Fury-12 - Powered 12 Inch 1000 Watt PA /DJ Loudspeaker with DSP, Built in Bluetooth, Mixer & Class D Amplifier

$284.99 $424.99

Fury-12 - Powered 12 Inch 1000 Watt PA /DJ Loudspeaker with DSP, Built in Bluetooth, Mixer & Class D Amplifier

$284.99 $424.99

The Fury-12 is a powered PA speaker built for DJs, bands, and mobile performers who need professional sound with integrated mixing capabilities. This 12-inch active speaker delivers 1000W peak power (500W RMS) through its Class D amplifier, handling mid-sized venues without requiring external amplification.

The speaker combines a 12-inch woofer with a 1.35-inch titanium compression driver, covering the full frequency range from 55Hz to 20kHz. Built-in DSP processing with four preset modes (PA, Monitor, Sub, Speech) optimizes performance for different applications, while the onboard two-channel mixer accepts microphones, instruments, and line sources through XLR/¼-inch combo inputs.

Peak output reaches 122dB SPL with 93dB sensitivity, providing enough volume for venues up to 200 people indoors. The 2.3kHz crossover and low 0.05% THD maintain clarity at high volumes. Built-in Bluetooth connectivity allows wireless audio streaming alongside wired sources.

Use this speaker for band performances, DJ sets, corporate presentations, and small to medium wedding receptions. The angled cabinet design works equally well as a main PA speaker on a pole mount or as a floor monitor, making it versatile for different stage configurations.

Connect microphones and instruments directly to the combo inputs, or link multiple speakers using the XLR male output. The molded ABS cabinet includes pole mount compatibility and multiple fly points for permanent installations.

Seismic Audio backs the Fury-12 with a one-year warranty and ships nationwide. At 36.2 pounds, this speaker balances portability with the power needed for professional mobile sound applications.

Technical Specifications

Spec Value
Power (Peak) LF 800W + HF 200W (1000W Total)
Power (RMS) LF 400W + HF 100W (500W Total)
Amplifier Type Class D
Woofer 12" with 30 oz magnet, 2.5" voice coil
HF Driver 1.35" titanium compression driver with wide dispersion horn
Frequency Response 55Hz - 20kHz
Max SPL 122dB
Sensitivity 93dB (1m/1W)
Impedance 4 ohms
Crossover 2.3kHz
THD ≤0.05%
DSP 48kHz sampling, 24-bit processing
Inputs 2x XLR/¼" combo jacks (mic, line, instrument)
Outputs XLR male
Connectivity Built-in Bluetooth
Onboard Mixer 2-channel with volume controls, Bluetooth volume
Cabinet Molded ABS construction with angled design
Dimensions 17.1" x 15.75" x 26.4"
Weight 36.2 lbs
Warranty One year
Recommended For DJ sets, band PA, corporate events, wedding receptions

Frequently Asked Questions

What size venue can the Fury-12 handle?

The Fury-12 works well for indoor venues accommodating up to 200 people, such as small wedding receptions, corporate meeting rooms, or intimate club performances. For outdoor events, expect effective coverage for crowds of 100-150 people depending on ambient noise and desired volume levels. The 122dB maximum SPL and 500W RMS power provide sufficient headroom for most small to medium-sized events.

Can I connect microphones and instruments directly to this speaker?

Yes, the Fury-12 includes a built-in two-channel mixer with XLR/¼-inch combo inputs that accept microphones, instruments, and line-level sources. You can plug a microphone into one channel and a guitar or keyboard into the other, with independent volume controls for each. The speaker also features built-in Bluetooth for wireless audio streaming from phones or tablets.

Do I need a subwoofer with the Fury-12?

For most applications, the Fury-12's 12-inch woofer provides adequate bass response down to 55Hz. However, if you're playing bass-heavy music genres like hip-hop or electronic dance music, or performing in larger venues, adding a subwoofer will enhance the low-end impact. The speaker includes a dedicated "SUB" DSP mode that optimizes it for use with an external subwoofer.

Can this speaker work as both a main PA and floor monitor?

Absolutely. The Fury-12's angled cabinet design makes it ideal for dual-purpose use as either a main PA speaker on a pole mount or as a floor monitor placed directly on stage. The DSP includes dedicated "PA" and "Monitor" modes that optimize the frequency response for each application, ensuring optimal sound whether pointing at the audience or back at performers.

What cables do I need to get started with the Fury-12?

The speaker accepts standard XLR or ¼-inch cables for wired connections - use XLR cables for microphones and ¼-inch cables for instruments like guitars or keyboards. If you're chaining multiple speakers together, you'll need an XLR male-to-female cable to connect from the output of one speaker to the input of the next. No additional cables are required for Bluetooth connectivity.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov
  • Free Same-Day Shipping
  • 1-year Warranty
  • 30-Day Money-Back Guarantee
  • Satisfaction Guarantee