Professional road cases and rack enclosures demand reliable hardware that won't fail when you're miles from the nearest music store. The SARHW33 delivers 50 precision-engineered 1/4 inch pop rivets designed specifically for PA and DJ case construction and field repairs.

These aluminum pop rivets feature a 3/16" diameter shank with a grip range from 1/4" to 3/8", making them ideal for standard road case materials and thicknesses. The rivets require a pilot hole between 0.192" and 0.196" for proper installation, ensuring a secure, permanent fastening that withstands the rigors of transport and setup.

Whether you're building custom flight cases for your PA system, reinforcing worn corner joints on existing racks, or replacing failed hardware on DJ coffins, these rivets provide the structural integrity professional cases require. They work equally well for repairing amplifier racks, mixer cases, and cable trunks that see heavy touring use.

Mobile DJs, touring bands, and sound companies rely on these rivets for emergency repairs at venues and permanent case modifications in the shop. Keep a pack in your road kit for those inevitable hardware failures that happen at the worst possible moment.

Installation requires a standard pop rivet gun and the appropriate drill bit for pilot holes. Each rivet creates a permanent, tamper-resistant connection that maintains case structural integrity under load.

Seismic Audio stocks the hardware components touring professionals need to keep their rigs road-ready and their cases secure.

Technical Specifications

Frequently Asked Questions

What size pilot hole do I need for these 1/4 inch pop rivets?

Drill pilot holes between 0.192" and 0.196" diameter for proper rivet installation. A 13/64" drill bit (0.203") works well but may require slight adjustment depending on your material thickness. Always test fit on scrap material first to ensure proper grip and finished appearance.

Can these rivets handle the weight of loaded PA speakers in flight cases?

Yes, these 1/4 inch rivets provide excellent structural strength for standard road case applications including loaded speaker cabinets. The 1/4" to 3/8" grip range accommodates typical case wall thicknesses while maintaining proper clamping force. For maximum strength, space rivets according to your case manufacturer's specifications.

Will these work for repairing damaged corners on existing DJ cases?

These rivets excel at corner reinforcement and damaged hardware replacement on DJ coffins and mixer cases. Remove any damaged rivets first, drill out holes to the proper size if needed, then install new rivets using a standard pop rivet gun. The permanent connection restores structural integrity better than screws or bolts.

How many rivets do I typically need for building a custom rack case?

A standard 4-space rack case typically requires 24-32 rivets for basic construction, while larger cases or those with additional reinforcement may need 40-60 rivets. This 50-piece pack covers most single-case projects with spares for future repairs. Heavy-duty touring cases may require additional packs.

What tools do I need besides the rivets themselves?

You'll need a pop rivet gun (manual or pneumatic), appropriate drill bits for pilot holes, and a drill. A center punch helps mark hole locations accurately, and a deburring tool cleans up drilled holes for professional results. Most hardware stores rent pop rivet guns if you don't own one.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov