The SA-Y7 splitter cable is built for musicians, DJs, and audio engineers who need to split a single stereo output into two separate mono channels. This 6-foot cable handles the common task of taking one 3.5mm stereo source and feeding it to two different destinations.

The cable features one 3.5mm stereo female jack that accepts your input source, then splits the left and right channels to separate 3.5mm male plugs. This design lets you send your laptop's headphone output to two different mixing boards, or split a phone's audio between a recorder and monitoring headphones simultaneously.

Built with shielded conductors and nickel-plated connectors, the SA-Y7 delivers reliable signal transfer without interference. The flexible black PVC jacket withstands regular handling, while molded strain relief at each connector prevents cable failure at stress points. At 6 feet long, it provides enough reach for most desktop and rack setups without excess cable management.

Use this splitter for DJ booth setups where you need to send the same mix to both main outputs and a recording device. It's also valuable for podcast recording, letting you monitor audio while simultaneously feeding a backup recorder. Musicians can split their backing track output between stage monitors and front-of-house mixing.

The SA-Y7 connects directly to any device with a standard 3.5mm headphone output. No additional adapters needed – plug in and split your signal immediately.

Seismic Audio backs every SA-Y7 with a one-year warranty and ships fast from our warehouse.

Technical Specifications

Frequently Asked Questions

What does this cable do exactly?

The SA-Y7 takes a stereo signal from one 3.5mm source and splits it into two separate 3.5mm outputs. The left channel goes to one male plug, the right channel to the other. This lets you send the same audio source to two different destinations simultaneously.

Can I use this to combine two inputs into one output?

No, this cable only works as a splitter, not a combiner. It's designed to take one stereo input and split it into two mono outputs. Using it backwards to combine signals can damage your equipment and won't produce the results you want.

Will this work with my DJ controller's headphone output?

Yes, the SA-Y7 works perfectly with DJ controllers, mixers, and audio interfaces that have 3.5mm headphone outputs. You can split your cue signal between monitoring headphones and a recording device, or send your mix to two different destinations.

What's the difference between this and a standard headphone splitter?

Standard headphone splitters duplicate the same stereo signal to multiple outputs. The SA-Y7 actually separates the left and right channels into individual mono outputs, giving you independent control over each channel at your destination devices.

Does the 6-foot length work for most setups?

Six feet provides enough reach for typical desktop DJ setups, home studios, and podcast recording stations. It's long enough to route between nearby equipment without excess cable clutter, but you may need an extension for larger installations or stage setups.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov