The FL-12MP floor monitors are built for performers who need to hear themselves clearly on stage. Whether you're a vocalist, guitarist, or keyboard player, these 300-watt RMS monitors deliver the stage sound you need to stay locked in with your band.

Each cabinet features a professional 12-inch woofer with a hefty 75 oz magnet and 3-inch voice coil, paired with a 1.5-inch titanium compression driver. This combination delivers full-range sound from 60 Hz to 20 kHz, ensuring you hear both the punch of your low end and the clarity of your highs during live performance.

The 8-ohm impedance and 97 dB sensitivity make these monitors easy to drive from most amplifiers, while the dual input options (1/4-inch and Speakon) give you flexibility in your signal chain. The 12 dB/18 dB per octave crossover at 3 kHz includes dual glass bulb tweeter protection to prevent damage during high-volume performances.

Built from 7-ply birch plywood with black carpet covering, these monitors handle the rigors of regular gigging. The angled cabinet design and steel recessed handles make positioning and transport straightforward. At 39 pounds per cabinet, they're substantial enough for professional use while remaining manageable for load-in and setup.

Each monitor includes dual inputs for daisy-chaining, and the pair works well for small to mid-sized venues up to 200 people. Seismic Audio backs the FL-12MP with a one-year warranty and ships factory-direct to keep costs down while maintaining build quality.

Technical Specifications

Frequently Asked Questions

What size venues can the FL-12MP pair handle?

These monitors work well for small to mid-sized venues accommodating up to 200 people. They're ideal for club gigs, wedding receptions, church services, and outdoor events where you need clear stage monitoring. For larger venues, consider adding a subwoofer or moving up to 15-inch monitors.

What cables do I need to connect these monitors?

You can use either 1/4-inch speaker cables or Speakon cables to connect from your amplifier or powered mixer. Each cabinet has two of each input type, allowing you to daisy-chain multiple monitors. Make sure to use speaker cables, not instrument cables, to handle the power properly.

Do I need a separate amplifier for these monitors?

Yes, these are passive monitors that require an external amplifier or powered mixer. Look for an amp that delivers 300-400 watts RMS per channel at 8 ohms to properly drive these cabinets. Many musicians run them from the monitor output of their powered mixer.

How do these compare to active monitors?

Passive monitors like the FL-12MP give you more flexibility in amplifier choice and typically cost less upfront. Active monitors have built-in amplification but are heavier and more expensive. If you already have amplification or want to upgrade your amp later, passive monitors are often the better choice.

Can I use these as main PA speakers instead of just monitors?

While designed primarily for floor monitoring, the FL-12MP pair can serve as a basic PA system for small acoustic performances or speaking events. For full-band PA use, you'll likely want to add a subwoofer and consider the angled cabinet design when positioning them as main speakers.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov