The SAST-4-8-15 insert snake is built for sound engineers and performers who need to integrate outboard effects and processors into mixing boards with TRS insert points. This 15-foot snake handles four channels of send/return connections, letting you patch in compressors, EQs, reverbs, and other processors without running individual cables across your setup.

This snake splits four TRS connections into eight separate TS connections, giving you dedicated send and return paths for each channel. The TRS end connects to your mixer's insert jacks, while the fantail breaks out to individual TS plugs that connect to your gear's inputs and outputs. Each channel is color-coded and numerically labeled for quick identification during setup and live use.

Built with 22-gauge high-purity copper conductors, the SAST-4-8-15 maintains signal integrity across all four channels. The 15-foot length provides enough reach for most stage and studio configurations while keeping cable runs manageable. Professional-grade connectors ensure reliable connections that won't fail during performance.

Perfect for live sound engineers running rack effects on vocal channels, guitarists integrating pedals through a mixing board, or studio producers who need to patch outboard gear into console inserts. Works with any mixer that uses quarter-inch TRS insert jacks and any effects processors with standard TS inputs and outputs.

Simply connect the TRS ends to your mixer's insert points and plug the corresponding TS connectors to your effects unit's input and output jacks. Everything you need is included in the box.

Seismic Audio backs every snake cable with a one-year warranty and ships nationwide.

Technical Specifications

Frequently Asked Questions

What's the difference between TRS and TS connectors on this snake?

The TRS (tip-ring-sleeve) connectors plug into your mixing board's insert jacks, which carry both send and return signals on one cable. The TS (tip-sleeve) connectors at the other end separate these into individual send and return paths - one TS plug goes to your effects unit's input, the other connects to the output.

Can I use this snake with any mixing board that has insert points?

Yes, this snake works with any mixer that uses quarter-inch TRS insert jacks. Most professional and semi-professional mixers use this standard configuration. Check your mixer's manual to confirm your insert points use TRS connections rather than XLR.

How do I connect my effects processor to this snake?

Connect the TRS end to your mixer's insert jack for the channel you want to process. Then connect one TS plug from that channel to your effects unit's input and the other TS plug to the effects unit's output. The color coding and numerical labels help you match the correct pairs.

What size venues work well with a 15-foot insert snake?

The 15-foot length works well for small to medium stages, club gigs, houses of worship, and studio setups where your mixer and effects rack are within reasonable proximity. For larger stages or when effects are positioned further away, consider a longer snake.

Do I need any additional cables to use this snake?

No additional cables are required. The SAST-4-8-15 provides all necessary connections between your mixer's insert points and your effects processors. Just make sure your effects units have quarter-inch TS input and output jacks.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov