The SATRXL-M25 25-foot XLR male to TRS patch cable bridges the connection gap between professional mixers, rack gear, and amplifiers. This balanced cable handles the signal routing that powers live sound systems, studio setups, and mobile DJ rigs.

Built with a metal 3-pin XLR male connector on one end and a 1/4" TRS male connector on the other, this cable maintains balanced audio signals between devices with different input/output configurations. The 22-gauge oxygen-free copper conductors preserve signal integrity across the 25-foot run.

The heavy-duty flexible rubber jacket withstands the rigors of regular setup and teardown while the shielded construction protects your audio from interference. At 25 feet, this cable provides enough length for most rack-to-mixer connections and stage monitoring setups without excess cable cluttering your workspace.

Use this cable to connect mixer outputs to equalizers, crossovers, compressors, or power amplifiers in venues up to 500 people. It's equally suited for connecting outboard gear in recording studios or linking components in church sound systems where rack equipment may be located away from the mixing console.

The green jacket makes cable identification quick during setup and troubleshooting. This single cable includes both connectors and arrives ready to integrate into your existing audio chain.

Seismic Audio backs this patch cable with a one-year warranty and ships it ready for immediate use in your next gig or installation.

Technical Specifications

Frequently Asked Questions

What equipment does this XLR to TRS cable connect?

This cable connects mixers with XLR outputs to rack equipment with 1/4" TRS inputs, such as equalizers, crossovers, compressors, and power amplifiers. It's also used to connect outboard gear in recording studios where different manufacturers use different connector types. The balanced design maintains professional audio quality across the connection.

Is 25 feet long enough for typical live sound setups?

Yes, 25 feet handles most mixer-to-rack connections in venues up to 500 people where the mixing console and amplifier rack are positioned within normal proximity. For larger venues or installations where equipment is spread further apart, you may need longer cables. This length minimizes excess cable while providing adequate reach for standard configurations.

Can I use this cable for microphone connections?

No, this cable has an XLR male connector, which means it cannot connect directly to microphones that also have XLR male outputs. This cable is designed for line-level connections between mixers and rack equipment, not for microphone inputs which require XLR female connectors.

What's the difference between TRS and TS connections?

TRS (Tip-Ring-Sleeve) connections carry balanced signals using three conductors, which reduces noise and interference over longer cable runs. TS (Tip-Sleeve) connections are unbalanced and use only two conductors. This cable's TRS connector maintains the balanced signal integrity from your mixer's XLR output.

Will this cable work with both powered and passive equipment?

Yes, this cable carries line-level signals between any equipment with XLR outputs and TRS inputs, regardless of whether the destination device is powered or passive. It's commonly used to connect mixers to both powered rack equipment like compressors and passive devices like crossovers that feed power amplifiers.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov