The BS12Q10-2Pack delivers reliable connections between powered amplifiers and passive speakers, designed for live sound engineers, venue operators, and musicians running high-power PA systems. This pair of 10-foot cables handles the demanding signal requirements of professional audio installations where consistent power delivery matters.

Each cable features 12-gauge conductors that maintain signal integrity across longer runs while handling substantial power loads without voltage drop. The heavy-duty construction ensures your amplifier's full output reaches your speakers cleanly, whether you're driving main PA cabinets, floor monitors, or subwoofers in demanding live environments.

The banana plug connectors provide secure, positive contact with amplifier binding posts, while the 1/4" mono connectors fit standard speaker input jacks on passive cabinets. At 10 feet per cable, this length works well for stage monitor positioning, amplifier rack-to-speaker runs in smaller venues, or connecting powered subs to satellite speakers. The shielded PVC jacket protects against interference and physical wear during transport and setup.

Common applications include connecting rack-mounted power amplifiers to passive PA speakers in venues up to 200 people, linking powered mixers to floor monitors, or running dedicated lines to subwoofers in band setups. The cables arrive ready to use with no additional adapters required.

Seismic Audio backs these speaker cables with a one-year warranty and ships them fast to keep your sound system running without delays.

Technical Specifications

Frequently Asked Questions

What's the difference between speaker cables and instrument cables?

Speaker cables like the BS12Q10 use thicker 12-gauge wire to carry high-power signals from amplifiers to passive speakers without voltage loss. Instrument cables use thinner wire and are designed for low-level signals from guitars, microphones, and line-level sources. Using instrument cables for speaker connections can result in power loss, overheating, and potential damage to your amplifier.

Can I use these cables to connect my powered mixer to passive speakers?

Yes, these cables work perfectly for connecting the speaker outputs of a powered mixer to passive PA speakers or monitors. The banana plugs connect to your mixer's binding post outputs, while the 1/4" connectors plug into your passive speaker cabinets. This setup is ideal for small to medium venues up to 200 people.

Do I need special adapters to use these with my amplifier rack?

Most professional power amplifiers use binding post outputs that accept banana plugs directly, so no adapters are needed. However, some older or budget amplifiers may have 1/4" output jacks instead of binding posts. Check your amplifier's output connectors before ordering, or consider our 1/4" to 1/4" speaker cables if both ends of your signal chain use quarter-inch connections.

Are 10-foot cables long enough for stage monitor positioning?

Ten feet provides sufficient length for most stage monitor applications, allowing you to position floor wedges at the front edge of small to medium stages while keeping your amplifier rack upstage or in a side rack position. For larger stages or longer runs to monitors, consider our 25-foot or 50-foot speaker cable options to avoid signal loss from daisy-chaining shorter cables.

Will these cables work with my subwoofer setup?

Yes, these speaker cables handle the power demands of subwoofer applications well. The 12-gauge conductors maintain clean signal transmission for the high-current requirements of bass frequencies. Use them to connect your amplifier's subwoofer output to passive subwoofers, or to link powered subwoofers to satellite speakers in a complete PA system configuration.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov