The CLA-2x5 line array system delivers focused sound coverage for small to medium venues, churches, and mobile DJ setups where traditional PA speakers can't provide even distribution across the audience. This 4-cabinet passive system creates the directional control and consistent coverage that line arrays are known for, without the complexity of larger touring systems.

Each cabinet features dual 5-inch woofers with 30-ounce magnets and 1.5-inch voice coils, paired with a 1 3/8-inch titanium compression driver through a wide dispersion horn. The 55° x 25° coverage pattern focuses sound where your audience is while minimizing unwanted reflections off walls and ceilings.

At 150 watts RMS per cabinet (300 watts peak), the complete 4-cabinet system handles 600 watts RMS with a maximum SPL of 125 dB per unit. The 16-ohm impedance and 65Hz-20kHz frequency response work well with most power amplifiers. High-intensity aluminum suspension hardware allows angle adjustments of 0, 3, 6, 12, and 15 degrees for precise coverage shaping.

Mount these on line array frames for front-of-house coverage in venues up to 300 people, or use as side-fill systems in larger spaces. The all-birch plywood construction keeps each 22-pound cabinet manageable for mobile applications while providing the rigidity needed for clean low-frequency response.

Connect via dual Speakon inputs on each cabinet—you'll need speaker cables and a compatible power amplifier. Each cabinet includes side pocket handles for transport. Backed by Seismic Audio's one-year warranty with fast shipping nationwide.

Technical Specifications

Frequently Asked Questions

What size venue can this 4-cabinet line array system cover?

This system works well for venues up to 300 people when used as the main PA. The focused 55° x 25° coverage pattern per cabinet and 125 dB maximum SPL provide even sound distribution across medium-sized rooms, outdoor events, or worship spaces. For larger venues, consider using these as side-fill or delay systems alongside a larger main PA.

What amplifier and cables do I need to power this system?

You'll need a power amplifier capable of delivering at least 150 watts RMS per channel at 16 ohms—a 4-channel amp or two stereo amps work well for the complete system. Connect each cabinet using Speakon-to-Speakon speaker cables. The dual Speakon inputs on each cabinet allow for daisy-chaining if your amplifier configuration requires it.

How do I adjust the coverage angles on these line array speakers?

Each cabinet includes high-intensity aluminum suspension hardware that allows angle adjustments of 0, 3, 6, 12, and 15 degrees. You'll need compatible line array rigging frames (sold separately) to mount and angle the cabinets. The adjustable angles let you shape coverage for different room acoustics and audience areas.

Do I need subwoofers with this line array system?

The 65Hz low-frequency response handles most live sound applications, but adding subwoofers will improve bass impact for DJ sets, contemporary worship music, or venues where deep bass is important. The 3kHz crossover point works well with most subwoofers when using an electronic crossover or powered subwoofer with high-pass outputs.

How does this compare to using regular PA speakers for the same venue size?

Line arrays provide more even sound coverage and better control over where sound goes compared to traditional PA speakers. While regular speakers might be louder directly in front, line arrays maintain consistent volume and clarity throughout the coverage area. This reduces hot spots near the speakers and dead zones toward the back of the venue.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov