimal height while maximizing stability. At just 1.8 pounds, it won't significantly increase your load-in weight.

Use it for wedding receptions where corner placement works better than two stands, mobile DJ gigs in cramped bars, or band performances on small stages. The dual mount works especially well for venues up to 200 people where you need stereo separation but space is tight. Mount matching speakers for balanced coverage or different models for specialized zones.

The bracket fits any speaker with a standard 1 3/8" pole mount socket—the same connection found on most PA speakers. No additional hardware needed beyond your existing tripod stand.

Seismic Audio backs the SA-DUALMOUNT with a one-year warranty and fast shipping. Professional-grade construction at a price that makes sense for working musicians.

Technical Specifications

Frequently Asked Questions

What size venues work best with the SA-DUALMOUNT?

The dual mount works best for venues up to 200 people where you need stereo separation but have limited floor space. It's perfect for wedding receptions, small bars, church fellowship halls, and mobile DJ gigs where corner placement beats spreading two stands across the room. The 19.25" speaker spacing provides good stereo imaging without requiring a wide stage footprint.

Will this bracket fit my existing tripod stand and speakers?

The SA-DUALMOUNT fits any tripod stand or subwoofer pole with a standard 1 3/8" top post. Your speakers need 1 3/8" pole mount sockets on the bottom—this is the standard size on most PA speakers. Check your speaker manual or measure the socket if you're unsure. The bracket supports up to two 12" speakers or 100 pounds total weight.

Can I mount different speaker models on the same bracket?

Yes, you can mix different speaker models as long as each has a 1 3/8" pole socket and the combined weight stays under 100 pounds. Many DJs use this setup to create zones—perhaps a full-range speaker for music and a vocal monitor for announcements. Just ensure the speakers are reasonably balanced in size and weight for stability.

How much height does this add to my speaker setup?

The SA-DUALMOUNT adds 8.75" of height to your overall setup. This positions both speakers well above head level when mounted on a standard 6-7 foot tripod stand, improving sound projection over crowds. The compact vertical profile means you're not adding excessive height that might hit low ceilings or look awkward on smaller stages.

Do I need any additional hardware or cables?

No additional mounting hardware is required—the SA-DUALMOUNT works with your existing tripod stands and speakers. You will need speaker cables to run from your mixer or amplifier to both mounted speakers. Consider slightly longer cables since the speakers will be positioned wider apart than a single-speaker setup would require.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov