The SAMIDI10 2-pack delivers reliable MIDI connectivity for keyboard players, producers, and electronic musicians who need to link multiple MIDI devices in their setup. These cables handle the digital communication between synthesizers, drum machines, sequencers, and DAW interfaces that modern electronic music production demands.

Each 10-foot cable provides the length needed to connect gear across a studio desk, stage setup, or home production station without signal loss. The 5-pin DIN connectors follow the standard MIDI specification, ensuring compatibility with virtually every piece of MIDI-enabled equipment from vintage synthesizers to modern controllers.

The serviceable metal headshell connectors resist wear from frequent plugging and unplugging, while the discrete 5-pin wiring maintains clean data transmission. At 10 feet per cable, you get enough reach for most studio configurations and live setups without excess cable clutter.

Use these cables to sync drum machines with sequencers, connect keyboard controllers to sound modules, or chain multiple synthesizers in a live performance rig. They work equally well in bedroom studios and professional recording environments where MIDI timing accuracy matters.

Both cables terminate in standard 5-pin male MIDI connectors and come ready to use out of the box. Seismic Audio backs these cables with a one-year warranty and 30-day money-back guarantee, providing the reliability your music production workflow requires.

Technical Specifications

Frequently Asked Questions

What MIDI devices can I connect with these cables?

These cables work with any equipment featuring standard 5-pin MIDI ports, including synthesizers, drum machines, sequencers, MIDI controllers, and audio interfaces. The standard MIDI specification ensures compatibility across brands and decades of MIDI-enabled gear. You can connect vintage synthesizers from the 1980s to modern DAW controllers with the same cable.

Are 10-foot MIDI cables long enough for most setups?

Ten feet provides sufficient length for typical studio desk configurations and most stage setups where electronic instruments are grouped together. This length works well for connecting a keyboard controller to a sound module, linking drum machines in a desktop setup, or running MIDI between nearby rack units. For longer runs across large stages, you may need additional cables or a MIDI splitter.

Do these cables carry audio signals or just MIDI data?

MIDI cables only transmit digital control data like note on/off messages, velocity, and program changes - they do not carry audio signals. You'll need separate audio cables to hear sound from your MIDI devices. Connect the MIDI cable for control communication, then use standard audio cables to route sound from your synthesizer or drum machine to your mixer or audio interface.

Can I daisy-chain multiple MIDI devices with these cables?

Yes, you can chain MIDI devices using the MIDI THRU port on most equipment, though each device in the chain may introduce slight timing delays. For complex setups with multiple devices, a dedicated MIDI splitter or interface often provides better timing accuracy. These cables work perfectly for simple chains of 2-3 devices or point-to-point connections.

What's the difference between 3-pin and 5-pin MIDI cables?

Standard MIDI uses 5-pin DIN connectors, though only three pins carry data - these cables follow that standard specification. Some cheaper cables use 3-pin wiring internally, but 5-pin discrete wiring like these cables provide better signal integrity and future compatibility. The 5-pin construction also supports potential phantom power applications that some specialized MIDI devices require.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov