Professional patch cable 6-pack designed for connecting balanced XLR outputs to TRS inputs in live sound and studio rack systems. Each red cable spans 2 feet, making them ideal for tight rack configurations and pedalboard connections.

These balanced cables carry audio signals between mixers, equalizers, crossovers, compressors, and amplifiers without noise or interference. The XLR male to 1/4" TRS configuration handles the most common connection scenario in professional audio setups.

Built with 22-gauge oxygen-free copper conductors and full shielding for clean signal transfer. Metal XLR and TRS connectors feature high-grade fiberglass insulators that resist wear and maintain solid connections over thousands of plug cycles. The heavy-duty rubber jacket flexes without kinking or cracking during setup and teardown.

Common applications include connecting mixer outputs to rack processors, linking crossover outputs to power amplifiers, and patching compressor outputs back to mixing consoles. The 2-foot length works perfectly for rack-mounted gear spacing and keeps cable runs organized in live sound rigs and studio installations.

Each cable terminates with a 3-pin XLR male connector on one end and a balanced 1/4" TRS male connector on the other. All six cables ship ready to use with no additional adapters required.

Seismic Audio backs every cable with a one-year warranty and ships from our warehouse within one business day. Professional-grade connectivity at a price that works for working musicians and sound engineers.

Technical Specifications

Frequently Asked Questions

What's the difference between XLR to TRS and XLR to TS cables?

XLR to TRS cables carry balanced signals with separate hot, cold, and ground connections, which eliminates noise and hum over longer runs. TRS (tip-ring-sleeve) maintains the balanced connection from XLR sources like mixer outputs. TS cables are unbalanced and more susceptible to interference, making them unsuitable for professional rack connections.

Can I use these cables to connect my mixer to powered speakers?

These cables work if your powered speakers have 1/4" TRS inputs, but many powered speakers use XLR inputs instead. Check your speaker's input panel before ordering. If your speakers have XLR inputs, you'll need standard XLR male to XLR female cables instead of these XLR to TRS patch cables.

Are 2-foot cables long enough for standard 19-inch rack gear?

Yes, 2-foot cables provide enough length for connecting adjacent rack units with some slack for cable management. The length works well for mixer-to-EQ connections, crossover-to-amp links, and other typical rack configurations. For gear separated by multiple rack spaces, consider longer cable lengths.

Do these cables work with unbalanced 1/4" inputs?

These TRS cables will physically connect to unbalanced 1/4" TS inputs, but you'll only get signal on the tip connection. The balanced XLR signal gets converted to unbalanced, which may result in a 6dB signal loss. For best results, use these cables with equipment that has true balanced TRS inputs.

What equipment typically uses XLR output to 1/4" TRS input connections?

Common scenarios include connecting mixing console XLR outputs to rack processors with TRS inputs, linking digital mixers to analog EQs, and connecting audio interfaces to outboard compressors. Many rack-mounted effects units and processors use TRS inputs while mixing consoles typically provide XLR outputs for main and auxiliary sends.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov