The SALA-210 line array speakers deliver professional sound reinforcement for venues that demand consistent coverage and powerful output. This matched pair targets bands, venues, and sound companies running mid-to-large scale events where even coverage across the audience is critical.

Each cabinet combines two 10-inch woofers with dual 1⅜-inch titanium compression drivers to produce focused, directional sound that cuts through ambient noise. The 70° x 30° coverage pattern creates the controlled dispersion that makes line arrays effective for reaching distant listeners without overwhelming front rows.

At 560 watts RMS per cabinet (1120 watts peak), these 16-ohm speakers handle serious power while maintaining headroom for dynamic material. The 65Hz-20kHz frequency response covers the full range needed for live music, with a 2.8kHz crossover point optimizing the handoff between drivers. Maximum SPL reaches 130dB, providing the volume needed for outdoor festivals and large indoor venues.

Deploy these for front-of-house systems in clubs, churches, gymnasiums, and outdoor events serving 200-500 people per pair. The birch plywood construction and aluminum suspension hardware support professional rigging, while bi-amp switching allows separate amplifier channels for precise control.

Dual Speakon inputs accept standard PA cables from your amplifier or powered mixer. Side pocket handles and line array frame compatibility simplify transport and setup.

Seismic Audio backs each pair with a one-year warranty and ships from multiple warehouses for fast delivery to your venue.

Technical Specifications

Frequently Asked Questions

What size venue can the SALA-210 pair handle?

This pair effectively covers venues serving 200-500 people, depending on the space and music style. The controlled 70° x 30° dispersion pattern works well for rectangular venues like gymnasiums, worship halls, and outdoor festival stages where you need to reach distant listeners without over-driving the front rows.

Do I need a subwoofer with these line array speakers?

For full-range music, yes. While the SALA-210 reaches down to 65Hz, adding a subwoofer handles the deep bass that makes live music feel full and impactful. The 2.8kHz crossover point means these excel at vocal clarity and mid-frequency punch, but dedicated subs will handle the low-end foundation your audience expects.

What amplifier power do I need for each cabinet?

Each SALA-210 handles 560 watts RMS at 16 ohms, so you'll want an amplifier delivering at least 600-800 watts per channel into 16 ohms for clean headroom. Many professional power amplifiers work well, but check your amp's 16-ohm power rating since many specs only list 4-ohm or 8-ohm performance.

Can I bi-amp these speakers?

Yes, the SALA-210 features switchable bi-amp mode. This lets you run separate amplifier channels to the woofers and compression drivers, giving you precise control over the frequency balance. You'll need a crossover processor set to 2.8kHz to split the signal, plus twice as many amplifier channels.

What cables do I need to connect these speakers?

Use standard Speakon-to-Speakon PA cables from your amplifier to each cabinet's dual Speakon inputs. The cables aren't included, so factor that into your setup budget. For bi-amp operation, you'll need separate cables for each frequency range plus an active crossover between your mixer and amplifiers.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov