The LightRage10 delivers serious bass for car audio enthusiasts who want both performance and visual impact. This 10-inch subwoofer enclosure combines 500 watts of peak power with customizable RGB lighting that responds to your music.

The rear-vented design maximizes bass output in the critical 35-600 Hz range, giving you the deep low-end response that makes vocals punch and kick drums hit hard. The 4-ohm dual voice coil configuration works efficiently with most car amplifiers, while the 90 dB sensitivity ensures you get maximum output without overworking your amp.

Built around a 10-inch woofer with a non-pressed paper cone and foam surround, this enclosure handles 500 watts peak power through its 2-inch, 4-layer dual voice coil design. The 40-ounce magnet provides the magnetic field strength needed for controlled bass response, while the rear port tuning extends low-frequency output. The smooth carpet finish integrates cleanly with most vehicle interiors.

Perfect for compact cars, trucks, and SUVs where trunk space matters but bass performance can't be compromised. The 16" x 12" x 13.25" footprint fits most installations while delivering the output typically associated with much larger enclosures.

Connect directly to your car amplifier using the binding post terminals - standard speaker wire is all you need. The RGB lighting system includes a wireless remote for color and pattern control.

Backed by Seismic Audio's warranty and ships ready to install. Professional-grade car audio performance at a price that won't break your budget.

Technical Specifications

Frequently Asked Questions

What amplifier power do I need to drive the LightRage10?

The LightRage10 handles up to 500 watts peak power and works efficiently with amplifiers ranging from 250-500 watts RMS. The 4-ohm impedance and 90 dB sensitivity mean it will produce solid bass even with smaller amplifiers around 200 watts. For maximum output, match it with a 400-500 watt RMS amplifier.

How much trunk space does this subwoofer enclosure require?

The LightRage10 measures 16" x 12" x 13.25" and weighs 28.7 pounds, making it suitable for most compact car installations. The relatively small footprint allows it to fit in sedan trunks, behind truck seats, or in SUV cargo areas without dominating the available space.

What cables do I need to connect this subwoofer to my car stereo?

You'll need speaker wire to connect from your amplifier to the binding post terminals on the enclosure, plus RCA cables and a remote wire from your head unit to the amplifier. The RGB lighting system connects separately and includes its own wireless remote - no additional wiring to your stereo is required.

How does the RGB lighting system work?

The RGB lighting is built into the subwoofer cone and responds to your music with customizable colors and patterns. The included wireless remote lets you select solid colors, color-changing modes, or sync the lights to your bass output. The lighting system operates independently of the audio and won't affect sound performance.

Will this subwoofer work with my factory car stereo?

The LightRage10 requires an external amplifier to function - it cannot connect directly to a factory head unit. You'll need to add a car audio amplifier rated for 4-ohm loads between your stereo and this subwoofer. Most aftermarket head units and many factory premium systems have the pre-amp outputs needed to drive an external amplifier.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov