The SAiTSY3 splitter cable bridges the gap between consumer devices and professional audio gear. Musicians, DJs, and sound engineers use this 3-foot cable to connect smartphones, laptops, and media players directly to mixing boards and PA systems.

This stereo breakout cable takes a single 1/8" TRS (3.5mm) output and splits it into two separate 1/4" TS mono signals. The white connector carries the left channel (tip), while the red connector handles the right channel (ring), giving you independent control over each stereo channel at your mixer.

Built with oxygen-free copper conductors, the SAiTSY3 maintains signal integrity across the 3-foot length. The spiral shielding protects against interference while keeping the cable flexible for stage use. Color-coded connectors eliminate guesswork during setup—white for left, red for right.

Perfect for connecting phones to DJ mixers at clubs, laptops to church sound systems for backing tracks, or media players to band PAs for intermission music. The 3-foot length works well for desktop setups and equipment racks without excess cable clutter.

Simply plug the 3.5mm end into your device's headphone output and connect the 1/4" plugs to two channels on your mixer. No adapters needed—the cable handles the connection and format conversion in one piece.

Seismic Audio backs the SAiTSY3 with a one-year warranty and fast shipping. Professional connectivity at a practical price point.

Technical Specifications

Frequently Asked Questions

What devices can I connect with this splitter cable?

The SAiTSY3 works with any device that has a standard 3.5mm headphone output, including smartphones, tablets, laptops, MP3 players, and portable audio devices. The 1/4" outputs connect to mixing boards, audio interfaces, and professional audio equipment with line inputs.

How do the left and right channels work with this cable?

The white 1/4" connector carries the left channel from the stereo signal, while the red connector carries the right channel. This lets you route each stereo channel to separate mixer channels, giving you independent level control and processing for each side of your stereo source.

Can I use this cable for live performances?

Yes, the 3-foot length works well for connecting media players or phones to mixers during live shows. The oxygen-free copper construction and spiral shielding maintain signal quality, while the color-coded connectors make quick setup easy in low-light conditions.

Will this work with balanced mixer inputs?

The SAiTSY3 outputs unbalanced mono signals through 1/4" TS connectors. These work fine with balanced TRS inputs on mixers—just connect to the tip and sleeve, leaving the ring floating. For longer cable runs, consider using balanced cables after the mixer.

Do I need any other cables or adapters?

No additional cables or adapters are required. The SAiTSY3 provides the complete connection from your device's 3.5mm output to two 1/4" mixer inputs. The cable handles both the physical connection and the stereo-to-dual-mono signal conversion in one piece.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov