The LandSlide-8P is built for bands, DJ/musicians, and small venues that need professional mixing and amplification in one compact unit. This 8-channel powered mixer handles your entire front-of-house setup without requiring separate amplifiers or complex signal routing.

The built-in power amplifier delivers 150 watts RMS per channel at 8 ohms (250 watts at 4 ohms), providing clean power for passive PA speakers while the discrete mic preamps with +48V phantom power handle condenser mics and direct instrument inputs. The onboard DSP includes 16 effect simulations and a 5-band graphic EQ for room tuning.

Each of the 8 channels features gold-plated XLR and balanced 1/4" inputs, 2-band EQ (12kHz high, 80Hz low), and individual peak LEDs for gain staging. The aux bus allows external effects or monitor sends, while RCA inputs accommodate playback devices. Highly accurate 5-segment bargraph meters monitor your main mix levels.

This powered mixer works well for bands playing clubs up to 200 people, DJ setups in small to medium venues, or permanent installations in churches and meeting spaces. The dual speakON outputs per channel let you daisy-chain speakers or run separate zones.

Connect your mics, instruments, and playback sources directly to the mixer, then run speakON cables to your passive speakers. The balanced line outputs provide signal to additional amplifiers or recording devices when needed.

Seismic Audio backs the LandSlide-8P with a full warranty and ships fast from our warehouse. Professional features at a price point that makes sense for working musicians and venues.

Technical Specifications

Frequently Asked Questions

What size venues can the LandSlide-8P handle?

This powered mixer works well for venues up to 200 people, depending on your speaker efficiency and room acoustics. The 250 watts RMS per channel at 4 ohms provides sufficient power for most small to medium club gigs, church services, and DJ events in ballrooms or reception halls.

What cables do I need to connect speakers to this mixer?

You'll need speakON to speakON cables to connect your passive speakers to the LandSlide-8P's outputs. The mixer has 4 speakON outputs total (2 per amplifier channel), allowing you to run separate left/right mains or daisy-chain multiple speakers per side. Standard XLR and 1/4" cables handle your mic and instrument inputs.

Can I record directly from this mixer?

Yes, the LandSlide-8P has balanced line outputs that send your main mix to recording devices, additional amplifiers, or broadcast equipment. The control room output provides +22dBu unbalanced signal for monitoring or recording applications.

Do I need external effects processors with the built-in DSP?

The onboard DSP includes 16 effect simulations covering reverbs, delays, and other common live sound effects, which handles most basic mixing needs. However, you can still connect external effects processors through the aux send and return if you need specific sounds or higher-quality processing for studio applications.

How does this compare to separate mixer and amplifier setups?

The LandSlide-8P combines both functions in one unit, reducing setup time and cable runs while maintaining professional signal quality with 0.01% THD+N and +112dB signal-to-noise ratio. This integration is ideal for mobile setups, but separate components offer more flexibility for larger systems or when you need different power levels for various speaker zones.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov