The SA-Y23 stereo splitter cable solves a common problem for DJs, podcasters, and mobile performers who need to split one stereo audio source into two separate mono outputs. This 6-inch adapter connects to any device with a 3.5mm headphone jack and splits the left and right channels to individual outputs.

The cable takes a stereo signal from your laptop, phone, or audio interface and separates the left channel to one 3.5mm male plug and the right channel to the other. This makes it essential for DJ setups where you need to cue tracks in headphones while sending the main mix to speakers, or for podcasters who want to send different audio feeds to separate recording devices.

Built with a female 3.5mm stereo jack on the input side and dual male 3.5mm plugs on the output end, the SA-Y23 provides reliable signal splitting without degradation. The compact 6-inch length keeps your setup clean while providing enough reach for most applications.

Perfect for DJ booth setups, podcast recording studios, computer audio splitting, and live streaming configurations. Mobile DJs use it to split audio between their headphones and main speakers, while content creators rely on it to send audio to multiple recording devices simultaneously.

Simply plug your audio source into the female jack and connect your two destination devices to the male plugs. The cable comes ready to use with no additional adapters needed.

Seismic Audio backs the SA-Y23 with reliable construction and fast shipping, giving you professional-grade connectivity at a practical price point.

Technical Specifications

Frequently Asked Questions

What's the difference between this splitter and a regular headphone splitter?

Regular headphone splitters send the same stereo signal to multiple outputs, while the SA-Y23 separates the left and right channels into individual mono outputs. This makes it perfect for DJ applications where you need different audio on each output, rather than sharing the same music with friends.

Can I use this cable to connect my DJ controller to both speakers and headphones?

Yes, this is exactly what most DJs use it for. Connect your controller's cue output to the female jack, then run one male plug to your headphones and the other to your booth monitor or personal speaker. Each output will carry a different channel from your DJ software's cue mix.

Will this work with my smartphone or laptop audio output?

Absolutely. Any device with a standard 3.5mm headphone jack will work with this splitter. You can use it to send your phone's left channel audio to one device and the right channel to another, which is popular for streaming setups and content creation.

How long is the cable and will it reach in a typical DJ booth?

The SA-Y23 is 6 inches long, which works perfectly for tight DJ booth setups where your mixer and headphones are close together. The short length actually helps reduce cable clutter while still providing enough reach for most professional DJ configurations.

Do I need any other cables or adapters to make this work?

No additional adapters are needed if your devices have 3.5mm jacks. However, you may need 3.5mm to 1/4" adapters if you're connecting to professional audio gear with larger quarter-inch inputs. The cable comes ready to use right out of the package.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov