The FL-10MP floor monitor pair delivers focused vocal and instrument clarity for performers who need to hear themselves on stage. Built for live bands, solo acts, and worship teams, these 10-inch monitors cut through ambient noise to keep performances tight and confident.

Each cabinet pushes 250 watts RMS with clean headroom up to 500 watts peak, giving vocalists and musicians the monitor volume they need without distortion. The 10-inch woofer handles vocals and midrange instruments, while the 1.5-inch titanium compression driver ensures cymbals and vocal presence cut through the mix.

The 65 Hz to 20 kHz frequency response covers everything from bass guitar fundamentals to vocal harmonics. At 96 dB sensitivity and 8-ohm impedance, these monitors work efficiently with most power amplifiers. The 3 kHz crossover point with 12/18 dB slopes keeps the vocal range clean and present. Dual ports enhance low-frequency response while the titanium horn provides wide, even high-frequency dispersion.

These monitors handle small clubs up to 150 people or outdoor stages where performers need personal monitoring without overwhelming the audience. The angled cabinet design sits naturally on stage floors, and the birch plywood construction withstands regular transport and setup.

Connect via dual 1/4-inch inputs or Speakon connector directly from your power amplifier or monitor mixer. Steel handles and carpeted finish handle the rigors of regular gigging.

Seismic Audio backs each pair with a one-year warranty and ships nationwide, delivering professional monitor performance without the premium price.

Technical Specifications

Frequently Asked Questions

What size venue can these floor monitors handle?

The FL-10MP pair works best in small to medium venues up to 150 people, such as clubs, coffee houses, small churches, and outdoor stages. With 250 watts RMS per cabinet and 96 dB sensitivity, they provide sufficient monitor volume for most live performance situations without overpowering smaller spaces.

What cables and amplifier do I need with these monitors?

You'll need a power amplifier capable of driving 8-ohm loads and either ¼-inch speaker cables or Speakon cables to connect from your amp to the monitors. Each cabinet can handle up to 250 watts RMS, so an amplifier with 200-300 watts per channel at 8 ohms provides optimal performance.

Do I need a subwoofer with these 10-inch monitors?

For vocal monitoring and most instruments, these 10-inch monitors provide adequate low-frequency response down to 65 Hz. However, if you're monitoring bass guitar or kick drum heavily, adding a subwoofer will give you fuller low-end reproduction and take strain off the monitor speakers.

How do these compare to active powered monitors?

These are passive monitors that require an external power amplifier, which gives you flexibility to choose your amplification and upgrade later. Active monitors have built-in amplifiers but cost more upfront. Passive monitors like the FL-10MP often provide better value when you already own amplification or want to power multiple cabinets from one amp.

Can I use these as main PA speakers instead of just monitors?

While designed as floor monitors, the FL-10MP can serve as small PA speakers for intimate acoustic performances or background music. However, for full-range PA use, you'd want to pair them with a subwoofer since their 65 Hz low-frequency limit won't reproduce deep bass instruments at full volume.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov