The CoAx-10-Pair delivers 250 watts RMS per speaker in a true coaxial design that combines woofer and tweeter in a single point source. Perfect for DIY cabinet builders, replacement projects, and custom sound installations where you need professional-grade components at a direct price.

These 10-inch coaxial speakers handle both low and high frequencies from the same acoustic center, providing consistent coverage patterns and eliminating phase issues common with separate drivers. The 250W RMS power handling (500W peak) works with most amplifiers, while 97dB sensitivity ensures efficient output without excessive power demands.

The pressed steel chassis houses a 2.5-inch voice coil woofer with paper cone and cloth surround, plus a 1-inch voice coil compression driver for highs. Frequency response spans 50Hz to 18kHz at 8-ohm impedance. The Y30 woofer magnet weighs 44 ounces, with a 12-ounce Y35 tweeter magnet providing strong magnetic field strength for clean reproduction.

Use these speakers for stage monitors, main PA cabinets, or studio reference monitors in venues up to 200 people. They work well for live bands, DJ setups, church sound systems, and karaoke installations. The coaxial design makes them particularly effective for floor monitors where musicians need to hear both vocals and instruments clearly from a single source.

Standard speaker wire connects to your amplifier — no special cables required. Each speaker measures 10 inches diameter with a 9-inch cutout and 5.75-inch depth for cabinet design.

Backed by Seismic Audio's one-year warranty with direct technical support and fast shipping nationwide.

Technical Specifications

Frequently Asked Questions

What size venues can a pair of CoAx-10 speakers handle?

A pair of CoAx-10 speakers works well for venues up to 200 people when properly amplified. They're ideal for small to medium churches, club gigs, school auditoriums, and outdoor events where you need clear vocal and instrument reproduction. For larger venues, consider adding subwoofers or moving up to 12-inch or 15-inch speakers.

Do I need a subwoofer with these coaxial speakers?

The CoAx-10 handles frequencies down to 50Hz, covering most bass guitar and kick drum fundamentals adequately for many applications. However, if you're doing DJ work with electronic music, hip-hop, or modern rock that emphasizes deep bass, adding a subwoofer will provide fuller low-end response and allow the coaxial speakers to focus on midrange clarity.

What amplifier power do I need for these speakers?

These speakers handle 250W RMS each, so a stereo amplifier delivering 200-300 watts per channel at 8 ohms is ideal. You can use smaller amplifiers (100W+) for lower-volume applications, but avoid amplifiers significantly over 500 watts per channel to prevent speaker damage from clipping or overdrive.

Can I use these as replacement speakers in existing cabinets?

Yes, these work well as replacements if your cabinet has a 9-inch cutout diameter and at least 5.75 inches of mounting depth. The 8-slot mounting pattern fits most standard 10-inch speaker cabinets. Check your existing cabinet's impedance wiring to ensure compatibility with these 8-ohm speakers.

What cables do I need to connect these speakers?

Standard 12 or 14-gauge speaker wire connects these directly to your amplifier outputs. Use speakon or 1/4-inch connectors depending on your amplifier's outputs. No crossover or special wiring is needed since the coaxial design includes built-in frequency division between the woofer and compression driver components.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov