The SATXSW-4x5 insert snake cable connects mixing consoles to outboard processors, effects units, and rack-mounted gear that require separate send and return paths. This 2-channel insert snake eliminates the need for multiple individual cables when patching processors into your console's insert points.

This 5-foot cable features four 1/4" TRS male connectors on one end and two XLR male plus two XLR female connectors on the other end, allowing you to route signals out to processors and back to your console in a single cable run. The balanced, shielded design maintains signal integrity and rejects RF interference in both studio and live sound applications.

Built with 22-gauge oxygen-free copper conductors, the cable delivers clean signal transmission for professional audio applications. Color-coded and numerically labeled wires make identification simple during setup and troubleshooting. Serviceable ends allow for field repairs when needed.

Perfect for connecting console insert points to compressors, EQs, reverb units, or multi-effects processors in recording studios, live venues, and houses of worship. The 5-foot length works well for rack-to-console connections where gear is positioned close to your mixing position.

Simply connect the TRS ends to your console's insert jacks and the XLR ends to your processor's inputs and outputs. Each channel uses one TRS connector for the send/return loop and one XLR male/female pair for the processor connection.

Backed by Seismic Audio's one-year warranty with fast shipping to get your signal chain connected and running smoothly.

Technical Specifications

Frequently Asked Questions

What equipment does this insert snake connect?

This cable connects mixing console insert points to outboard processors like compressors, EQs, reverb units, and multi-effects units. The TRS connectors plug into your console's insert jacks, while the XLR connectors connect to the processor's separate input and output jacks. It's designed for equipment that processes audio signals and returns them to the console.

How do I wire this cable to my console and processor?

Connect the four TRS male connectors to your console's insert points (typically labeled "Insert" or "Send/Return"). Connect the XLR male connectors to your processor's inputs and the XLR female connectors to the processor's outputs. Each channel uses one TRS connector paired with one XLR male/female pair.

Can I use this cable for microphone connections?

While this cable can carry microphone-level signals, it's specifically designed for console insert applications where you need to send a signal out for processing and return it to the console. For standard microphone connections, a regular XLR microphone cable would be more appropriate and cost-effective.

Will this work with my digital mixing console?

Yes, this cable works with any console that has 1/4" TRS insert jacks, whether analog or digital. Many digital consoles maintain TRS insert connections for outboard analog processors. Check your console's manual to confirm it has TRS insert points rather than digital-only connectivity.

How does this compare to using individual insert cables?

This snake cable replaces four individual TRS-to-dual-XLR insert cables with a single cable run, reducing cable clutter and setup time. It's more organized and professional-looking than multiple individual cables, especially useful when connecting multiple channels to a multi-channel processor or multiple single-channel processors mounted in the same rack.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov