The SA-10M.3 floor monitors are built for performers who need to hear themselves clearly on stage. This pair of passive 2-way monitors delivers the vocal and instrument clarity essential for confident live performances, whether you're a solo acoustic act or part of a full band.

Each monitor combines a 10-inch woofer with a 4x8-inch piezo horn tweeter to cover the full frequency range from 40Hz to 20kHz. The result is clear vocal reproduction and solid low-end response that cuts through stage volume without feedback issues.

At 100 watts RMS and 200 watts peak power handling, these 8-ohm monitors work with most mixer power amp sections or dedicated monitor amplifiers. The 95dB sensitivity means they'll get loud without requiring excessive amplifier power. The 40-ounce magnet woofer with 2-inch voice coil provides the driver strength needed for consistent performance night after night.

These monitors handle small to medium venues — think coffee shops, clubs, or outdoor festivals with crowds up to 200 people. They work equally well for rehearsal spaces, house of worship applications, or mobile DJ setups where performers need stage monitoring. The angled cabinet design and pocket handles make positioning and transport straightforward.

Dual 1/4-inch inputs let you daisy-chain multiple monitors or connect directly from your mixer's monitor outputs. Standard speaker cables are all you need — no special connectors required.

Each monitor comes with Seismic Audio's standard warranty and ships ready to use. The rugged cabinet construction with metal corners and full metal grille handles the rigors of regular transport and setup.

Technical Specifications

Frequently Asked Questions

What size venues can these floor monitors handle?

The SA-10M.3 monitors work well for small to medium venues with audiences up to 200 people. They're ideal for coffee shops, clubs, small outdoor festivals, church services, and rehearsal spaces. The 100-watt RMS power handling and 95dB sensitivity provide enough volume to cut through typical stage noise without overwhelming smaller spaces.

What cables and connections do I need for these monitors?

These monitors use standard 1/4-inch inputs, so you'll need regular speaker cables with 1/4-inch plugs. You can connect them directly from your mixer's monitor outputs or power amplifier. The dual inputs on each monitor let you daisy-chain multiple units together or run separate feeds to each monitor depending on your setup needs.

Do I need a subwoofer with these 10-inch floor monitors?

For most stage monitoring applications, these monitors provide sufficient low-end response down to 40Hz without requiring a subwoofer. The 10-inch woofer handles bass guitar and kick drum fundamentals well enough for performers to hear their parts clearly. However, if you're monitoring bass-heavy electronic music or need deep sub-bass response, adding a subwoofer could enhance the low-end extension.

Can I use these as main PA speakers instead of just monitors?

While these are designed as floor monitors, they can work for small venue PA applications with audiences under 100 people. However, their angled cabinet design and frequency response are optimized for close-range monitoring rather than audience coverage. For main PA use, consider Seismic Audio's dedicated PA speakers which offer better projection and coverage patterns.

How do these compare to active monitors with built-in amplifiers?

These passive monitors require an external amplifier but offer more flexibility in power matching and system configuration. You can choose your preferred amplifier and easily replace it if needed. Active monitors are more convenient for simple setups but lock you into the built-in amplifier. Passive monitors like these also tend to be more reliable long-term since there are fewer electronic components to fail.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov