The Quake-6_16Ohm is a 6-inch replacement woofer designed for DIY speaker builders and technicians repairing existing PA systems. With its 16-ohm impedance, this driver works particularly well in multi-speaker arrays and line configurations where impedance matching is critical.

This mid-range driver handles 50 watts RMS (100 watts peak) and covers the 500Hz to 5kHz frequency range, making it ideal for vocal reproduction and midrange clarity in live sound applications. The 95dB sensitivity ensures efficient power transfer, while the 1.5-inch voice coil and 30-ounce magnet provide reliable performance under continuous use.

The pressed steel chassis offers durability for mobile applications, and the paper cone delivers natural midrange response without harshness. At 4 pounds, it's substantial enough for professional use while remaining easy to handle during installations. The 16-ohm impedance makes it particularly useful for connecting multiple drivers in series or parallel configurations.

Common applications include building custom floor monitors for bands, replacing blown drivers in church sound systems, and creating specialized midrange cabinets for DJ setups. This driver works well in venues seating 100-200 people when properly paired with complementary drivers and amplification.

Installation requires standard speaker wire connections - no special cables needed. The driver comes ready to mount with standard hardware.

Backed by Seismic Audio's one-year warranty and direct shipping, the Quake-6_16Ohm delivers professional-grade replacement components at a practical price point for working musicians and sound technicians.

Technical Specifications

Frequently Asked Questions

What applications work best for a 16-ohm 6-inch driver?

The 16-ohm impedance makes this driver ideal for multi-speaker configurations where you need to wire multiple drivers in series or parallel. It's commonly used in custom floor monitor builds, replacing damaged drivers in existing PA cabinets, and creating dedicated midrange enclosures for live sound systems.

How many people can this driver handle in a venue?

When properly paired with tweeters and subwoofers in a complete system, this driver works well for venues seating 100-200 people. As a midrange-focused driver covering 500Hz to 5kHz, it handles vocal clarity and instrument definition but needs complementary drivers for full-range coverage.

What size cabinet should I build for this driver?

For optimal performance, this 6-inch driver works best in sealed enclosures of 0.5 to 1.0 cubic feet, or ported enclosures of 1.0 to 1.5 cubic feet. The specific tuning depends on your crossover points and intended frequency response, but these ranges provide good starting points for most applications.

Can I replace an 8-ohm driver with this 16-ohm version?

Swapping impedances changes your amplifier load and may affect crossover behavior if the original cabinet used passive crossovers. Check your amplifier's compatibility with 16-ohm loads and verify that any existing crossover components are designed for this impedance before making the switch.

What cables and connections does this driver need?

This is a raw driver that connects directly to amplifier outputs or crossover networks using standard speaker wire. You'll need 16-gauge or thicker wire for most applications, with the positive terminal typically marked on the driver basket. No special connectors or adapters are required.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov