The SARHW24 chrome surface mount handles deliver professional durability for PA cabinets, DJ cases, and rack enclosures that take a beating on the road. Built for sound engineers, mobile DJs, and venue techs who need hardware that won't fail during transport or setup.

These heavy-duty handles mount flush to any flat surface, providing a secure grip point that distributes weight evenly across the mounting plate. The 16-gauge steel construction handles the stress of lifting loaded speaker cabinets and equipment cases without bending or breaking.

Each handle measures 3 7/8" x 3" overall with a 3 3/8" x 1 7/8" mounting plate that spreads load across a wide surface area. The nickel finish resists corrosion and maintains its professional appearance through years of use. Four mounting holes with 0.2-inch diameter accept standard screws for permanent installation.

Use these handles on custom PA builds, road case repairs, or when retrofitting older cabinets with reliable hardware. They work equally well on speaker enclosures, mixer cases, amp racks, or any equipment that needs a dependable carry point. The low-profile design won't snag on cables or interfere with stacking.

Installation requires basic wood screws or machine screws depending on your cabinet material (hardware sold separately). The pair provides balanced lifting points for two-person carries or single-handed repositioning of lighter gear.

Seismic Audio backs these handles with reliable performance and ships them ready to install on your next project or repair job.

Technical Specifications

Frequently Asked Questions

What size screws do I need to mount these handles?

The mounting holes are 0.2 inches in diameter, which accommodates #10 wood screws or 1/4-inch machine screws depending on your cabinet material. For plywood cabinets, use #10 x 1.5-inch wood screws. For metal cases, use 1/4-20 machine screws with nuts and washers for a secure attachment.

How much weight can these handles support?

The 16-gauge steel construction and wide mounting plate design can handle typical PA cabinet weights when properly installed into solid material. The handles distribute stress across the 3 3/8" x 1 7/8" mounting plate, making them suitable for loaded 12-inch and 15-inch speaker cabinets when used in pairs.

Will these handles work on existing speaker cabinets?

Yes, these surface-mount handles work on any cabinet with a flat mounting surface. They're commonly used to replace broken handles on older PA speakers or add carry points to custom builds. The mounting plate dimensions fit most standard handle cutouts, though you may need to drill new holes.

Do these handles stick out from the cabinet surface?

These are surface-mount handles that sit on top of the cabinet rather than recessing into it. The handle loop extends about 1 inch from the mounting surface, providing adequate clearance for gloved hands while maintaining a relatively low profile for stacking and transport.

How do these compare to recessed handles?

Surface-mount handles like the SARHW24 are easier to install since they don't require routing recesses into the cabinet. They provide the same carrying functionality as recessed handles but with a slightly higher profile. Choose surface-mount when you need quick installation or are retrofitting existing cabinets without handle recesses.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov