The SAXLX-6 Black is a 6-foot balanced XLR patch cable designed for professional audio applications where reliable signal transfer is essential. This male-to-female XLR cable connects mixers, amplifiers, equalizers, crossovers, and other balanced audio equipment in live sound systems, recording studios, and installed sound environments.

Built with 22-gauge oxygen-free copper conductors, this shielded cable maintains signal integrity across the full audio spectrum. The heavy-duty flexible rubber jacket protects the internal wiring while remaining manageable during setup and breakdown. Standard 3-pin XLR connectors ensure compatibility with professional microphones and balanced line-level equipment.

At 6 feet, this cable length works well for rack-mounted gear connections, short runs between stage boxes and mixers, or connecting nearby amplifiers to crossovers. The black jacket blends into most professional setups without drawing attention. This cable also functions as a microphone cable for dynamic and condenser mics.

The female connector attaches to your source output and the male connector attaches to your destination input. The balanced design naturally rejects noise and interference over longer runs compared to unbalanced connections.

This cable serves musicians, DJs, sound engineers, churches, podcasters, and recording studios. Seismic Audio backs this cable with a one-year warranty and ships it ready to use. Professional-grade construction at a practical price point makes it a reliable choice for working audio applications.

Technical Specifications

Frequently Asked Questions

What equipment can I connect with this XLR cable?

This cable connects any equipment with balanced XLR inputs and outputs, including mixers to amplifiers, crossovers to speakers, microphones to preamps, and audio interfaces to monitors.

Is 6 feet long enough for my setup?

Six feet works well for rack-mounted gear connections, nearby stage equipment, or short runs in smaller setups. For longer distances between front-of-house mixers and stage equipment, consider 25-foot or 50-foot cables instead.

Can this cable work as a microphone cable?

Yes, this XLR cable functions perfectly as a microphone cable for dynamic mics like the Shure SM58 or condenser microphones requiring phantom power. The balanced design and shielding make it suitable for both live performance and studio recording applications.

What's the difference between this and an unbalanced cable?

XLR cables are balanced, meaning they use three conductors (positive, negative, and ground) to cancel out noise and interference. This makes them superior to unbalanced cables for professional audio applications, especially over longer runs or in electrically noisy environments.

Does this cable require any special connectors or adapters?

No adapters needed—this cable has standard 3-pin XLR connectors that fit all professional audio equipment with XLR jacks. The female end plugs into outputs (like mixer sends) and the male end connects to inputs (like amplifier inputs).

Can I use this cable for DMX lighting applications?

While this cable will physically connect to DMX fixtures, it's not technically optimal for DMX applications. DMX requires 120-ohm impedance cables, while audio XLR cables typically use 75-ohm impedance. This impedance mismatch can cause signal reflections, data errors, or intermittent lighting control issues, especially over longer runs or in complex lighting networks. For reliable DMX operation, dedicated DMX cables are recommended, though this cable may work for short runs in simple setups.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov