The Fury-15 pair delivers professional PA performance for bands, DJs, and venues that need powerful, versatile sound reinforcement. These active 15-inch speakers handle everything from club gigs to outdoor events with built-in mixing capabilities that eliminate external gear requirements.

Each speaker produces 1000 watts peak power (500W RMS per channel split as 400W LF + 100W HF) through a robust 15-inch woofer and 1.35-inch titanium compression driver. The integrated Class D amplifier drives clean, efficient power while the onboard DSP provides four speaker modes: PA, Monitor, SUB, and Speech for different applications.

The frequency response spans 55Hz-20KHz with 93dB sensitivity, delivering 123dB maximum SPL that easily covers venues up to 300 people indoors or 200 people outdoors. Built-in Bluetooth streaming pairs with the 2-channel mixer, accepting XLR and 1/4-inch inputs for microphones, instruments, and line sources. The angled cabinet design works as main PA speakers on poles or floor monitors.

Connect microphones, instruments, or mixing consoles directly to the dual combo inputs, then link speakers using the XLR male output for daisy-chaining. Each molded ABS cabinet includes pole mount compatibility and multiple fly points for permanent installation.

Seismic Audio backs the Fury-15 pair with a one-year warranty and ships ready to perform. Professional-grade components at a practical price point for working musicians and mobile performers.

Technical Specifications

Frequently Asked Questions

What size venue can the Fury-15 pair handle?

The Fury-15 pair covers venues up to 300 people indoors or 200 people for outdoor events. Each speaker delivers 123dB maximum SPL with wide dispersion, providing even coverage for medium-sized clubs, churches, conference rooms, and outdoor gatherings. For larger venues or bass-heavy music, consider adding a subwoofer.

What cables do I need to connect the Fury-15 speakers?

Each Fury-15 accepts XLR or 1/4-inch cables directly into the combo input jacks. Connect your microphone or instrument with standard XLR or 1/4-inch cables, then use an XLR cable to link the first speaker to the second via the male XLR output. No additional cables or adapters required for basic setup.

Can I use these as floor monitors?

Yes, the angled cabinet design makes the Fury-15 ideal for floor monitor use. Simply place them on the ground angled toward performers, switch to Monitor mode using the onboard DSP, and connect your mixing console or audio interface. The wide dispersion horn ensures even coverage across the stage.

Do I need a subwoofer with the Fury-15 pair?

The 15-inch woofers provide solid low-end response down to 55Hz, handling most music genres without a subwoofer. For electronic music, hip-hop, or applications requiring deep sub-bass below 50Hz, adding a subwoofer enhances the experience. The onboard SUB mode optimizes the speakers when used with an external subwoofer.

How does the built-in mixer work?

The onboard 2-channel mixer accepts two simultaneous inputs via combo XLR/1/4-inch jacks, with independent volume controls for each channel. Built-in Bluetooth adds wireless streaming with its own volume control. The mixer eliminates the need for external mixing equipment in simple setups with one or two sources.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov