The LightRage088 delivers serious low-end bass for car audio enthusiasts who want their system to make a statement. This dual 8-inch subwoofer enclosure combines 800 watts of total power with RGB illumination that syncs to your music, turning your car into a mobile concert experience.

Two high-powered 8-inch woofers with non-pressed paper cones and specially treated foam surrounds push deep, chest-thumping bass that fills your vehicle. The rear vented design maximizes bass output while maintaining clean, punchy low frequencies that cut through road noise and cabin acoustics.

Each woofer handles 400 watts max power and features a 1.5-inch 4-layer dual voice coil with 30-ounce magnets for solid magnetic force. The 4-ohm impedance works with most car amplifiers, while 90 dB sensitivity ensures efficient power conversion. Frequency response spans 40Hz to 1kHz, covering the full sub-bass spectrum where you feel the music as much as you hear it.

Perfect for daily drivers who want concert-level bass, show cars that need visual impact, or mobile audio competitors building SPL systems. The RGB lighting adds visual drama for car shows while the rear vent design works well in trunk installations or custom enclosures.

Connect via binding post terminals to your car amplifier using standard speaker wire. The included remote control lets you adjust the RGB lighting patterns and intensity from the driver's seat. Smooth carpet finish matches most vehicle interiors while the compact 21.6" x 10.6" x 9" footprint fits standard trunk spaces.

Backed by Seismic Audio's warranty and ships ready to install with your existing car audio amplifier.

Technical Specifications

Frequently Asked Questions

What amplifier power do I need to drive this subwoofer enclosure?

You'll need a car amplifier capable of delivering at least 400-800 watts total power at 4 ohms. Most 2-channel or bridged mono car amplifiers in the 500-1000 watt range work well. The 4-ohm impedance is compatible with virtually all car audio amplifiers, and the 90 dB sensitivity means it will get loud even with moderate power.

How do I wire the dual voice coils and what cables do I need?

Each 8-inch woofer has dual 4-ohm voice coils that can be wired in series (8 ohms) or parallel (2 ohms) per woofer. For most installations, wire each woofer's coils in parallel for 2 ohms, then wire both woofers in series for a final 4-ohm load. You'll need standard car audio speaker wire (12-14 gauge recommended) to connect the binding posts to your amplifier.

Will this fit in my car's trunk and how much space does it need?

The enclosure measures 21.6" x 10.6" x 9" and weighs 30.6 pounds, fitting most standard car trunks and SUV cargo areas. You'll want to secure it properly since it's a rear-vented design that needs some clearance behind the ports. Most compact cars, sedans, and SUVs can accommodate this size without losing significant cargo space.

How does the RGB lighting work and can I control it while driving?

The RGB illumination system includes multiple color and pattern options controlled by an included remote. The lights can sync to your music or run in preset patterns, and you can adjust brightness and color from the driver's seat. The lighting system connects to your car's 12V power supply and won't drain your battery when the engine is off.

Do I need an additional amplifier for the lighting or just for the subwoofers?

The RGB lighting system has its own built-in controller and only needs a 12V power connection from your car's electrical system. You only need to purchase a separate car audio amplifier for the subwoofers themselves. The lighting and audio systems are independent, so you can run the lights even when the sound system is off.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov