The SA-412PKG1 delivers a complete full stack solution for guitarists who need serious stage presence and the power to fill large venues. This package includes two 4x12 cabinets, giving you the iconic wall of sound that defines rock, metal, and hard rock performances.

Each cabinet handles 400 watts RMS (800 watts peak) through four 12-inch drivers with 30-ounce magnets and 2-inch Kapton voice coils. The 8-ohm impedance per cabinet makes them easy to pair with most guitar heads, whether you're running one cab or the full stack.

The 45Hz to 5kHz frequency response captures the full range of your guitar's voice, from tight low-end punch to crisp highs that cut through dense mixes. At 96dB sensitivity, these cabinets translate every nuance of your amp's tone with authority. The 5/8-inch plywood front baffle provides solid acoustic coupling while the black carpet covering with metal corners ensures road-worthy durability.

Perfect for touring bands, recording studios, and venues that demand professional guitar tone. The full stack configuration works well for stages accommodating 500+ people, while individual cabinets handle smaller clubs and practice spaces. Recessed handles and compact 29" x 29" x 14" dimensions make transport manageable despite their substantial output.

Each cabinet features dual 1/4-inch inputs in a recessed terminal cup for clean connections to your guitar head. Standard speaker cables connect your amp to the cabinets. Both cabinets ship ready to play with a one-year warranty and fast shipping from Seismic Audio.

Technical Specifications

Frequently Asked Questions

What size venues can this full stack handle?

This dual 4x12 setup delivers enough power and projection for large venues accommodating 500+ people, outdoor festivals, and recording studios. Each cabinet's 400-watt RMS capacity and 96dB sensitivity provide substantial headroom for clean tones and controlled overdrive at high volumes. For smaller clubs under 200 people, a single cabinet often provides plenty of coverage.

What impedance will I get when connecting both cabinets?

When you connect both 8-ohm cabinets in parallel to a single amp head, the total load becomes 4 ohms. Most guitar heads are designed to handle 4-ohm loads safely, but always check your amplifier's specifications before connecting. You can also run each cabinet from separate amp outputs if your head has multiple speaker outs.

Do I need a subwoofer with these guitar cabinets?

No, these cabinets are designed specifically for electric guitar and don't require a subwoofer. The 45Hz low-frequency response handles the deepest guitar fundamentals, including dropped tunings and extended-range guitars. Adding a subwoofer would actually muddy your guitar tone since these frequencies aren't part of the guitar's natural voice.

What cables do I need to connect these to my amp head?

You'll need standard 1/4-inch speaker cables (not instrument cables) to connect your guitar head to the cabinets. Each cabinet has dual inputs, so you can daisy-chain from one cabinet to the next or run separate cables from your amp if it has multiple speaker outputs. Make sure to use cables rated for speaker-level signals.

How does this compare to a single 4x12 cabinet?

The dual cabinet setup doubles your power handling from 400 to 800 watts RMS total and significantly increases your sound projection and stage presence. While a single SA-412 works well for most club gigs, the full stack provides the visual impact and acoustic coupling that larger stages demand, plus better dispersion across wide venues.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov