The SA-410 4x10 bass speaker cabinet delivers the punch and clarity that bass players need for live performances, rehearsals, and recording sessions. Built with four 10-inch drivers, this cabinet handles the low-end foundation that drives your sound.

Each 10-inch driver features a substantial 50oz magnet and 2-inch Kapton voice coil, providing the power handling and response needed for modern bass playing. The cabinet handles 400 watts RMS and peaks at 800 watts, giving you headroom for dynamic playing across genres from jazz to metal.

The 45Hz-5000Hz frequency response covers the full bass spectrum, from deep fundamentals to mid-range definition that cuts through dense mixes. At 8 ohms impedance with 96dB sensitivity, this cabinet pairs efficiently with most bass heads and combo amps. The ported design enhances low-frequency output while maintaining tight response.

Whether you're playing club stages, rehearsal spaces, or outdoor events for up to 200 people, the SA-410 provides the low-end foundation your band needs. The recessed handles and durable carpet covering make transport straightforward, while the full metal grille protects your investment.

Connect your bass head or combo amp using standard 1/4-inch speaker cables through the dual input jacks on the terminal cup. The cabinet ships ready to play with no assembly required.

Every SA-410 comes with Seismic Audio's one-year warranty and ships fast from our warehouse to get you performing sooner.

Technical Specifications

Frequently Asked Questions

What size venues can the SA-410 handle?

The SA-410 works well for rehearsal spaces, small to medium clubs, and outdoor events up to 200 people. With 400 watts RMS handling, it provides enough volume for most bass players without needing additional cabinets. For larger venues or if you need more low-end presence, consider pairing it with a second cabinet or adding a subwoofer.

What cables do I need to connect this cabinet?

You'll need a standard 1/4-inch speaker cable to connect from your bass amp head's speaker output to either of the two input jacks on the SA-410's terminal cup. Never use instrument cables for speaker connections. The dual jacks allow you to daisy-chain to a second cabinet if needed.

How does this compare to a 1x15 bass cabinet?

The 4x10 configuration typically provides tighter, more defined bass response with better mid-range clarity compared to a single 15-inch driver. The multiple smaller drivers offer faster response for technical playing styles, while a 1x15 cabinet usually delivers deeper low-end extension. Choose based on your playing style and tonal preferences.

Can I use this cabinet with any bass amp head?

Yes, the SA-410's 8-ohm impedance works with virtually all bass amp heads. Make sure your amp can handle 8-ohm loads and doesn't exceed 800 watts peak power output. Most bass heads between 200-500 watts pair perfectly with this cabinet's 400-watt RMS rating.

Is this cabinet suitable for recording studio use?

Absolutely. The SA-410's frequency response and driver configuration make it well-suited for studio recording. The 45Hz-5000Hz range captures both fundamental bass frequencies and upper harmonics that help bass tracks sit well in mixes. The ported design provides controlled low-end response that translates well through studio monitors.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov