The GH10L pair delivers reliable PA sound for bands, DJs, and venues that need clear, full-range coverage without breaking the budget. These passive 10-inch speakers handle the essentials of live sound reinforcement with straightforward engineering and road-ready construction.

Each cabinet puts out 300 watts RMS and 600 watts peak, powered by a 10-inch pulp-ribbed woofer paired with a 1-inch horn tweeter. The wide dispersion horn design ensures consistent coverage across your audience, while the tuned bass reflex enclosure adds low-end punch that cuts through the mix.

The 8-ohm impedance makes these speakers easy to wire in parallel or daisy-chain configurations. At 93 dB sensitivity, they'll get loud with most power amps without requiring excessive wattage. The 40 Hz to 20 kHz frequency response covers everything from kick drums to vocal clarity. MDF construction with steel mesh grilles and ABS corner guards means they'll survive regular transport and setup.

These work well for indoor venues up to 200 people or smaller outdoor gatherings. Bands can use them as mains for club gigs, while DJs will appreciate the clear midrange for vocal announcements and music reproduction. Churches and schools often pair them with a subwoofer for fuller coverage.

Connect via 1/4-inch TS inputs or raw wire terminals. You'll need a power amplifier and standard speaker cables. Each cabinet weighs 22 pounds and measures 19" x 12.5" x 10".

Backed by Seismic Audio's one-year warranty with fast shipping to get your PA system running quickly.

Technical Specifications

Frequently Asked Questions

What size venue will these speakers cover?

The GH10L pair works well for indoor venues up to 200 people, such as small clubs, churches, or event halls. For outdoor use, expect good coverage for gatherings of 100-150 people. If you need more bass response for larger crowds or dance music, consider adding a subwoofer to the system.

What amplifier power do I need for these speakers?

These speakers handle 300 watts RMS each, so you'll want an amplifier that delivers 300-400 watts per channel into 8 ohms for optimal performance. A 600-watt stereo amp or two 300-watt mono amps will drive them to their full potential. Make sure your amp is stable into 8-ohm loads.

Can I daisy-chain multiple pairs of these speakers?

Yes, the 8-ohm impedance makes it easy to wire multiple cabinets in parallel. Two cabinets per amplifier channel will present a 4-ohm load, which most amps can handle. Always check your amplifier's specifications to ensure it's stable at the final impedance load before connecting multiple speakers.

Do I need a subwoofer with the GH10L speakers?

For speech, acoustic music, or smaller venues, the GH10L pair provides adequate bass response down to 40 Hz. However, if you're playing dance music, hip-hop, or performing in larger spaces, adding a subwoofer will significantly improve the low-end impact and overall system balance.

What cables do I need to connect these speakers?

You'll need standard speaker cables with 1/4-inch TS plugs, or you can use raw speaker wire connected to the binding post terminals. The length depends on your setup, but 12 or 14 AWG wire works well for most applications. Don't use instrument cables or microphone cables for speaker connections.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov