This SA-410PKG1 combo delivers comprehensive bass coverage for bassists who need both the punch of a 4x10 and the tight response of a 2x10 cabinet. Whether you're recording in the studio, rehearsing with your band, or performing live gigs, this pairing gives you tonal flexibility that single cabinets can't match.

The SA-410 cabinet drives four 10-inch woofers with 50 oz magnets and 2-inch Kapton voice coils, delivering 400 watts RMS power handling with a frequency response from 45Hz to 5kHz. The SA-210 features two of the same high-output drivers, also handling 400 watts RMS with extended low-end response down to 40Hz. Both cabinets are wired at 8 ohms and feature ported designs for enhanced bass response.

Each cabinet is built with 5/8-inch plywood front panels, black carpet covering, and metal corner protection for road-ready durability. Full metal grilles protect the drivers while maintaining clear sound projection. The SA-410 measures 26" x 26" x 15" while the SA-210 is more compact at 19" x 26" x 15", making transport manageable for working musicians.

This combination works well for medium venues up to 200 people, band rehearsals, and studio sessions where you need both cabinet options available. Stack them for maximum output or use individually depending on the venue size and desired tone.

Both cabinets feature dual 1/4-inch inputs for daisy chaining to additional cabinets or connecting multiple bass heads. Standard instrument cables connect your bass head to either cabinet.

Each cabinet includes a one-year warranty and ships direct from Seismic Audio's warehouse for reliable delivery to your door.

Technical Specifications

Frequently Asked Questions

Can I run both cabinets from one bass head?

Yes, both cabinets can be daisy-chained together using standard 1/4" instrument cables. Since each cabinet is 8 ohms, running both together presents a 4-ohm load to your amplifier. Make sure your bass head can handle 4-ohm operation and has sufficient wattage to drive both cabinets effectively.

What size venues work best with this cabinet combination?

The SA-410 alone handles small to medium venues up to 150 people, while adding the SA-210 extends coverage to venues up to 200-250 people. For larger venues or outdoor events, you may need additional amplification or PA support. The combination works well for band rehearsals, recording sessions, and club-sized gigs.

Do I need both cabinets or can I use just one?

Each cabinet works independently, so you can use just the SA-410 for most gigs or the SA-210 for smaller venues and practice. The SA-410 provides more volume and low-end punch, while the SA-210 offers tighter response and easier transport. Having both gives you flexibility to match your rig to the venue size.

What bass head wattage works best with these cabinets?

Each cabinet handles 400 watts RMS, so a bass head producing 300-800 watts will work well. For the SA-410 alone, 300-400 watts provides good headroom. When running both cabinets together (4-ohm load), a 600-800 watt head can fully utilize their power handling capacity without risk of damage.

How do these compare to a single 8x10 cabinet?

This combination offers more flexibility than a traditional 8x10 since you can use the cabinets separately or together. The total driver surface area is six 10-inch speakers versus eight, so maximum output is somewhat less than a full 8x10. However, you gain portability and tonal options that a single large cabinet can't provide.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov