The Quake 6" replacement drivers are built for DIY speaker builders and anyone needing reliable 6-inch woofer replacements. These 4-ohm drivers deliver the midrange punch and low-end response that keeps your PA system performing at its best.

Each driver handles 100 watts peak power with a robust 30-ounce magnet and 1.5-inch voice coil that drives consistent output across the 500Hz to 5kHz frequency range. The 95dB sensitivity ensures efficient power conversion, while the paper cone provides natural midrange reproduction that cuts through the mix.

The pressed steel chassis construction eliminates resonance and flex that can muddy your sound. At 4 ohms impedance, these drivers pair well with most amplifiers and can be wired in series for 8-ohm loads or parallel for 2-ohm configurations. The 500-5kHz frequency response makes them ideal for midrange duties in multi-way systems.

Perfect for replacing blown drivers in existing cabinets, building custom monitor wedges, or constructing mid-frequency arrays for live sound reinforcement. These drivers work well in sealed or ported enclosures for small to medium venues up to 200 people.

Each driver weighs 4 pounds and comes ready to install with standard mounting hardware compatibility. You get a matched pair for consistent stereo imaging and uniform frequency response across your system.

Seismic Audio backs these replacement drivers with a one-year warranty and ships them ready to restore your speakers to full performance.

Technical Specifications

Frequently Asked Questions

What impedance configurations can I wire these 4-ohm drivers in?

You can wire these 4-ohm drivers in series for an 8-ohm load, which works well with most guitar amps and home stereo amplifiers. Wiring them in parallel creates a 2-ohm load that's suitable for car audio applications or high-current amplifiers. Always check your amplifier's minimum impedance rating before connecting.

Can these drivers handle bass frequencies or do I need a subwoofer?

These drivers are optimized for midrange frequencies from 500Hz to 5kHz, so they won't reproduce deep bass below 500Hz effectively. For full-range PA systems, you'll want to pair them with dedicated woofers or subwoofers to cover the low end below 500Hz and tweeters for frequencies above 5kHz.

What size venues are these drivers suitable for?

Each driver produces 95dB sensitivity with 100 watts peak power, making them ideal for small to medium indoor venues up to 200 people. For larger spaces or outdoor events, consider multiple drivers or higher-powered alternatives. They work well for practice spaces, small clubs, and intimate acoustic performances.

Will these fit in my existing speaker cabinet?

These drivers use standard 6-inch mounting dimensions, but you should verify your cabinet's cutout diameter and mounting hole spacing before ordering. The pressed steel frame is designed to fit most conventional 6-inch speaker mounting configurations. Check that your cabinet can accommodate the 4-pound weight and magnet depth.

What cables or connections do I need to install these drivers?

These are raw drivers with standard speaker terminals that accept bare wire, spade connectors, or banana plugs. You'll need appropriate gauge speaker wire based on your amplifier power and cable length. The drivers don't include mounting screws, so ensure you have the correct hardware for your cabinet's mounting holes.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov