The FL-15MP Premium Floor Monitor delivers professional stage monitoring for musicians, bands, and performers who need to hear every detail of their mix clearly. Built with a 15" woofer and titanium compression driver, this wedge monitor cuts through stage noise to provide vocal clarity and instrument definition where you need it most.

This passive monitor handles 400 watts RMS with peaks up to 800 watts, driven by the combination of a heavy-duty 15" driver with 80 oz magnet and a 1.5" titanium compression driver. The 4"x10" horn design focuses sound directly at performers while the dual-port cabinet construction delivers full-range response from 60 Hz to 20 kHz.

The 8-ohm impedance matches standard amplifiers, while 98 dB sensitivity means efficient power use and strong output levels. The 12/18 dB per octave crossover at 3 kHz includes dual glass bulb tweeter protection to prevent driver damage during high-volume performances. Seven-ply birch plywood construction with acoustic damping material ensures durability and reduces unwanted cabinet resonance.

Use these monitors for live band performances, DJ monitoring, church sound systems, or studio applications. Each cabinet handles small to medium venues up to 200-300 people when properly amplified. The angled wedge design works on stage floors or can be pole-mounted for side-fill applications.

Connect via dual 1/4" inputs or dual Speakon connectors to your amplifier or powered mixer. Steel recessed handles and black carpet covering provide roadworthy durability for transport and setup.

Backed by Seismic Audio's one-year warranty with fast shipping to get your monitoring system up and running quickly.

Technical Specifications

Frequently Asked Questions

What size venue can the FL-15MP handle for stage monitoring?

The FL-15MP works well for small to medium venues up to 200-300 people when paired with adequate amplification. For larger venues or outdoor events, consider using multiple monitors or adding subwoofers to your monitoring system for fuller low-end response.

What amplifier power do I need to drive this monitor?

This 8-ohm monitor handles 400 watts RMS, so pair it with an amplifier rated for 300-500 watts at 8 ohms for optimal performance. Higher-powered amplifiers work fine as long as you don't overdrive the speakers - the built-in tweeter protection helps prevent damage from excessive levels.

What cables do I need to connect this monitor?

You can connect using standard 1/4" speaker cables or Speakon cables, depending on your amplifier outputs. Speakon connections provide more secure, professional connections for live sound applications. Never use instrument cables - only use proper speaker cables rated for the power levels.

Can I use this as a main PA speaker instead of just a monitor?

While the FL-15MP works as a main speaker for small venues, it's optimized as a floor monitor with its angled wedge design. For main PA use, consider Seismic Audio's main speakers which are designed for front-of-house applications with better horizontal dispersion patterns.

Do I need a subwoofer with this monitor for bass instruments?

The FL-15MP provides bass response down to 60 Hz, which covers most bass guitar and kick drum fundamentals adequately for monitoring purposes. For electronic music or if you need extended low-end response below 60 Hz, adding a subwoofer to your monitoring system will provide fuller bass reproduction.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov