The Jolt-6 is a 6" bass guitar replacement woofer designed for bassists rebuilding cabinets or upgrading tired speakers in existing rigs. This drop-in replacement delivers the punch and clarity your bass guitar deserves.

With 150 watts RMS and 300 watts peak power handling, the Jolt-6 drives low-end frequencies with authority while maintaining definition across the midrange. The 8-ohm impedance matches most bass guitar cabinet configurations, making installation straightforward.

The pressed steel chassis provides durability for heavy playing, while the 38-ounce magnet and 1.5" voice coil handle the dynamic range of modern bass guitars. The 80 Hz to 7 kHz frequency response captures the fundamental frequencies and harmonics that define your bass tone. At 92 dB sensitivity, it converts amplifier power efficiently into acoustic output.

Whether you're rebuilding a vintage 4x10 cabinet, upgrading a practice amp speaker, or building a custom bass rig, the Jolt-6 handles everything from fingerstyle jazz to aggressive rock and metal. It's equally suited for studio recording setups where clean, accurate bass reproduction matters.

The speaker features standard mounting dimensions for 6" bass guitar applications. Installation requires basic tools and speaker wire connections to your amplifier or cabinet's internal wiring.

Seismic Audio backs the Jolt-6 with a one-year warranty and fast shipping, giving you confidence in your bass rig upgrade.

Technical Specifications

Frequently Asked Questions

Will this speaker fit my existing bass guitar cabinet?

The Jolt-6 uses standard 6" mounting dimensions common in bass guitar applications. Measure your current speaker's mounting hole pattern and overall diameter to confirm compatibility. Most 6" bass guitar speakers share similar mounting specifications, but verify before ordering.

Can this handle the low frequencies from a 5-string bass or drop tunings?

Yes, the Jolt-6's 80 Hz low-frequency response handles the fundamental frequencies of low B strings and drop tunings effectively. The 38-ounce magnet and robust voice coil design provide the control needed for extended low-frequency performance without distortion.

How many of these do I need for a full bass guitar cabinet?

This depends on your cabinet configuration and power requirements. A single Jolt-6 works well for practice amps or small combo upgrades. For full-stack performance, consider multiple drivers – four Jolt-6 speakers in a 4x10 configuration can handle 600 watts RMS total.

What impedance will multiple Jolt-6 speakers create in my cabinet?

Each Jolt-6 is 8 ohms. Two in parallel create 4 ohms, four in parallel create 2 ohms, or you can wire them in series-parallel combinations. Calculate your total impedance based on your amplifier's minimum load requirements before finalizing your cabinet design.

Do I need any special cables or connections for installation?

Installation requires standard speaker wire to connect the Jolt-6 to your amplifier or cabinet's internal wiring. Use appropriate gauge wire for your power level – 16 gauge works for most bass guitar applications. No special connectors or crossovers are needed for basic replacement applications.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov