The SA-WT80W wakeboard tower speakers deliver marine-grade sound for boats, watercraft, and outdoor recreational vehicles. This pair of white 8-inch speakers brings your music to life on the water with weatherproof construction built to handle both fresh and saltwater environments.

Each speaker produces 200 watts RMS and 300 watts peak power, providing enough volume to cut through wind and engine noise while maintaining clear audio reproduction. The 2-way design combines an 8-inch polypropylene cone woofer with a 1-inch midrange tweeter for balanced sound across the frequency spectrum.

With 4-ohm impedance and 60Hz-20kHz frequency response, these speakers integrate easily with most marine amplifiers and head units. The 98 dB sensitivity rating means they'll perform well even with moderate power sources. Heavy-duty ABS plastic construction with UV-resistant coating protects against sun damage and saltwater corrosion, while stainless steel terminals resist rust and ensure reliable connections.

Perfect for wakeboard boats, pontoons, ATVs, and other outdoor applications where you need weather-resistant sound. The adjustable mounting brackets accommodate tower bars between 1.25 and 2 inches in diameter, making installation straightforward on most watercraft towers and roll bars.

Standard speaker wire connections make setup simple - just run marine-grade wire from your amplifier to each speaker location. Each pair includes heavy-duty adjustable mounting brackets and hardware for secure installation.

Backed by Seismic Audio's one-year warranty and same-day shipping, these marine speakers deliver reliable performance season after season.

Technical Specifications

Frequently Asked Questions

What size boat or watercraft are these speakers suitable for?

The SA-WT80W speakers work well on boats from 18 feet up to mid-size pontoons and cabin cruisers around 30-35 feet. With 200 watts RMS per speaker, they provide enough volume for most recreational boating activities, though larger vessels or high-noise environments may benefit from additional speakers or a subwoofer system.

What amplifier power do I need to drive these speakers?

These 4-ohm speakers work best with 150-250 watts RMS per channel from your marine amplifier. You can use less power - they'll still perform well with 100+ watts per channel - but avoid exceeding 300 watts peak to prevent damage. Most quality marine head units with built-in amplifiers won't provide enough power for optimal performance.

Will these speakers work in saltwater environments?

Yes, the SA-WT80W speakers are specifically designed for both fresh and saltwater use. The ABS plastic construction, UV-resistant coating, and stainless steel terminals all resist corrosion from salt exposure. However, regular freshwater rinsing after saltwater use will help maximize their lifespan and maintain optimal performance.

What's the mounting depth and will these fit my wakeboard tower?

These speakers require 10.5 inches of mounting depth and include adjustable brackets that fit tower bars between 1.25 and 2 inches in diameter. This covers most standard wakeboard towers and pontoon rails. Measure your available space and tower diameter before ordering to ensure proper fit and adequate clearance.

Do I need marine-grade speaker wire for installation?

Yes, you should use marine-grade tinned copper speaker wire rated for wet environments. Standard automotive speaker wire will corrode quickly in marine applications. Run 12 or 14 AWG marine wire from your amplifier location to each speaker, and use marine-grade connectors or solder and heat shrink all connections to prevent corrosion.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov