This 250K linear taper tone pot is designed for guitarists upgrading single-coil pickup guitars or performing routine maintenance on their instruments. The SAGA46 delivers the warm, balanced tone control that single-coil pickups need to cut through a mix without harshness.

The linear taper provides smooth, even tone roll-off across the entire range of the control, giving you precise command over your guitar's high-frequency response. At 250K ohms, this pot maintains the clarity and brightness that single-coil pickups are known for while allowing you to dial in just the right amount of warmth for your playing style.

The coarse knurled split shaft accommodates most aftermarket knobs and measures 6mm at the split, with a 15mm shaft length and 24mm base diameter. Easy-access solder lugs simplify installation whether you're doing the work yourself or having it done professionally. The linear taper curve ensures that tone changes happen gradually and predictably as you turn the control.

This replacement pot works with electric guitars from Fender, Gibson, Ibanez, Epiphone, Squier, ESP, Paul Reed Smith, Jackson, Yamaha, BC Rich, Schecter, Ernie Ball, and other manufacturers. It's particularly well-suited for Stratocasters, Telecasters, and other single-coil guitars where maintaining pickup clarity is essential.

Installation requires basic soldering skills and standard guitar wiring. Seismic Audio backs this component with reliable performance for your guitar modification or repair project.

Technical Specifications

Frequently Asked Questions

What's the difference between linear and audio taper pots for tone controls?

Linear taper pots provide even resistance change across the full rotation, making tone adjustments more predictable and gradual. Audio taper pots bunch most of the change toward one end of the rotation. For tone controls, linear taper gives you better control over the sweep, especially in the middle ranges where most players set their tone.

Will this 250K pot work with humbucker pickups?

While this pot will physically work with humbuckers, 500K pots are typically preferred for humbucker-equipped guitars. The 250K resistance can make humbuckers sound darker than intended. This pot is specifically designed for single-coil pickups like those found in Stratocasters and Telecasters.

What size knob fits the coarse knurled split shaft?

The 6mm split shaft with coarse knurling accepts most standard guitar knobs designed for split shafts. The knurling provides grip to prevent the knob from slipping during play. Most Fender-style and Gibson-style knobs will fit properly.

How difficult is it to install this replacement pot?

Installation requires basic soldering skills to connect the pickup and output wires to the appropriate lugs on the pot. If you're comfortable with simple electronics work, it's a straightforward repair. The solder lugs are positioned for easy access, but if you're not experienced with soldering, have a guitar technician handle the installation.

Can I use this pot to replace volume controls too?

While this pot could technically function as a volume control, tone pots and volume pots often have different taper requirements for optimal performance. This linear taper pot is specifically designed for tone control applications where you want smooth, even adjustment across the full range of the control.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov