The Quake 6" replacement driver is built for musicians, DJs, and sound techs who need to repair or upgrade their PA speakers with a reliable, professional-grade component. Whether you're replacing a blown driver or building a custom cabinet, this steel-frame speaker delivers the midrange clarity and punch your live sound depends on.

This 6" woofer handles 50 watts RMS and peaks at 100 watts, giving you clean output across the critical 500-5,000 Hz range where vocals and most instruments live. The 95 dB sensitivity means efficient power conversion, so you get solid volume without overdriving your amplifier.

Built around a 30-ounce magnet and 1.5" voice coil, this driver provides the magnetic strength needed for accurate reproduction under stage conditions. The pressed steel chassis resists flex and resonance, while the paper cone delivers natural midrange response that cuts through a mix. At 4 ohms impedance, it matches most PA speaker configurations and amplifier outputs.

Perfect for repairing floor monitors, replacing drivers in small PA cabinets, or building custom speakers for venues up to 150 people. Works well in 2-way designs when paired with appropriate tweeters, or as midrange drivers in larger 3-way systems.

Installation requires standard woofer mounting screws and speaker wire connections. Each driver weighs 4 pounds and ships ready to install.

Seismic Audio backs every Quake driver with a full one-year warranty. Professional-grade components at a price that keeps your sound system running without breaking your budget.

Technical Specifications

Frequently Asked Questions

What size venues can this 6" driver handle?

This driver works well for venues up to 150 people when used in properly designed cabinets. It's ideal for small clubs, coffee shops, practice spaces, and intimate acoustic performances. For larger venues, you'll want to use multiple cabinets or move up to larger drivers with more power handling.

Can I use this to replace any 6" speaker in my PA cabinet?

Not automatically - you need to match the impedance and power handling of your original driver. This is a 4-ohm driver rated for 50 watts RMS, so it will work as a direct replacement for speakers with similar specs. Check your cabinet's specifications or the markings on your old driver before ordering.

Do I need a crossover with this driver?

Yes, for most applications you'll need a crossover network to properly integrate this driver with tweeters or other speakers. This driver covers 500-5,000 Hz, so it's designed to work as part of a multi-driver system rather than as a full-range speaker. The crossover point and design depend on your specific cabinet configuration.

What connections and hardware do I need for installation?

You'll need speaker wire to connect the driver to your amplifier or crossover, plus mounting screws to secure it to your cabinet. Standard 6" speaker mounting holes and screws work with this driver's steel frame. No special connectors or adapters are required - just standard speaker wire connections to the terminals.

How does this compare to using a full-range 6" driver?

This driver is specifically designed for midrange frequencies (500-5K Hz), making it more accurate in that range than a full-range driver trying to cover everything. However, you'll need additional drivers for low bass and high treble. Full-range drivers are simpler for single-driver applications, but this midrange driver will give you better clarity and detail when used in a properly designed multi-way system.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov