The SA-10M passive stage monitors give performers and sound engineers reliable stage monitoring without breaking the budget. This pair of 10-inch wedge monitors requires an external amplifier and delivers the vocal clarity and instrument definition musicians need to perform confidently.

Each monitor handles 100 watts RMS and 200 watts peak power through a professional-grade 10-inch woofer with 40 oz magnet and 2-inch voice coil. The 4x8-inch piezo horn tweeter cuts through stage volume to ensure vocals and lead instruments stay present in the mix.

The 45Hz to 20kHz frequency response captures both the low-end punch of bass guitar and the shimmer of cymbals. At 8-ohm impedance with 95dB sensitivity, these monitors work efficiently with most power amplifiers. Dual ports enhance low-frequency response while the ported design prevents power compression during long sets.

These monitors work well for bands playing clubs, theaters, and outdoor festivals with audiences up to 500 people. Churches use them for choir monitoring and contemporary worship bands. DJs and mobile performers appreciate the compact 13.25" x 14" x 21" footprint and built-in pocket handles for quick setup.

Each monitor features two 1/4-inch inputs for daisy-chaining or running separate monitor mixes. Connect from your mixing board's monitor outputs or dedicated monitor amplifier using standard speaker cables.

Seismic Audio backs the SA-10M pair with a one-year warranty and ships them ready for your next show. At 22 pounds per monitor, they're built for regular transport and professional use.

Technical Specifications

Frequently Asked Questions

What size venue can the SA-10M monitors handle?

These monitors work well for venues up to 500 people, including clubs, theaters, small outdoor festivals, and churches. The 100-watt RMS power handling and 95dB sensitivity provide enough output for most band and DJ applications without requiring massive amplifier power.

What amplifier do I need for the SA-10M monitors?

You'll need a power amplifier capable of delivering 100-200 watts per channel at 8 ohms. Most mixing boards with built-in monitor amplifiers work well, or you can use a dedicated monitor amp like Crown, QSC, or Peavey models. Standard speaker cables with 1/4-inch or Speakon connectors are required.

Can I daisy-chain multiple SA-10M monitors together?

Yes, each monitor has two 1/4-inch inputs specifically for daisy-chaining. You can run from your amplifier to the first monitor, then cable to additional monitors in the chain. Just ensure your amplifier can handle the combined impedance load of multiple 8-ohm monitors.

Do I need a subwoofer with these stage monitors?

For most stage monitoring applications, no subwoofer is needed. The 10-inch woofer and 45Hz frequency response provide adequate low-end for vocals, guitars, keyboards, and drums. However, bass-heavy acts or electronic music might benefit from adding a dedicated monitor subwoofer.

How do these compare to powered monitors?

The SA-10M passive monitors offer more flexibility since you choose your own amplifier and can easily replace or upgrade components. Powered monitors are more convenient with built-in amplification but typically cost more upfront. Passive monitors like these also tend to be more reliable for touring since there are fewer electronic components to fail.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov