The GH10M delivers focused stage monitoring for bands, DJs, and performers who need to hear themselves clearly in live sound environments. This passive wedge monitor puts your vocals and instruments right where you need them, whether you're performing on stage or monitoring from the mixing board.

Built around a 10-inch high-output woofer and 1-inch horn tweeter, the GH10M handles 300 watts RMS with a frequency response from 45 Hz to 20 kHz. The two-way design ensures vocals cut through while maintaining the low-end punch that keeps rhythm sections locked in. At 8 ohms impedance, it pairs easily with most power amplifiers and allows for daisy-chaining multiple monitors from a single amp channel.

This floor monitor works well for small to medium venues accommodating up to 200 people, club gigs, worship services, and rehearsal spaces. The wedge design angles sound directly toward performers while minimizing feedback. DJs appreciate the clarity for booth monitoring, while bands rely on it for vocal and instrument monitoring during live performances.

Connect via 1/4-inch TS jacks or raw speaker wire terminals to your power amp or monitor console. The rugged MDF cabinet features aviation-grade carpet covering, steel mesh grilles, and ABS corner guards to handle regular transport and stage use.

Seismic Audio backs the GH10M with reliable construction designed for working musicians. Fast shipping gets your monitor system ready for your next gig.

Technical Specifications

Frequently Asked Questions

What size venue works best with the GH10M monitor?

The GH10M handles small to medium venues up to 200 people effectively. It's ideal for club gigs, church services, corporate events, and rehearsal spaces where performers need clear monitoring without overwhelming the room. For larger outdoor festivals or concert halls, consider pairing multiple units or upgrading to higher-powered monitors.

What amplifier power do I need to drive this monitor?

You'll need a power amplifier rated between 300-600 watts at 8 ohms to properly drive the GH10M. Most monitor consoles and power amps in this range work well. The 8-ohm impedance makes it easy to connect to standard PA amplifiers and allows daisy-chaining multiple monitors from one amp channel.

Can I use this as a main PA speaker instead of just a monitor?

While the GH10M is designed primarily as a floor monitor, it can work for small venue sound reinforcement in a pinch. However, you'll get better coverage and sound quality using dedicated main PA speakers for your audience and reserving the GH10M for stage monitoring where it excels.

What cables do I need to connect this to my mixing board?

You'll need either 1/4-inch TS instrument cables or raw speaker wire, depending on your setup. If connecting to a monitor console or power amp with 1/4-inch outputs, use standard speaker cables. For raw wire connections, use 12-14 gauge speaker wire. The dual input options give you flexibility for different connection scenarios.

Do I need a subwoofer with this monitor for bass instruments?

The GH10M's frequency response extends down to 45 Hz, which covers most bass guitar and kick drum fundamentals adequately for monitoring purposes. Unless you're monitoring very bass-heavy electronic music or need extreme low-end, the 10-inch woofer provides sufficient bass response for most stage monitoring applications.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov