The FL-12MP delivers professional floor monitor performance for bands, solo performers, and venues that need reliable stage monitoring. Built with premium 7-ply birch plywood construction and a titanium compression driver, this 12" monitor provides the clarity and durability required for live performance environments.

This passive floor monitor handles 300 watts RMS with a frequency response from 60 Hz to 20 kHz, ensuring vocals and instruments cut through the mix on stage. The 1.5" titanium tweeter with 4"x10" horn delivers clear high frequencies, while the 12" woofer with 75 oz magnet and 3" voice coil provides solid midrange presence for monitoring applications.

The crossover features 12/18 dB per octave slopes at 3 kHz with dual glass bulb tweeter protection, ensuring reliable performance at high volumes. With 97 dB sensitivity and 8-ohm impedance, the FL-12MP works efficiently with most amplifiers and powered mixers. The dual-port design enhances low-frequency response while maintaining clarity across the frequency range.

Ideal for small to medium venues accommodating 100-200 people, this monitor works well for band rehearsals, live performances, DJ monitoring, and church sound systems. The rugged birch plywood cabinet with black carpet covering and recessed steel handles stands up to regular transport and stage use.

Connect via dual 1/4" or dual Speakon inputs to your amplifier or powered mixer. Standard speaker cables work with either connection type. Each monitor weighs 39 pounds and measures 22.5" x 13.25" x 15.75" for easy positioning on stage.

Seismic Audio backs the FL-12MP with a one-year warranty and ships directly to your door.

Technical Specifications

Frequently Asked Questions

What size venue can the FL-12MP handle as a floor monitor?

The FL-12MP works well for small to medium venues up to 200 people when used as stage monitors. With 300 watts RMS power handling and 97 dB sensitivity, a pair provides adequate monitoring for most band setups in clubs, churches, or outdoor events of this size.

What cables do I need to connect the FL-12MP monitors?

You can connect using either 1/4" TS speaker cables or Speakon cables, as each monitor has dual inputs of both types. Connect from your amplifier or powered mixer's speaker outputs to either the 1/4" or Speakon inputs on the monitor. Standard 12 or 14 gauge speaker cable works well for runs up to 50 feet.

Do I need a subwoofer with these floor monitors?

For stage monitoring applications, the FL-12MP's 60 Hz low-frequency response typically provides sufficient bass for most instruments and vocals. However, if you're monitoring bass guitar, electronic music, or need deep bass reinforcement, adding a subwoofer will enhance the low-end response below 60 Hz.

How does the FL-12MP compare to active monitors?

The FL-12MP is a passive monitor that requires an external amplifier, giving you flexibility to choose your preferred amp and allowing easier replacement if components fail. Active monitors have built-in amplifiers but cost more and can be harder to service. The passive design also means lighter weight per monitor when transporting.

Can these monitors be used for main PA speakers?

While the FL-12MP can function as PA speakers for very small venues or acoustic performances, they're optimized for floor monitor use with their angled cabinet design. For main PA applications, consider Seismic Audio's full-range PA speakers which are designed for front-of-house sound reinforcement and audience coverage.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov