The SATRXL-F10 connects mixers to rack-mounted processors, amplifiers, and other pro audio gear when your signal path requires XLR female to 1/4" TRS adaptation. This 10-foot balanced cable handles the most common connection scenario in live sound and studio setups where different manufacturers use different connector standards.

Built with 22-gauge oxygen-free copper conductors and shielded construction, this cable maintains signal integrity across longer runs between your mixing console and outboard gear. The metal XLR female connector locks securely to mixer outputs, while the 1/4" TRS end features fiberglass insulators for reliable connection to equalizers, crossovers, compressors, and power amplifiers.

The heavy-duty rubber jacket stands up to regular setup and breakdown cycles, making this cable suitable for touring musicians, mobile DJs, and installed sound systems. At 10 feet, it provides enough length for typical rack-to-mixer distances without excess cable cluttering your signal path.

Use this cable to connect your mixer's XLR main outputs to a graphic EQ with 1/4" inputs, or to patch from XLR aux sends to rack-mounted compressors and effects processors. It's equally useful in home studios for connecting audio interfaces to monitor controllers or outboard processing gear.

Each cable ships ready to use with no additional adapters required. Seismic Audio backs the SATRXL-F10 with a one-year warranty and ships orders fast so you can get back to making music.

Technical Specifications

Frequently Asked Questions

What equipment does this cable connect?

This cable connects mixing consoles with XLR outputs to rack-mounted gear with 1/4" TRS inputs. Common applications include mixer main outputs to graphic equalizers, aux sends to compressors, or audio interface outputs to monitor controllers. The balanced design maintains professional signal quality across the connection.

Is this cable balanced or unbalanced?

This is a balanced cable that maintains the balanced signal path from XLR to TRS connections. Both XLR and TRS connectors carry tip, ring, and sleeve connections for balanced audio transmission, which reduces noise and interference compared to unbalanced connections.

Can I use this cable for microphones?

No, this cable has an XLR female connector, which receives signals rather than sending them. Microphones require XLR male to XLR female or XLR male to TRS cables. This cable is designed for line-level signals from mixers to processing equipment, not for microphone connections.

How does this compare to XLR male to TRS cables?

XLR female to TRS cables like this one are used when your mixer or source has XLR male outputs that need to connect to 1/4" inputs on processors or amplifiers. XLR male to TRS cables serve the opposite function, typically for sending signals from 1/4" outputs to XLR female inputs.

Will 10 feet reach from my mixer to my rack gear?

For most setups where the mixer sits on a stand near a rack case, 10 feet provides adequate length without excess cable. If your rack is mounted across the room or stage, you may need longer cable runs. Consider your specific setup distances before ordering.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov