The SA-100T delivers professional dual 10" power for bands, DJs, and venues that need reliable main PA coverage without the bulk of larger systems. This passive speaker cabinet handles the dynamic range of live vocals, full band mixes, and DJ sets with authority.

Each cabinet pumps out 600 watts peak power through two 10" woofers paired with a 6x12 titanium horn driver. The dual-woofer design moves more air than single-driver cabinets while maintaining a manageable 59-pound weight per cabinet.

The 4-ohm impedance rating means you can run a pair from most amplifiers rated at 300+ watts RMS without impedance matching issues. Frequency response spans 45Hz to 20kHz, capturing both the punch of kick drums and the clarity of vocal harmonies. The 97dB sensitivity rating ensures efficient power conversion, so you get strong output without overdriving your amplifier.

These work well for live bands playing clubs up to 200 people, DJ gigs in reception halls, or as the main speakers for church services in sanctuaries seating 150-300. The dual-port design extends low-frequency response, reducing the immediate need for a subwoofer in smaller venues.

Connect via dual 1/4" or dual Speakon inputs on the rear panel. Daisy-chain multiple cabinets for larger coverage areas. The cabinet includes a standard pole mount socket for speaker stands and recessed handles for transport.

Each SA-100T ships with a one-year warranty and fast delivery from Seismic Audio's warehouse network.

Technical Specifications

Frequently Asked Questions

What size venue can the SA-100T cover as a main PA speaker?

A pair of SA-100T cabinets can handle live music venues up to 200 people or DJ events for crowds up to 250-300, depending on the room acoustics and desired volume levels. For larger outdoor events, you'll want to add more cabinets or consider a subwoofer to extend coverage. The dual 10" configuration provides good mid-range punch for vocal clarity in these size venues.

Do I need a subwoofer with the SA-100T speakers?

For most indoor applications up to 200 people, the SA-100T's dual-port design and 45Hz low-frequency response provides adequate bass without a subwoofer. However, if you're running electronic music, hip-hop, or playing large outdoor events, adding a subwoofer will give you the deep bass extension and headroom for a fuller sound. The 4-ohm impedance makes it easy to integrate with most powered subwoofers.

What amplifier power do I need to drive these speakers properly?

You'll want an amplifier rated for 300-600 watts RMS into 4 ohms to properly drive the SA-100T. The 4-ohm impedance means most professional power amplifiers will deliver their rated power without strain. Avoid under-powering these speakers, as clipping from a weak amplifier can damage the drivers more easily than clean power from an appropriately sized amp.

Can I daisy-chain multiple SA-100T cabinets together?

Yes, the SA-100T includes parallel inputs that allow you to daisy-chain multiple cabinets from a single amplifier channel. However, remember that each additional 4-ohm cabinet reduces the total impedance load, so check your amplifier's minimum impedance rating. Most amps can handle two 4-ohm cabinets (2-ohm total load) but verify your specific amplifier's capabilities before connecting more than two.

What cables do I need to connect the SA-100T to my mixer or amplifier?

You can use either 1/4" speaker cables or Speakon cables to connect from your power amplifier to the SA-100T. Speakon connections are preferred for professional applications as they lock securely and handle high power more safely. Never use instrument cables or XLR cables for speaker connections, as these aren't designed for speaker-level signals and can be damaged.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov